PB-1SPP

PB-1SPP Datasheet

PB-1SPP

Part	Datasheet
PB-1SPP	PB-1SPP (pdf)

PDF Datasheet Preview
PB-1SPP Bluetooth 1SPP Peripheral Board USB-Dongle and Peripheral Boards The PB-1SPP is a Bluetooth Serial Port Profile SPP device that allows for a quick and easy wireless connection to transfer data between Bluetooth capable systems. An NXP BGB203/H1/S06 processor provides complete Bluetooth functionality as the embedded protocol stack runs on the PB-1SPP rather than on the host processor. The PB-1SPP requires the use of the USB-Dongle for power and the virtual COM port interface to the PC via the USB connection. The USB-Dongle and PB-1SPP can be used as a wireless serial port replacement to easily transfer data between two PC’s or for industrial control applications like M2M. A pair of USB-Dongle and PB-1SPP boards along with simple serial port communications software like HyperTerminal is all that you need to transfer wireless data. The USBDongle and PB-1SPP may also be used to communicate with other devices that are compatible with the Bluetooth Serial Port profile SPP . The USB-Dongle provides all power and interface signals required by the PB-1SPP to interface to the PC. Many other low cost Peripheral Boards are available for various functions and can also be used with the same USB-Dongle. Please consult the FDI website for details at Highlights • Low cost tool for prototyping, testing, and evaluation • USB port powered so no external Power Supply required • Supports USB • Plugs directly into standard USB Port via USB-Dongle great for laptops • BGB203 is preprogrammed for SPP • PIFA antenna designed into PCB • PB-1SPP uses BGB203/H1/S06 which provides Adaptive Frequency Hopping AFH Link Controller LC / Link Manager LM Logical Link and Adaptation Protocol L2CAP Service Discover Protocol SDP RFCOMM Protocol Generic Access Profile GAP Tested and qualified by Bluetooth SIG Flash-based configuration Automatic Re-connect Mode Low-power sleep mode Technical Details The PB-1SPP uses a PCB edge finger connector to interface to the USB-Dongle. Board Dimensions x Target Interface The USB-Dongle includes a 14 pin connector to the Peripheral Board that uses the following signals. Not all signals are used on all Peripheral Boards: ISP/ICPn Switched Power 3V for ICP or Reset High True for 8051 ISP Ground PCL/SCL ICP/I2C TXD UART MSIO SPI SCLK SPI 5V USB power, unswitched Reset Low True for ICP & LPC2000 ARM 3V unswitched PDA/SDA ICP/I2C RXD UART PSEN/P0.14 ISP entry MOSI SPI Example of USB-Dongle and PB-1SPP Wireless Serial Ports USB-DONGLE PB-1SPP PB-1SPP USB-DONGLE Power The USB-Dongle provides the regulated 3.3V power required by the PB-1SPP. Connectivity - Wireless connectivity on the PB-1SPP is controlled by the NXP BGB203 and supports 802.15.1/Bluetooth, and 802.11b/Wi-Fi, WLAN. Crystal or Clock Frequency - The PB-1SPP is clocked by an external 13 MHz crystal oscillator located at position Y1 on the PB. Typical Configuration The typical configuration shown above uses the PB-1SPP in conjunction with the USB-Dongle to provide the physical interface to the PC via the USB port. Software on the USB-Dongle provides a Virtual COM port interface to the PC and allows RS-232 serial data to be transmitted wirelessly using the PB-1SPP. A second set of boards may be used as the other side of the wireless connection or the PB-1SPP may also communicate with other compatible devices using the Bluetooth Serial Port profile SPP . Ordering Information Order Online at Digi-Key Part # 622-xxxx-ND Availability Stock Digi-Key Contact Info: 1-800-DIGI-KEY Phone 218 681-3380 FAX Contact Info: 800 278-0293 Phone 256 883-1241 FAX All brand names and product names are trademarks or registered trademarks of their respective holders.

