FDB-1048

FDB-1048 Datasheet

FDB-1048 Wavelength Tuning Evaluation Board

Part	Datasheet
FDB-1048	FDB-1048 (pdf)

PDF Datasheet Preview
Key Features  Compact and portable design for field use with any laptop  No external power required powered off laptop USB port  User Friendly GUI allows for tuning by Wavelength, Frequency, or Channel Number  Able to wavelength tune an SFP+ or XFP module with the same box  Used for setting the Wavelength or Channel on Finisar’s Tunable XFP and Tunable SFP+ products FDB-1048 Wavelength Tuning Evaluation Board Overview The FDB-1048 is a USB-connected interface unit for T-XFP and T-SFP+ transceivers. Access to the I2C interface of the transceiver, as well as interfacing some other hardware signals such as MOD_ ABS, RX_LOS and TX_DISABLE is possible via a PC connection. This connection is made through USB via Windows built-in HID driver. A proprietary protocol controls and communicates with the processor in the FDB-1048 from the different PC applications. It has a convenient small and robust design, which together with the simple USBonly powered solution, makes it the perfect tool also for using in field applications. Applications include Part number and Serial number PID readouts and tuning a Tunable XFP or SFP+ transceiver. The three LEDs on the front panel represent bottom-top “Module Present”, “Activity” and “RX LOS”. 1389 Moffett Park Drive Sunnyvale, CA 94089-1133 Phone +1-408-548-1000 Sales +1-408-541-5690 Email: Visit Our Website 2015 Finisar Corporation. All rights reserved. Finisar is a registered trademark of Finisar Corporation. Features and specifications are subject to change without notice. 05/15 Parameter Value Size 30 mm H x 81 mm W x 167 mm D Weight Operating Temp 0 °C to +45 °C 32 °F to 113 °F Compliance XFP MSA Interface One XFP Port, Hot-pluggable one SFP+ Port, Hot-pluggable Management Port USB High-power device Supply Voltage 5V USB Power Consumption < 1W without transceivers Max Power Consumption 5W with dual-input USB mating cable, USB only delivers 2.5W Visual Indicators 3 LED status indicators Green for “Module Present”, “Activity” and “RX LOS”

PDF Datasheet Preview

Key Features
 Compact and portable design for field use with any laptop
 No external power required powered off laptop USB port
 User Friendly GUI allows for tuning by Wavelength, Frequency, or Channel Number
 Able to wavelength tune an SFP+ or XFP module with the same box
 Used for setting the Wavelength or Channel on Finisar’s Tunable XFP and Tunable SFP+ products

FDB-1048 Wavelength Tuning Evaluation Board

Overview

The FDB-1048 is a USB-connected interface unit for T-XFP and T-SFP+ transceivers. Access to the I2C interface of the transceiver, as well as interfacing some other hardware signals such as MOD_ ABS, RX_LOS and TX_DISABLE is possible via a PC connection. This connection is made through USB via Windows built-in HID driver. A proprietary protocol controls and communicates with the processor in the FDB-1048 from the different PC applications.

It has a convenient small and robust design, which together with the simple USBonly powered solution, makes it the perfect tool also for using in field applications. Applications include Part number and Serial number PID readouts and tuning a Tunable XFP or SFP+ transceiver.

The three LEDs on the front panel represent bottom-top “Module Present”, “Activity” and “RX LOS”.
1389 Moffett Park Drive Sunnyvale, CA 94089-1133 Phone +1-408-548-1000 Sales +1-408-541-5690 Email:

Visit Our Website
2015 Finisar Corporation. All rights reserved. Finisar is a registered trademark of Finisar Corporation. Features and specifications are subject to change without notice. 05/15

Parameter

Value

Size
30 mm H x 81 mm W x 167 mm D

Weight

Operating Temp
0 °C to +45 °C 32 °F to 113 °F

Compliance

XFP MSA

Interface

One XFP Port, Hot-pluggable one SFP+ Port, Hot-pluggable

Management Port

USB High-power device

Supply Voltage
5V USB

Power Consumption
< 1W without transceivers

Max Power Consumption 5W with dual-input USB mating cable, USB only delivers 2.5W

Visual Indicators
3 LED status indicators Green for “Module Present”, “Activity” and “RX LOS”

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FDB-1048 Datasheet file may be downloaded here without warranties.

Datasheet ID: FDB-1048 635189