CDK1307CILP40

CDK1307CILP40 Datasheet


CDK1307 Ultra Low Power, 20/40/65/80MSPS, 12/13-bit ADCs Rev 1B

Part Datasheet
CDK1307CILP40 CDK1307CILP40 CDK1307CILP40 (pdf)
Related Parts Information
CDK1307AILP40 CDK1307AILP40 CDK1307AILP40
CDK1307BILP40 CDK1307BILP40 CDK1307BILP40
CDK1307DILP40 CDK1307DILP40 CDK1307DILP40
PDF Datasheet Preview
Data Sheet

CDK1307

Ultra Low Power, 20/40/65/80MSPS, 12/13-bit Analog-to-Digital Converters ADCs

FEATURES n 13-bit resolution n 20/40/65/80MSPS max sampling rate n Ultra-Low Power Dissipation:
19/33/50/60mW n 72.4dB SNR at 80MSPS and 8MHz FIN n Internal reference circuitry n 1.8V core supply voltage n 3.6V I/O supply voltage n Parallel CMOS output n 40-pin QFN package n Pin compatible with CDK1308

APPLICATIONS n Medical Imaging n Portable Test Equipment n Digital Oscilloscopes n IF Communication

The CDK1307 is a high performance ultra low power Analog-to-Digital Converter ADC . The ADC employs internal reference circuitry, a CMOS control interface and CMOS output data, and is based on a proprietary structure. Digital error correction is employed to ensure no missing codes in the complete full scale range.

Two idle modes with fast startup times exist. The entire chip can either be put in Standby Mode or Power Down mode. The two modes are optimized to allow the user to select the mode resulting in the smallest possible energy consumption during idle mode and startup.

The CDK1307 has a highly linear THA optimized for frequencies up to Nyquist. The differential clock interface is optimized for low jitter clock sources and supports LVDS, LVPECL, sine wave, and CMOS clock inputs.

Functional Block Diagram
Ordering Information

Speed Package

CDK1307AILP40
20MSPS QFN-40

CDK1307BILP40
40MSPS QFN-40

CDK1307CILP40
65MSPS QFN-40

CDK1307DILP40
80MSPS QFN-40

Moisture sensitivity level for all parts is MSL-2A.

Pb-Free Yes

RoHS Compliant Yes

Operating Temperature Range -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C

Packaging Method Tray

Exar Corporation 48720 Kato Road, Fremont CA 94538, USA

Tel. +1 510 668-7000 - Fax. +1 510 668-7001
40 SLP_N 39 CM_EXTBC_0 38 CM_EXTBC_1 37 OVDD 36 OVDD 35 D_12 34 D_11 33 D_10 32 D_9 31 D_8

Data Sheet

Pin Configuration QFN-40

DVDD 1 CM_EXT 2

AVDD 3 AVDD 4

IP 5 IN 6 AVDD 7 DVDDCLK 8 CLKP 9 CLKN 10

CDK1307

QFN-40
30 D_7 29 D_6 28 D_5 27 CLK_EXT 26 OVDD 25 OVDD 24 ORNG 23 D_4 22 D_3 21 D_2

DVDD 11 CLK_EXT_EN 12

DFRMT 13 PD_N 14 OE_N 15 DVDD 16 OVDD 17 OVDD 18 D_0 19 D_1 20

Pin Assignments

Pin No. 0
1, 11, 16 2
3, 4, 7 5, 6 8 9 10 12 13 14
15 17, 18, 25, 26, 36, 37
19 20 21 22

Pin Name VSS DVDD

CM_EXT AVDD IP, IN

DVDDCLK CLKP CLKN

CLK_EXT_EN DFRMT PD_N

OE_N OVDD

Description Ground connection for all power domains. Exposed pad Digital and I/O-ring pre driver supply voltage, 1.8V Common Mode voltage output Analog supply voltage, 1.8V Analog input non-inverting, inverting Clock circuitry supply voltage, 1.8V Clock input, non-inverting format LVDS, LVPECL, CMOS/TTL, Sine Wave Clock input, inverting. For CMOS input on CLKP, Connect CLKN to ground CLK_EXT signal enabled when low zero . Tristate when high. Data format selection. 0 Offset Binary, 1 Two's Complement Full chip Power Down mode when Low. All digital outputs reset to zero. After chip power up always apply Power Down mode before using Active Mode to reset chip. Output Enable. Tristate when high I/O ring post-driver supply voltage. Voltage range to 3.6V

Output Data LSB, 13-bit output or 1Vpp full scale range
More datasheets: FES16ATR | FES16JT | CXA10-48S12 | CXA10-48S05 | CXA10-48D12 | CXA10-48D05 | CXA10-48S3V3 | CDK1307AILP40 | CDK1307BILP40 | CDK1307DILP40


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CDK1307CILP40 Datasheet file may be downloaded here without warranties.

Datasheet ID: CDK1307CILP40 512889