FLUKE-196BM

FLUKE-196BM Datasheet

MA190 Accessory Kit Accessory set for use with Fluke 190 Series ScopeMeter, containing the following accessories<br>• Ω BNC feedthrough terminator max. input voltage 5 V rms in safety

Part	Datasheet
FLUKE-196BM	FLUKE-196BM (pdf)

Related Parts	Information
FLUKE-196CM	FLUKE-196CM
FLUKE-199BM	FLUKE-199BM
FLUKE-199BM/003	FLUKE-199BM/003
FLUKE-199CM	FLUKE-199CM
FLUKE-199CM/003	FLUKE-199CM/003

PDF Datasheet Preview
MA190 Accessory Kit Accessory set for use with Fluke 190 Series ScopeMeter, containing the following accessories • Ω BNC feedthrough terminator max. input voltage 5 V rms in safety designed enclosure • Ω BNC feedthrough terminator, provides 10:1 signal attenuation max input voltage 5 V rms , in safety designed enclosure • Ω current shunt, 500 mA rms max, in safety designed BNC feedthrough enclosure • designed BNC to BNC cable 50 Ω , m 5 ft • to 4 mm banana plug adapter, safety designed • mm banana to banana adapter for interconnection to male banana test points and test leads Instrument configuration Included with the Fluke 190M Series ScopeMeter test tools are • MHz or 100 MHz ScopeMeter, Fluke 190C Series Color ScopeMeter or 190B Series ScopeMeter • Hard Shell Carrying Case • FlukeView ScopeMeter software • Serial interface adapter cable optically isolated • NiMH Battery Pack installed • Medical Accessory Kit see above • Battery Charger/Line Voltage Adapter • Voltage Probes set 1 red, 1 gray including hook clip, ground lead with mini alligator clip, ground lead with hook clip, 4 mm add-on probe tip, ground lead to 4 mm banana plug • manual on CD-ROM, in 9 languages English, French, German, Spanish, Portuguese, Italian, Chinese, Korean, Japanese . • Started’ booklet in English Ordering information Fluke 190CM models Fluke 199CM Color ScopeMeter 200 MHz / GS/s , medical version Fluke 196CM Color ScopeMeter 100 MHz / 1 GS/s , medical version Fluke 190BM models Fluke 199BM ScopeMeter 200 MHz / GS/s , medical version Fluke 196BM ScopeMeter 100 MHz / 1 GS/s , medical version Accessories MA190 Medical Accessory Kit included in 190M Series ScopeMeter carrying case, including PM9080 Serial Interface Adapter Cable optically isolated and SW90W FlukeView ScopeMeter Software included in 190M Series ScopeMeter Software for Provides documenting, archiving and analysis capabilities using the PC. Stores and prints waveform information, screen copies and measurement results. Plots measurement data into other application programs using DDE Direct Data Exchange . Allows for reference waveforms and user defined settings to be sent to the ScopeMeter test tool included in 190M Series ScopeMeter . Fluke Corporation P.O. Box 9090 Everett, WA USA 98206 Fluke Europe B.V. P.O. Box 1186 5602 BD Eindhoven The Netherlands For more information call In the U.S.A. 800 443-5853 or Fax 425 446-5116 In Europe/M-East/Africa +31 0 40 2 675 200 or Fax +31 0 40 2 675 222 In Canada 905 890-7600 or Fax 905 890-6866 From other countries +1 425 446-5500 or Fax +1 425 446-5116 Visit us on the world wide web at: 52 Hurricane Way Norwich Norfolk NR6 6JB United Kingdom Tel. 0207 942 0700 Fax 0207 942 0701 E-mail Visit us on the world wide web at: Fluke 190M Series ScopeMeters for Medical Equipment Applications Technical Data Speed, performance and analysis power of the 190 extended for use on medical and video applications The ScopeMeter 190M Series are high-performance oscilloscopes in a rugged, handheld and battery powered package, offering specifications typically found on top-end bench instruments only • MHz or 100 MHz bandwidth • Up to GS/s real-time sampling per input • Choice between a high-resolution Color display 190CM Series or a Black & White display 190BM Series • Digital Persistence for analyzing complex dynamic waveforms like on an analog scope • Fast display update rate for seeing dynamic signal behavior instantaneously • Automatic capture and replay of 100 screens • Connect-and-View automatic triggering and a full range of manual trigger modes • Automatic and cursor measurements • 27,500 points per input record length using ScopeRecord mode • TrendPlot paperless chart recorder for trend analysis up to 22 days • Waveform reference for visual comparisons and automatic ‘Pass / Fail’ testing of waveforms • Up to 1,000V independently floating isolated inputs • 1,000 V CAT II and 600 V CAT III safety certified • Four hours rechargeable Ni-MH battery pack The Fluke 190M Series offer additional capabilities targeting the service engineer dealing with Medical Imaging Equipment and Video Display Systems. For use on medical imaging equipment and high resolution video systems, the Fluke 190M Series offer capabilities not normally found on an oscilloscope: Current-over-Time measurement giving mAs read-out. Using the cursors, you can measure directly the amount of radiation produced by X-ray systems or the total amount of charge applied to a system. Dual channel operation is supported, so that a secondary signal may be used for determining the cursor position and timing the measurement period. Short duration overloads, which might occur due to the cable charge current peak, are automatically ignored so as not to disrupt the measurement result. Extended Video Triggering On top of the triggering capabilities for standard interlaced video systems that are part of the standard 190 Series, the medical extension supports triggering on high-resolution non-interlaced video systems. The 190M Series allows for detailed analysis of video information on any user selected video line number or triggering on ‘all lines’ from a high resolution video system. Smart averaging The smart averaging of the 190M Series gives an averaged curve over successive waveform acquisitions, thereby reducing noise in the displayed waveform. Thanks to smart averaging, you can also see an incidental curve of different waveshape with no effect on the averaged curve! This allows you to see the averaged curve of a sequence of video lines, for example, while also seeing the incidental fly-back line flash by! Smart averaging allows the oscilloscope to give an immediate response when the signal makes large changes, for instance when probing around different test points, while retaining the benefits associated with averaging! Extended offset Vertical offset is extended in the 190M Series to a maximum of 16 divisions, allowing vertical zoom-in for study of small details of the larger amplitude signal or when a larger DC-component is included. Digital persistence mode The digital persistence mode that is part of the standard 190C Series gives the ScopeMeter screen a decay similar to the decay of a traditional oscilloscope’s the decay time is selectable! In medical applications, this feature is most beneficial when working on complex and modulated signals and for displaying the envelopes of pulsed RF-carriers, like those encountered in MRI-systems. Additional accessory set MA190, suiting the specific needs of the medical imaging and video industries. The set includes three BNC feed-through adapters, each in a safety designed and isolated enclosure a current shunt for easy mAsmeasurements, a 50 ohm terminator to provide proper termination of video output signals, and a 50 ohm terminator with 10:1 signal attenuation that ensures optimal benefit of the extended offset range of the 190M Series ScopeMeter models. Furthermore, the set includes a safety designed BNC-cable, and test cable adapters. Current-over-time measurement using cursors, in dual channel mode on the Fluke 199CM Smart averaging shows the averaged curve of repeated signal parts, as well as incidental deviations Extended Offset is used here to zoom in a detail of a video reference line. 2 190 Series for Medical Persistence mode 190CM allows for capturing the envelope of RF-pulses Specification changes and additions For instruments that have the Medical extension installed, the full specification of the Fluke 190C Series or Fluke 190B Series ScopeMeters applies, with the following alterations. For full details compare to the technical datasheet of the Fluke 190 Series. Oscilloscope mode Acquisition and Display

