FLUKE-789 FC/T3000

FLUKE-789 FC/T3000 Datasheet

Fluke Connect 789 ProcessMeter/

Part	Datasheet
FLUKE-789 FC/T3000	FLUKE-789 FC/T3000 (pdf)

PDF Datasheet Preview
Fluke Connect 789 ProcessMeter/ Temp Kit Technical Data Now compatible with Fluke Connect Mobile App Double your power. The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect with ShareLive video call, process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm resistor, it eliminates the need to carry a separate resistor with you. Use the included FC Connector with the Fluke 789 and get the full benefits of the Fluke Connect mobile app. Download it now and get started. Fluke 789 Temp Kit features • Unique new wireless measurement logging capability • Temperature measurement from -200 °C to 1372 °C using the t3000 FC • 24 V Loop power supply • HART mode setting with loop power adds 250 ohm resistor • 100 % larger dual display • 1200 ohm drive capability on mA source • Enhanced backlight with two brightness settings • 0 % to 100 % mA Span Check buttons to toggle between 4 and 20 mA • Infrared I/O serial port compatible with Forms Software Version • Externally accessible fuses for easy replacement Built with See it. Save it. Share it. All the facts, right in the field. Fluke Connect with ShareLive video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android and iOS and works with over 20 different Fluke largest suite of connected test tools in the world. And more is on the way. Go to the Fluke website to find out more. Make the best decisions faster than ever before by viewing all temperature, mechanical, electrical and vibration measurements for each equipment asset in one place. Get started saving time and increasing your productivity. Download the app at: Smart phone not included with purchase. These 787 features are also included in the 789 • DMM designed to meet 1000 volt IEC 1010 CAT III standards • Precision 1000 V, 440 mA true-rms digital multimeter • Frequency measurement to 20 kHz • Min/Max/Average/Hold/Relative modes • Diode test and continuity beeper • Simultaneous mA and % of scale readout • 20 mA dc current source/loop calibrator/ simulator • Manual step 100 %, 25 %, Coarse, Fine plus Auto Step and Auto Ramp • Externally accessible battery for easy battery changes Measurement function V dc V ac true-rms mA dc A dc A ac Resistance Frequency Hz to 20 kHz Diode Test Continuity Range and resolution mV, V, V, V, 1000 V mV, V, V, V, 1000 V mA A continuous A continuous Ohms, k, k, k, M, 40 M Hz, Hz, kHz V shows diode voltage drop Beeps for resistance < approx. 100 ohms Output function DC Current Output Internal battery operation Range and resolution to mA or to mA selectable at power-up Over-range to mA DC Current Simulate Ext. 24 Volt loop supply 24 V Loop Supply to mA or to mA, selectable at power-up Over-range to mA Minimum 24 V Current Adjustment Modes Manual Coarse, Fine, 25 % and 100 % step Automatic Slow Ramp, Fast Ramp, 25 % step Temperature range of 18 °C to 28 °C, for one year after calibration Best accuracy % of reading + LSD % + 1 % + 2 % + 2 % + 2 1%+2 % + 1 % + 1 2%+1 Drive capability Ordering information Model FLUKE-789/T3000 FC Fluke Connect ProcessMeter/Temp Kit Includes 789 ProcessMeter, T3000FC Wireless K-type temperature module, FLUKEIR3000FC Connector, TL71 Premium Test Lead Set, AC72 Alligator Clips, four AA alkaline batteries installed , users manual and quick reference guide Optional accessories IR3000FC Fluke Connect Infrared Connector 80T-IR Infrared Temperature Probe 80TK Thermocouple Module 80T-150U Universal Temperature Probe TL20/TL22/TL24/TL26/TL28/TL40A Test Lead Sets AC20/AC80 Clips TP20 Industrial Test Probes 80i-400 AC Current Clamp* i410 AC/DC Current Clamp i1010 AC/DC Current Clamp C25/C100 Cases 80K-6/80K-40 High Voltage Probes 85RF High Frequency Probes PV350 Pressure Vacuum Module FOM Fiber Optic Meter LPAK80-4 LockPak TPAK ToolPak Meter Hanging Kit Above 50 A ac *Above 1 A dc or 20 A ac Fluke. Keeping your world up and Fluke Corporation PO Box 9090, Everett, WA 98206 U.S.A. Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call In the U.S.A. 800 443-5853 or Fax 425 446-5116 In Europe/M-East/Africa +31 0 40 2675 200 or Fax +31 0 40 2675 222 In Canada 800 -36-FLUKE or Fax 905 890-6866 From other countries +1 425 446-5500 or Fax +1 425 446-5116 Web access: 2014 Fluke Corporation. Specifications subject to change without notice. Printed in U.S.A. 2/2014 6002168A_EN Modification of this document is not permitted without written permission from Fluke Corporation. 2 Fluke Corporation Fluke Connect ProcessMeter/Temp Kit

PDF Datasheet Preview

Fluke Connect 789 ProcessMeter/

Temp Kit

Technical Data

Now compatible with Fluke Connect Mobile App

Double your power.

