S7U4E0020030000

S7U4E0020030000 Datasheet

S7U4E002003

Part	Datasheet
S7U4E0020030000	S7U4E0020030000 (pdf)

PDF Datasheet Preview
S7U4E002003 Micro GPS Evaluation Module - FEATURES z Micro Evaluation module for GPS Receiver with GPS Antenna z Easy to implement it into handy equipment by super compact design with single function z Supports optional micro USB I/F Board - SPECIFICATIONS z Receiving frequency z Sensitivity z TTFF z Accuracy z Datum z Interface z Power supply z Connector z Size z Optional USB I/F board 1575.45MHz, L1, C/A code Hot start -160dBm Warm/Cold start -146dBm 1 Hot start 5m WGS84 UART to 3.6V DF37NC-20DS Hirose Electric Adopted connector DF37C-20DP Hirose Electric 10 x 18 x mm S7U4E002A01 SEIKO EPSON • DIMENSIONS Unit mm SEIKO EPSON CORPORATION S7U4E002003 • BLOCK DIAGRAMS 20pin Connector CN2 VDD=2.7-3.6V 3pin Connector CN1 VDD GND #RESET Level shifter UART_SIN UART_SOUT PPS SDATARDY IFINT PONIN RTPWGD GPS module Reset IC Vdet=2.0 EEPROM 64kbit TCXO 26MHz X’tal 32.768kHz U.FL Connector 3pin Connector CN3 UART_SIN UART_SOUT 3pin Connector NC CN2 GND NC 3 in Connector NC CN1 NC Evaluation board/kit and Development tool important notice Antenna board This evaluation board/kit or development tool is designed for engineering evaluation, demonstration, or development purposes only. Do not use it for any other purpose. It is not intended to meet the requirements of design for a finished product. This evaluation board/kit or development tool is intended for use by an electronics engineer and is not a consumer product. The user should use these goods properly and safely. Seiko Epson does not assume any responsibility or liability of any kind if damage and/or fire is caused by its use. The user should cease to use the evaluation board/kit or development tool when any abnormal issue occurs, even during proper and safe use. The part used for this evaluation board/kit or development tool may be changed without any notice. NOTICE: No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. Seiko Epson Corporation 2011, All rights reserved MICRODEVICES OPERATIONS DIVISION

PDF Datasheet Preview

S7U4E002003

Micro GPS Evaluation Module
- FEATURES
z Micro Evaluation module for GPS Receiver with GPS Antenna
z Easy to implement it into handy equipment by super compact design with single function
z Supports optional micro USB I/F Board
- SPECIFICATIONS
z Receiving frequency z Sensitivity
z TTFF z Accuracy z Datum z Interface z Power supply z Connector
z Size z Optional USB I/F board
1575.45MHz, L1, C/A code Hot start -160dBm Warm/Cold start -146dBm 1 Hot start 5m WGS84 UART to 3.6V DF37NC-20DS Hirose Electric Adopted connector DF37C-20DP Hirose Electric 10 x 18 x mm S7U4E002A01 SEIKO EPSON
• DIMENSIONS Unit mm

SEIKO EPSON CORPORATION

S7U4E002003
• BLOCK DIAGRAMS
20pin Connector CN2

VDD=2.7-3.6V
3pin Connector CN1 VDD

GND #RESET

Level shifter

UART_SIN UART_SOUT PPS SDATARDY IFINT PONIN RTPWGD

GPS module

Reset IC Vdet=2.0

EEPROM 64kbit

TCXO 26MHz

X’tal 32.768kHz

U.FL Connector
3pin Connector CN3

UART_SIN UART_SOUT
3pin Connector NC CN2 GND NC
3 in Connector NC CN1 NC

Evaluation board/kit and Development tool important notice

Antenna board

This evaluation board/kit or development tool is designed for engineering evaluation, demonstration, or development purposes only. Do not use it for any other purpose. It is not intended to meet the requirements of design for a finished product.

This evaluation board/kit or development tool is intended for use by an electronics engineer and is not a consumer product. The user should use these goods properly and safely. Seiko Epson does not assume any responsibility or liability of any kind if damage and/or fire is caused by its use. The user should cease to use the evaluation board/kit or development tool when any abnormal issue occurs, even during proper and safe use.

The part used for this evaluation board/kit or development tool may be changed without any notice.

NOTICE:

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency.

All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.

Seiko Epson Corporation 2011, All rights reserved

MICRODEVICES OPERATIONS DIVISION

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived S7U4E0020030000 Datasheet file may be downloaded here without warranties.

Datasheet ID: S7U4E0020030000 511895