PDF Datasheet Preview

MA190 Accessory Kit Accessory set for use with Fluke 190 Series ScopeMeter, containing the following accessories
• Ω BNC feedthrough terminator max. input voltage 5 V rms in safety
designed enclosure
• Ω BNC feedthrough terminator, provides 10:1 signal attenuation
max input voltage 5 V rms , in safety designed enclosure
• Ω current shunt, 500 mA rms max, in safety designed BNC
feedthrough enclosure
• designed BNC to BNC cable 50 Ω , m 5 ft
• to 4 mm banana plug adapter, safety designed
• mm banana to banana adapter for interconnection to male banana
test points and test leads

Instrument configuration Included with the Fluke 190M Series ScopeMeter test tools are
• MHz or 100 MHz ScopeMeter, Fluke 190C Series

Color ScopeMeter or 190B Series ScopeMeter
• Hard Shell Carrying Case
• FlukeView ScopeMeter software
• Serial interface adapter cable optically isolated
• NiMH Battery Pack installed
• Medical Accessory Kit see above
• Battery Charger/Line Voltage Adapter
• Voltage Probes set 1 red, 1 gray including hook clip, ground lead
with mini alligator clip, ground lead with hook clip, 4 mm add-on probe tip, ground lead to 4 mm banana plug
• manual on CD-ROM, in 9 languages English, French, German, Spanish, Portuguese, Italian, Chinese, Korean, Japanese .
• Started’ booklet in English
Ordering information

Fluke 190CM models Fluke 199CM Color ScopeMeter 200 MHz / GS/s , medical version Fluke 196CM Color ScopeMeter 100 MHz / 1 GS/s , medical version

Fluke 190BM models Fluke 199BM ScopeMeter 200 MHz / GS/s , medical version Fluke 196BM ScopeMeter 100 MHz / 1 GS/s , medical version

Accessories

MA190

Medical Accessory Kit included in 190M Series ScopeMeter
carrying case, including PM9080 Serial Interface

Adapter Cable optically isolated and SW90W FlukeView

ScopeMeter Software included in 190M Series ScopeMeter

Software for Provides
documenting, archiving and analysis capabilities using the PC.

Stores and prints waveform information, screen copies and
measurement results. Plots measurement data into other
application programs using DDE Direct Data Exchange . Allows
for reference waveforms and user defined settings to be sent to
the ScopeMeter test tool included in 190M Series ScopeMeter .

