W58-124-9069910

W58-124-9069910 Datasheet

W58-124-9059910 W58-124-9019910 W58-124-9029910 W58-124-9069910 W58-124-9039910 W58-124-9049910

Part	Datasheet
W58-124-9069910	W58-124-9069910 (pdf)

Related Parts	Information
W58-124-9019910	W58-124-9019910

PDF Datasheet Preview
QTTM BNC 75 OHM COAXIAL CONNECTORS 1996 ITT Cannon manufactures the highest quality products available in the marketplace however these products are intended to be used in accordance with the specifications in this publication. Any use or application that deviates from stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of ITT Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to ITT Cannon products. Except for obligations assumed by ITT Cannon under this warranty, ITT Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence, or strict liability arising in connection with the design, manufacture, sale, use, or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form the same applies to orders based on development samples delivered. This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, ITT Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this publication is generally permitted, indicating the source. However, ITT Cannon’s prior consent must be obtained in all cases. QTBNC 11/96 Dimensions are shown in mm inch Dimensions subject to change QT BNC 75 ohm Coaxial Connectors Introduction This totally new termination technique provides a high pressure, gas tight center conductor joint of exceptional mechanical integrity, without crimping or having to solder the center contact. This connector can be terminated onto cable in less than 20 seconds, significantly reducing installation costs. The 75 BNC connector is designed to meet or exceed the requirements of digital telecommunications and digital video broadcast applications up to 2 GHz. To obtain additional technical information, pricing and delivery, please call ITT Cannon RF Products at 1-800 532-3750 or 860-223-2700 t Gas tight center conductor joint t Color coded rear cap for easy identification of cable types t Fast assembly application - two piece design with one crimping operation terminating inner and outer conductors t Knurled rear post for improved cable retention t Low VSWR/Insertion loss t Gold plated center contacts exceeding the corrosion requirements of MIL-C-39012 specification t Optional colored strain relief boot Introduction/Features 30,18 Dimensions are shown in mm inch Dimensions subject to change QT BNC 75 ohm Coaxial Connectors Specification Specification ELECTRICAL Impedance 75 nominal Frequency Range DC to GHz Voltage Rating At sea level = 500 V rms. Insulation Resistance 5000 minimum Contact Resistance Outer contact = initial. post environmental Braid to body = maximum Termination Resistance QT centre contact 3 maximum excluding pole resistance Voltage Standing Wave Ratio VSWR DC - 1 GHz maximum. 1 - 2 GHz maximum Contact Current Rating A dc maximum Insertion Loss dB maximum 2 GHz RF Leakage -60 dB typical up to 2 GHz Dielectric Withstanding Voltage DWV 1500 Vrms sea level Corona Level 375 Vrms minimum 21 km 70k feet MECHANICAL Insertion Force N 5 lbs maximum Coupling Mechanism Retention 445 N 100 lbs. minimum Ordering Guide Connector/Tooling Ordering Guide Straight Cable Plug Part Number Single Pack * W58-124-9059910 W58-124-9019910 W58-124-9029910 W58-124-9069910 W58-124-9039910 W58-124-9049910 Cable Type ATT 735A ATT 735A ATT 734 ATT 734 M17/29-RG59/U Belden 1694A Crimp Hex. Die Size 4,22 4,52 6,48 6,48 6,48 7,62 Center Conductor Diameter 0,40 ± 0,005 ± 0,40 ± 0,005 ± 0,79 ± 0,008 ± 0,79 ± 0,008 ± 0,57 ± 0,028 ± 1,02 ± 0,010 ± Combined Assembly/ Crimp Tool Part Number 050-000-0030030 050-000-0030020 050-000-0030040 050-000-0030050 050-000-0030040 050-000-0030010 Die Only Part Number 050-000-0030032 050-000-0030022 050-000-0030042 050-000-0030042 050-000-0030042 050-000-0030012 Calibration/Gaging Kit Part Number 050-000-0030033 050-000-0030023 050-000-0030043 050-000-0030043 050-000-0030043 050-000-0030013 In accordance with KS23558 * To obtain connectors supplied in bulk pack quantity 100 change last digit of part number to Connector Manufacturers Cross Reference ITT Cannon W58-124-9059910 W58-124-9029910 W58-124-9039910 W58-124-9049910 Kings 2025-44-9 2025-76-9 2025-36-9 2025-79-9 AMP 1-413589-0 413589-7 221185-2 221185-1 Amphenol 31-70072 7008-1000 31-70008 31-71064* * Amphenol also uses 31-71000-RFX-1 and 31-70000 Trompeter UPL220-735A UPL220-734 UPL220-RG59 UPL220-020 Canare None BCP-C4B BCP-C5B ADC BNC-735 BNC-734 BNC-59 BNC-1694 Gilbert NS-5722-5 GBNC-62P145 GBNC-62P145 GA-BNC-6-8AHS-342L Berg 28P374-6 28P374-5 28P374-1 None Strain Relief Boots If the connector application is such that the connector will experience extreme side loads i.e. 900 bends of cable , ITT Cannon recommends the use of the optional strain relief boot. The boot will transfer side loads exerted by the cable to the coupling nut, avoiding high stresses and interface movement. The boot also creates a more rugged connector for floor wiring applications and minimises dust ingress. The boot also comes in various colors to aid in application identification. Boot Part Number 33532-47-00 33532-47-01 33532-47-02 33532-47-03 33532-47-04 33532-47-05 33532-47-06 33532-47-07 33532-47-08 33532-47-09 Color Black Brown Red Orange Yellow Green Blue Violet Gray White NOTE These boots are suitable for use with Cable Types ATT 734, Belden 1694A and M17/29RG59/U only. Dimensions are shown in mm inch Dimensions subject to change QT BNC 75 ohm Coaxial Connectors BBAI-1243 QT BNC Plug for Braided Cable Assembly Instructions CRIMP FERRULE STANDARD

