CXA10-48S05

CXA10-48S05 Datasheet

CXA10 Series Single and dual output

Part	Datasheet
CXA10-48S05	CXA10-48S05 (pdf)

Related Parts	Information
CXA10-48S12	CXA10-48S12
CXA10-48D12	CXA10-48D12
CXA10-48D05	CXA10-48D05
CXA10-48S3V3	CXA10-48S3V3

PDF Datasheet Preview
CXA10 Series Single and dual output DC/DC CONVERTERS 10W DC/DC Converters • 4:1 input voltage range • Approved to EN60950, UL1950, CSA C22.2 No. 950 • Operating ambient temperature of -40°C to +70°C in still air • High demonstrated reliability with conservative component deratings • Complies with ETS 300 019-1-3/2-3 • Complies with ETS 300 132-2 input voltage and current requirements • Fully compliant with ETS 300 386-1 • Pin compatible with NFC10 and BXA10 series • Basic insulation system input to output The CXA10 series comprising of five different models delivers single and dual output voltages covering 3.3V, 5V, 12V, ±5V, ±12 and ±15V. The series has a wide 4:1 input voltage range of 18 to 75VDC. The CXA10 has been designed as a competitive open-frame alternative for the communications market. The product is supplied in the industry standard footprint of x inches. Other product features include overvoltage protection, short circuit protection and remote on/off. All components are placed in a fully automated environment. Planar magnetics are used in the design to improve the reliability and reduce the profile of the DC/DC converter. The series has full international safety approval to EN60950 and UL1950 reducing system compliance costs, and it has a basic insulation system from input to output making it suitable for a wide variety of applications. All specifications are typical at nominal input, full load at 25°C unless otherwise stated 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage accuracy Line regulation LL to HL Singles/dual positives Dual negatives Load regulation not incl. cross reg. Full load to minimum load Min. load All outputs Ripple and noise 20MHz bandwidth 3.3V and 5.0V All others All models 30mV pk-pk 60mV pk-pk 12mV rms Temperature coefficient ±0.01%/°C Overvoltage protection Clamp type See table and Notes 3, 4 Short circuit protection Hiccup Short Continuous auto. recovery Transient response Min. load to FL Load cross regulation Min. load to FL See Note 1 INPUT SPECIFICATIONS Input voltage range 48Vin nominal 18 to 75VDC Input fuse See Note 10 1.5A HRC Max. input rise and fall time 48V ETS300 132-2 5V/ms UVLO turn ON voltage See Note 5 UVLO turn OFF voltage See Note 5 94% 86% Remote ON/OFF Logic compatibility ON OFF See Note 7 CMOS/TTL/Open Collector

PDF Datasheet Preview

CXA10 Series Single and dual output

DC/DC CONVERTERS 10W DC/DC Converters
• 4:1 input voltage range
• Approved to EN60950, UL1950, CSA C22.2 No. 950
• Operating ambient temperature of -40°C to +70°C in still air
• High demonstrated reliability with conservative component deratings
• Complies with ETS 300 019-1-3/2-3
• Complies with ETS 300 132-2 input voltage and current requirements
• Fully compliant with ETS 300 386-1
• Pin compatible with NFC10 and BXA10 series
• Basic insulation system input to output

The CXA10 series comprising of five different models delivers single and dual output voltages covering 3.3V, 5V, 12V, ±5V, ±12 and ±15V. The series has a wide 4:1 input voltage range of 18 to 75VDC. The CXA10 has been designed as a competitive open-frame alternative for the communications market. The product is supplied in the industry standard footprint of x inches. Other product features include overvoltage protection, short circuit protection and remote on/off. All components are placed in a fully automated environment. Planar magnetics are used in the design to improve the reliability and reduce the profile of the DC/DC converter. The series has full international safety approval to EN60950 and UL1950 reducing system compliance costs, and it has a basic insulation system from input to output making it suitable for a wide variety of applications.

All specifications are typical at nominal input, full load at 25°C unless otherwise stated
2 YEAR WARRANTY

SPECIFICATIONS

OUTPUT SPECIFICATIONS

Voltage accuracy

Line regulation LL to HL

Singles/dual positives Dual negatives

Load regulation not incl. cross reg.

Full load to minimum load

Min. load

All outputs

Ripple and noise 20MHz bandwidth
3.3V and 5.0V All others All models
30mV pk-pk 60mV pk-pk
12mV rms

Temperature coefficient
±0.01%/°C

Overvoltage protection Clamp type See table and Notes 3, 4

Short circuit protection Hiccup Short

Continuous auto. recovery

Transient response

Min. load to FL

Load cross regulation Min. load to FL See Note 1

INPUT SPECIFICATIONS

Input voltage range
48Vin nominal
18 to 75VDC

Input fuse

See Note 10
1.5A HRC

Max. input rise and fall time
48V ETS300 132-2
5V/ms

UVLO turn ON voltage See Note 5 UVLO turn OFF voltage See Note 5
94% 86%

Remote ON/OFF Logic compatibility ON OFF

See Note 7 CMOS/TTL/Open Collector

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CXA10-48S05 Datasheet file may be downloaded here without warranties.

Datasheet ID: CXA10-48S05 518433