FTLF1319P1BTL

FTLF1319P1BTL Datasheet

FTLF1319P1xTL

Part	Datasheet
FTLF1319P1BTL	FTLF1319P1BTL (pdf)

PDF Datasheet Preview
Finisar Product Specification Industrial Temperature 2 Gb/s RoHS Compliant Long-Wavelength Pluggable SFP Transceiver FTLF1319P1xTL PRODUCT FEATURES • Up to 2.125Gb/s bi-directional data links • Hot-pluggable SFP footprint • Built-in digital diagnostic functions • 1310nm Fabry-Perot laser transmitter • Duplex LC connector • RoHS compliant and Lead Free • No Rate Select input required for Fibre Channel 1x/2x Operation • Up to 10 km on 9/125um SMF • Metal enclosure, for lower EMI • Single 3.3V power supply • Low power dissipation <700mW typical • Industrial operating temperature range -40°C to 85°C • 1.25Gb/s 1000Base-LX Ethernet • Dual Rate / Gb/s Fibre Channel Finisar’s FTLF1319P1xTL Small Form Factor Pluggable SFP transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement MSA 4. They simultaneously comply with Gigabit Ethernet as specified in IEEE Std and 1x and 2x Fibre Channel as defined in FC-PI They are RoHS compliant and leadfree per Directive 2002/95/EC5 and Finisar Appl. Note AN-2038. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. PRODUCT SELECTION FTLF1319P1xTL Wide Extraction Bail Narrow Extraction Bail FTLF1319P1xTL Industrial Temp. SFP Product Specification November 2005 Finisar I. Pin Descriptions Name/Description Ref. VEET Transmitter Ground Common with Receiver Ground TFAULT Transmitter Fault. Not supported. TDIS Transmitter Disable. Laser output disabled on high or open. 4 MOD_DEF 2 Module Definition Data line for Serial ID. 5 MOD_DEF 1 Module Definition Clock line for Serial ID. 6 MOD_DEF 0 Module Definition Grounded within the module. Rate Select No connection required Loss of Signal indication. Logic 0 indicates normal operation. VEER

PDF Datasheet Preview

Finisar

Product Specification

Industrial Temperature 2 Gb/s RoHS Compliant Long-Wavelength Pluggable SFP Transceiver

FTLF1319P1xTL

PRODUCT FEATURES
• Up to 2.125Gb/s bi-directional data links
• Hot-pluggable SFP footprint
• Built-in digital diagnostic functions
• 1310nm Fabry-Perot laser transmitter
• Duplex LC connector
• RoHS compliant and Lead Free
• No Rate Select input required for Fibre Channel 1x/2x Operation
• Up to 10 km on 9/125um SMF
• Metal enclosure, for lower EMI
• Single 3.3V power supply
• Low power dissipation <700mW typical
• Industrial operating temperature range -40°C to 85°C
• 1.25Gb/s 1000Base-LX Ethernet
• Dual Rate / Gb/s Fibre

Channel

Finisar’s FTLF1319P1xTL Small Form Factor Pluggable SFP transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement MSA 4. They simultaneously comply with Gigabit Ethernet as specified in IEEE Std and 1x and 2x Fibre Channel as defined in FC-PI They are RoHS compliant and leadfree per Directive 2002/95/EC5 and Finisar Appl. Note AN-2038. Digital diagnostics
functions are available via the 2-wire serial bus specified in the SFP MSA.

PRODUCT SELECTION

FTLF1319P1xTL

Wide Extraction Bail Narrow Extraction Bail

FTLF1319P1xTL Industrial Temp. SFP Product Specification November 2005

Finisar

I. Pin Descriptions

Name/Description

Ref.

VEET

Transmitter Ground Common with Receiver Ground

TFAULT

Transmitter Fault. Not supported.

TDIS

Transmitter Disable. Laser output disabled on high or open.
4 MOD_DEF 2 Module Definition Data line for Serial ID.
5 MOD_DEF 1 Module Definition Clock line for Serial ID.
6 MOD_DEF 0 Module Definition Grounded within the module.

Rate Select No connection required

Loss of Signal indication. Logic 0 indicates normal operation.

VEER

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FTLF1319P1BTL Datasheet file may be downloaded here without warranties.

Datasheet ID: FTLF1319P1BTL 635205