PDF Datasheet Preview

QTTM BNC 75 OHM COAXIAL CONNECTORS
1996

ITT Cannon manufactures the highest quality products available in the marketplace however these products are intended to be used in accordance with the specifications in this publication. Any use or application that deviates from stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of ITT Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to ITT Cannon products. Except for obligations assumed by ITT Cannon under this warranty, ITT Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence, or strict liability arising in connection with the design, manufacture, sale, use, or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form the same applies to orders based on development samples delivered. This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, ITT Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this publication is generally permitted, indicating the source. However, ITT Cannon’s prior consent must be obtained in all cases.

QTBNC 11/96

Dimensions are shown in mm inch Dimensions subject to change

QT BNC 75 ohm Coaxial Connectors

Introduction

This totally new termination technique provides a high pressure, gas tight center conductor joint of exceptional mechanical integrity, without crimping or having to solder the center contact. This connector can be terminated onto cable in less than 20 seconds, significantly reducing installation costs.

The 75 BNC connector is designed to meet or exceed the requirements of digital telecommunications and digital video broadcast applications up to 2 GHz.

To obtain additional technical information, pricing and delivery, please call ITT Cannon RF Products at 1-800 532-3750 or 860-223-2700
t Gas tight center conductor joint
t Color coded rear cap for easy identification of cable types
t Fast assembly application - two piece design with one crimping operation terminating inner and outer conductors
t Knurled rear post for improved cable retention
t Low VSWR/Insertion loss
t Gold plated center contacts exceeding the corrosion requirements of MIL-C-39012 specification
t Optional colored strain relief boot

Introduction/Features
30,18

Dimensions are shown in mm inch

Dimensions subject to change

QT BNC 75 ohm Coaxial Connectors

Specification

Specification

ELECTRICAL

Impedance 75 nominal

Frequency Range DC to GHz

Voltage Rating At sea level = 500 V rms.