Fluke Corporation P.O. Box 9090 Everett, WA USA 98206

Fluke Europe B.V. P.O. Box 1186 5602 BD Eindhoven The Netherlands

For more information call In the U.S.A. 800 443-5853 or Fax 425 446-5116 In Europe/M-East/Africa +31 0 40 2 675 200 or Fax +31 0 40 2 675 222 In Canada 905 890-7600 or Fax 905 890-6866 From other countries +1 425 446-5500 or Fax +1 425 446-5116 Visit us on the world wide web at:
52 Hurricane Way Norwich Norfolk NR6 6JB United Kingdom Tel. 0207 942 0700 Fax 0207 942 0701 E-mail Visit us on the world wide web at:

Fluke 190M Series

ScopeMeters for Medical Equipment Applications

Technical Data

Speed, performance and analysis power of the 190 extended for use on medical and video applications

The ScopeMeter 190M Series are high-performance oscilloscopes in a rugged, handheld and battery powered package, offering specifications typically found on top-end bench instruments only
• MHz or 100 MHz bandwidth
• Up to GS/s real-time sampling per input
• Choice between a high-resolution Color display 190CM Series or a Black & White display 190BM Series
• Digital Persistence for analyzing complex dynamic waveforms like on an analog scope
• Fast display update rate for seeing dynamic signal behavior instantaneously
• Automatic capture and replay of 100 screens
• Connect-and-View automatic triggering and a full range of manual trigger modes
• Automatic and cursor measurements
• 27,500 points per input record length using ScopeRecord mode
• TrendPlot paperless chart recorder for trend analysis up to 22 days
• Waveform reference for visual comparisons and automatic ‘Pass / Fail’ testing of waveforms
• Up to 1,000V independently floating isolated inputs
• 1,000 V CAT II and 600 V CAT III safety certified
• Four hours rechargeable Ni-MH battery pack

The Fluke 190M Series offer additional capabilities targeting the service engineer dealing with Medical Imaging Equipment and Video Display Systems.

For use on medical imaging equipment and high resolution video systems, the Fluke 190M Series offer capabilities not normally found on an oscilloscope:

Current-over-Time measurement giving mAs read-out. Using the cursors, you can measure directly the amount of radiation produced by X-ray systems or the total amount of charge applied to a system. Dual channel operation is supported, so that a secondary signal may be used for determining the cursor position and timing the measurement period. Short duration overloads, which might occur due to the cable charge current peak, are automatically ignored so as not to disrupt the measurement result.

Extended Video Triggering On top of the triggering capabilities for standard interlaced video systems that are part of the standard 190 Series, the medical extension supports triggering on high-resolution non-interlaced video systems. The 190M Series allows for detailed analysis of video information on any user selected video line number or triggering on ‘all lines’ from a high resolution video system.

Smart averaging The smart averaging of the 190M Series gives an averaged curve over successive waveform acquisitions, thereby reducing noise in the displayed waveform. Thanks to smart averaging, you can also see an incidental curve of different waveshape with no effect on the averaged curve! This allows you to see the averaged curve of a sequence of video lines, for example, while also seeing the incidental fly-back line flash by! Smart averaging allows the oscilloscope to give an immediate response when the signal makes large changes, for instance when probing around different test points, while retaining the benefits associated with averaging!

Extended offset Vertical offset is extended in the 190M Series to a maximum of 16 divisions, allowing vertical zoom-in for study of small details of the larger amplitude signal or when a larger DC-component is included.

Digital persistence mode The digital persistence mode that is part of the standard 190C Series gives the ScopeMeter screen a decay similar to the decay of a traditional oscilloscope’s the decay time is selectable! In medical applications, this feature is most beneficial when working on complex and modulated signals and for displaying the envelopes of pulsed RF-carriers, like those encountered in MRI-systems.

Additional accessory set MA190, suiting the specific needs of the medical imaging and video industries. The set includes three BNC feed-through adapters, each in a safety designed and isolated enclosure a current shunt for easy mAsmeasurements, a 50 ohm terminator to provide proper termination of video output signals, and a 50 ohm terminator with 10:1 signal attenuation that ensures optimal benefit of the extended offset range of the 190M Series ScopeMeter models. Furthermore, the set includes a safety designed BNC-cable, and test cable adapters.

Current-over-time measurement using cursors, in dual channel mode on the Fluke 199CM

Smart averaging shows the averaged curve of repeated signal parts, as well as incidental deviations

Extended Offset is used here to zoom in a detail of a video reference line.
2 190 Series for Medical

Persistence mode 190CM allows for capturing the envelope of RF-pulses

Specification changes and additions For instruments that have the Medical extension installed, the full specification of the Fluke 190C Series or Fluke 190B Series ScopeMeters applies, with the following alterations. For full details compare to the technical datasheet of the Fluke 190 Series.

Oscilloscope mode

Acquisition and Display

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FLUKE-196BM Datasheet file may be downloaded here without warranties.

Datasheet ID: FLUKE-196BM 635336