PDF Datasheet Preview

PB-1SPP

Bluetooth 1SPP Peripheral Board

USB-Dongle and

Peripheral Boards

The PB-1SPP is a Bluetooth Serial Port Profile SPP device that allows for a quick and easy wireless connection to transfer data between Bluetooth capable systems. An NXP BGB203/H1/S06 processor provides complete Bluetooth functionality as the embedded protocol stack runs on the PB-1SPP rather than on the host processor. The PB-1SPP requires the use of the USB-Dongle for power and the virtual COM port interface to the PC via the USB connection.

The USB-Dongle and PB-1SPP can be used as a wireless serial port replacement to easily transfer data between two PC’s or for industrial control applications like M2M. A pair of USB-Dongle and PB-1SPP boards along with simple serial port communications software like HyperTerminal is all that you need to transfer wireless data. The USBDongle and PB-1SPP may also be used to communicate with other devices that are compatible with the Bluetooth Serial Port profile SPP . The USB-Dongle provides all power and interface signals required by the PB-1SPP to interface to the PC.

Many other low cost Peripheral Boards are available for various functions and can also be used with the same USB-Dongle. Please consult the FDI website for details at

Highlights
• Low cost tool for prototyping, testing, and evaluation
• USB port powered so no external Power Supply required
• Supports USB
• Plugs directly into standard USB Port via USB-Dongle great for laptops
• BGB203 is preprogrammed for SPP
• PIFA antenna designed into PCB
• PB-1SPP uses BGB203/H1/S06 which provides

Adaptive Frequency Hopping AFH Link Controller LC / Link Manager LM Logical Link and Adaptation Protocol

L2CAP Service Discover Protocol SDP RFCOMM Protocol Generic Access Profile GAP Tested and qualified by Bluetooth SIG Flash-based configuration Automatic Re-connect Mode Low-power sleep mode

Technical Details

The PB-1SPP uses a PCB edge finger connector to interface to the USB-Dongle.

Board Dimensions x

Target Interface

The USB-Dongle includes a 14 pin connector to the Peripheral Board that uses the following signals. Not all signals are used on all Peripheral Boards:

ISP/ICPn Switched Power 3V for ICP or Reset High True for 8051 ISP

Ground PCL/SCL ICP/I2C

TXD UART MSIO SPI SCLK SPI
5V USB power, unswitched Reset Low True
for ICP & LPC2000 ARM 3V unswitched

PDA/SDA ICP/I2C RXD UART

PSEN/P0.14 ISP entry MOSI SPI

Example of USB-Dongle and PB-1SPP Wireless Serial Ports

USB-DONGLE

PB-1SPP

PB-1SPP

USB-DONGLE

Power The USB-Dongle provides the regulated 3.3V power required by the PB-1SPP.

Connectivity - Wireless connectivity on the PB-1SPP is controlled by the NXP BGB203 and supports 802.15.1/Bluetooth, and 802.11b/Wi-Fi, WLAN.

Crystal or Clock Frequency - The PB-1SPP is clocked by an external 13 MHz crystal oscillator located at position Y1 on the PB.

Typical Configuration The typical configuration shown above uses the PB-1SPP in conjunction with the USB-Dongle to provide the physical interface to the PC via the USB port. Software on the USB-Dongle provides a Virtual COM port interface to the PC and allows RS-232 serial data to be transmitted wirelessly using the PB-1SPP. A second set of boards may be used as the other side of the wireless connection or the PB-1SPP may also communicate with other compatible devices using the Bluetooth Serial Port profile SPP .
Ordering Information

Order Online at Digi-Key Part # 622-xxxx-ND

Availability Stock Digi-Key Contact Info:
1-800-DIGI-KEY Phone 218 681-3380 FAX

Contact Info:
800 278-0293 Phone
256 883-1241 FAX

All brand names and product names are trademarks or registered trademarks of their respective holders.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PB-1SPP Datasheet file may be downloaded here without warranties.

Datasheet ID: PB-1SPP 635706