Insulation Resistance 5000 minimum

Contact Resistance Outer contact = initial. post environmental

Braid to body = maximum

Termination Resistance QT centre contact 3 maximum excluding pole resistance

Voltage Standing Wave Ratio VSWR DC - 1 GHz maximum. 1 - 2 GHz maximum

Contact Current Rating A dc maximum

Insertion Loss dB maximum 2 GHz

RF Leakage -60 dB typical up to 2 GHz

Dielectric Withstanding Voltage DWV 1500 Vrms sea level

Corona Level 375 Vrms minimum 21 km 70k feet

MECHANICAL

Insertion Force N 5 lbs maximum

Coupling Mechanism Retention 445 N 100 lbs. minimum
Ordering Guide
Connector/Tooling Ordering Guide

Straight Cable Plug Part Number Single Pack *

W58-124-9059910 W58-124-9019910 W58-124-9029910 W58-124-9069910 W58-124-9039910 W58-124-9049910

Cable Type

ATT 735A ATT 735A ATT 734 ATT 734 M17/29-RG59/U Belden 1694A

Crimp Hex. Die Size 4,22 4,52 6,48 6,48 6,48 7,62

Center Conductor Diameter
0,40 ± 0,005 ± 0,40 ± 0,005 ± 0,79 ± 0,008 ± 0,79 ± 0,008 ± 0,57 ± 0,028 ± 1,02 ± 0,010 ±

Combined Assembly/ Crimp Tool Part Number
050-000-0030030 050-000-0030020 050-000-0030040 050-000-0030050 050-000-0030040 050-000-0030010

Die Only Part Number 050-000-0030032 050-000-0030022 050-000-0030042 050-000-0030042 050-000-0030042 050-000-0030012

Calibration/Gaging Kit Part Number
050-000-0030033 050-000-0030023 050-000-0030043 050-000-0030043 050-000-0030043 050-000-0030013

In accordance with KS23558 * To obtain connectors supplied in bulk pack quantity 100 change last digit of part number to

Connector Manufacturers Cross Reference

ITT Cannon W58-124-9059910 W58-124-9029910 W58-124-9039910 W58-124-9049910

Kings 2025-44-9 2025-76-9 2025-36-9 2025-79-9

AMP 1-413589-0 413589-7 221185-2 221185-1

Amphenol 31-70072 7008-1000 31-70008 31-71064*
* Amphenol also uses 31-71000-RFX-1 and 31-70000

Trompeter UPL220-735A UPL220-734 UPL220-RG59 UPL220-020

Canare None BCP-C4B BCP-C5B

ADC BNC-735 BNC-734 BNC-59 BNC-1694

Gilbert NS-5722-5 GBNC-62P145 GBNC-62P145 GA-BNC-6-8AHS-342L

Berg 28P374-6 28P374-5 28P374-1

None

Strain Relief Boots

If the connector application is such that the connector will experience extreme side loads i.e. 900 bends of cable , ITT Cannon recommends the use of the optional strain relief boot.

The boot will transfer side loads exerted by the cable to the coupling nut, avoiding high stresses and interface movement. The boot also creates a more rugged connector for floor wiring applications and minimises dust ingress.

The boot also comes in various colors to aid in application identification.

Boot Part Number 33532-47-00 33532-47-01 33532-47-02 33532-47-03 33532-47-04 33532-47-05 33532-47-06 33532-47-07 33532-47-08 33532-47-09

Color Black Brown Red Orange Yellow Green Blue Violet Gray White

NOTE These boots are suitable for use with Cable Types ATT 734, Belden 1694A and M17/29RG59/U only.

Dimensions are shown in mm inch

Dimensions subject to change

QT BNC 75 ohm Coaxial Connectors

BBAI-1243

QT BNC Plug for Braided Cable

Assembly Instructions

CRIMP FERRULE

STANDARD

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived W58-124-9069910 Datasheet file may be downloaded here without warranties.

Datasheet ID: W58-124-9069910 644072