The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect with ShareLive video call, process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm resistor, it eliminates the need to carry a separate resistor with you.

Use the included FC Connector with the Fluke 789 and get the full benefits of the Fluke Connect mobile app. Download it now and get started.

Fluke 789 Temp Kit features
• Unique new wireless measurement logging capability
• Temperature measurement from -200 °C to 1372 °C using the t3000 FC
• 24 V Loop power supply
• HART mode setting with loop power
adds 250 ohm resistor
• 100 % larger dual display
• 1200 ohm drive capability on mA source
• Enhanced backlight with two brightness
settings
• 0 % to 100 % mA Span Check buttons to
toggle between 4 and 20 mA
• Infrared I/O serial port compatible with

Forms Software Version
• Externally accessible fuses for easy
replacement

Built with

See it. Save it. Share it. All the facts, right in the field. Fluke Connect with ShareLive video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android and iOS and works with over 20 different Fluke largest suite of connected test tools in the world. And more is on the way. Go to the Fluke website to find out more.

Make the best decisions faster than ever before by viewing all temperature, mechanical, electrical and vibration measurements for each equipment asset in one place. Get started saving time and increasing your productivity.

Download the app at:

Smart phone not included with purchase.

These 787 features are also included in the 789
• DMM designed to meet
1000 volt IEC 1010 CAT III standards
• Precision 1000 V, 440 mA true-rms digital multimeter
• Frequency measurement to 20 kHz
• Min/Max/Average/Hold/Relative modes
• Diode test and continuity beeper
• Simultaneous mA and % of scale readout
• 20 mA dc current source/loop calibrator/ simulator
• Manual step 100 %, 25 %, Coarse, Fine plus Auto Step and Auto Ramp
• Externally accessible battery for easy battery changes

Measurement function V dc V ac true-rms mA dc A dc A ac Resistance

Frequency Hz to 20 kHz Diode Test Continuity

Range and resolution mV, V, V, V, 1000 V mV, V, V, V, 1000 V mA A continuous A continuous Ohms, k, k, k, M, 40 M Hz, Hz, kHz V shows diode voltage drop Beeps for resistance < approx. 100 ohms

Output function DC Current Output

Internal battery operation

Range and resolution
to mA or to mA selectable at power-up Over-range to mA

DC Current Simulate Ext. 24 Volt loop supply
24 V Loop Supply
to mA or to mA, selectable at power-up Over-range to mA

Minimum 24 V

Current Adjustment Modes

Manual Coarse, Fine, 25 % and 100 % step Automatic Slow Ramp, Fast Ramp, 25 % step

Temperature range of 18 °C to 28 °C, for one year after calibration

Best accuracy % of reading + LSD
% + 1 % + 2 % + 2 % + 2 1%+2 % + 1
% + 1 2%+1

Drive capability
Ordering information

Model FLUKE-789/T3000 FC Fluke Connect ProcessMeter/Temp Kit

Includes 789 ProcessMeter, T3000FC Wireless K-type temperature module, FLUKEIR3000FC Connector, TL71 Premium Test Lead Set, AC72 Alligator Clips, four AA alkaline batteries installed , users manual and quick reference guide

Optional accessories IR3000FC Fluke Connect Infrared Connector 80T-IR Infrared Temperature Probe 80TK Thermocouple Module
80T-150U Universal Temperature Probe TL20/TL22/TL24/TL26/TL28/TL40A Test Lead Sets AC20/AC80 Clips TP20 Industrial Test Probes 80i-400 AC Current Clamp* i410 AC/DC Current Clamp** i1010 AC/DC Current Clamp** C25/C100 Cases 80K-6/80K-40 High Voltage Probes 85RF High Frequency Probes PV350 Pressure Vacuum Module FOM Fiber Optic Meter LPAK80-4 LockPak TPAK ToolPak Meter Hanging Kit
*Above 50 A ac **Above 1 A dc or 20 A ac

Fluke. Keeping your world up and

Fluke Corporation PO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands

For more information call In the U.S.A. 800 443-5853 or Fax 425 446-5116 In Europe/M-East/Africa +31 0 40 2675 200 or Fax +31 0 40 2675 222 In Canada 800 -36-FLUKE or Fax 905 890-6866 From other countries +1 425 446-5500 or Fax +1 425 446-5116 Web access:
2014 Fluke Corporation. Specifications subject to change without notice. Printed in U.S.A. 2/2014 6002168A_EN

Modification of this document is not permitted without written permission from Fluke Corporation.
2 Fluke Corporation Fluke Connect ProcessMeter/Temp Kit

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FLUKE-789FC/T3000 Datasheet file may be downloaded here without warranties.

Datasheet ID: FLUKE-789FC/T3000 635345