CPC1962G

CPC1962G Datasheet

CPC1962

Part	Datasheet
CPC1962G	CPC1962G (pdf)

PDF Datasheet Preview
CPC1962 AC Power Switch Parameter Ratings Units Blocking Voltage Load Current On State Voltage Drop Operating Voltage mArms Vrms at IL = 300 mArms Vrms The CPC1962 is an AC Solid State Switch using optical coupling with dual integrated SCR outputs to produce an ideal isolated triac driver. The CPC1962 switches are robust enough to provide a blocking voltage of up to 600VP. In addition, tightly controlled zero cross circuitry ensures switching of AC loads • Load Current up to 300 mArms • 600VP Blocking Voltage • 5mA Sensitivity Y • Zero-Crossing Detection • DC Control, AC Output • Optically Isolated R • TTL and CMOS Compatible • Low EMI and RFI Generation • High Noise Immunity A • Machine Insertable, Wave Solderable IN Applications • Triac Driver • Programmable Control IM • Process Control • Power Control Panels • Remote Switching • Gas Pump Electronics L • Contactors • Large Relays • Solenoids E • Motors PR • Heaters without the generation of transients. The input and output circuits are optically coupled to provide 3750Vrms of isolation and noise immunity between the control and load circuits. As a result the CPC1962 is well suited for industrial environments where electromagnetic interference could disrupt the operation of electromechanical relays. Approvals • UL recognized file # E69938 Ordering Information Part # CPC1962G CPC1962GS CPC1962GSTR Description 6-Pin DIP 50/Tube 6-Pin Surface Mount 50/Tube 6-Pin Surface Mount 1000/Reel Pin Configuration 1 + LED 6 AC Load 5 N/C 4 AC Load RoHS 2002/95/EC DS-CPC1962-R0B CPC1962 Absolute Maximum Ratings Parameter Ratings Blocking Voltage Input Control Current Units VP V Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Peak 10ms Input Power Dissipation 1 Total Package Dissipation 2 Isolation Voltage Input to Output 3750 Vrms Operational Temperature -40 to +85 °C Storage Temperature -40 to +125 °C 1 Derate Linearly 2 Derate Linearly Y Electrical absolute maximum ratings are at 25°C R Electrical Characteristics Parameters Conditions Symbol Min A Output Characteristics 25°C Operating Voltage Load Current, Continuous IN Off State Leakage Current On-State Voltage Drop Critical Rate of Rise VL = 600V ILEAK IL = 300mArms dv/dt

PDF Datasheet Preview

CPC1962

AC Power Switch

Parameter

Ratings

Units

Blocking Voltage Load Current On State Voltage Drop Operating Voltage
mArms

Vrms at IL = 300 mArms

Vrms

The CPC1962 is an AC Solid State Switch using optical coupling with dual integrated SCR outputs to produce an ideal isolated triac driver. The CPC1962 switches are robust enough to provide a blocking voltage of up to 600VP. In addition, tightly controlled zero cross circuitry ensures switching of AC loads
• Load Current up to 300 mArms
• 600VP Blocking Voltage
• 5mA Sensitivity

Y
• Zero-Crossing Detection
• DC Control, AC Output
• Optically Isolated

R
• TTL and CMOS Compatible
• Low EMI and RFI Generation
• High Noise Immunity

A
• Machine Insertable, Wave Solderable IN Applications
• Triac Driver
• Programmable Control

IM
• Process Control
• Power Control Panels
• Remote Switching
• Gas Pump Electronics

L
• Contactors
• Large Relays
• Solenoids

E
• Motors PR
• Heaters
without the generation of transients.

The input and output circuits are optically coupled to provide 3750Vrms of isolation and noise immunity between the control and load circuits. As a result the CPC1962 is well suited for industrial environments where electromagnetic interference could disrupt the operation of electromechanical relays.

Approvals
• UL recognized file # E69938
Ordering Information

Part # CPC1962G CPC1962GS CPC1962GSTR

Description 6-Pin DIP 50/Tube 6-Pin Surface Mount 50/Tube 6-Pin Surface Mount 1000/Reel

Pin Configuration
1 + LED
6 AC Load
5 N/C
4 AC Load

RoHS 2002/95/EC

DS-CPC1962-R0B

CPC1962

Absolute Maximum Ratings

Parameter

Ratings

Blocking Voltage

Input Control Current

Units VP V

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.

Peak 10ms

Input Power Dissipation 1

Total Package Dissipation 2

Isolation Voltage Input to Output
3750

Vrms

Operational Temperature
-40 to +85 °C

Storage Temperature
-40 to +125 °C
1 Derate Linearly 2 Derate Linearly

Y Electrical absolute maximum ratings are at 25°C

R Electrical Characteristics

Parameters

Conditions Symbol Min

A Output Characteristics 25°C

Operating Voltage Load Current, Continuous

IN Off State Leakage Current

On-State Voltage Drop Critical Rate of Rise

VL = 600V

ILEAK

IL = 300mArms
dv/dt

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CPC1962G Datasheet file may be downloaded here without warranties.

Datasheet ID: CPC1962G 523316