S5U13781R00C100

S5U13781R00C100 Datasheet

S5U13781R00C100 Reference Board User Manual

Part	Datasheet
S5U13781R00C100	S5U13781R00C100 (pdf)

PDF Datasheet Preview
S5U13781R00C100 Reference Board User Manual Issue Date 2012/03/26 SEIKO EPSON CORPORATION Evaluation board/kit and Development tool important notice This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or development purposes only. Do not use it for other purpose. It is not intended to meet the requirement of design for finished product. This evaluation board/kit or development tool is intended for use by an electronics engineer, and it is not a consumer product. The user should use these goods properly and safely. Seiko Epson dose not assume any responsibility and liability of any kind of damage and/or fire caused by usage of it. The user should cease to use it when any abnormal issue occurs, even during proper and safe use. The parts used for this evaluation board/kit or development tool may change without notice. NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. Seiko Epson Corporation X94A-G-004-01 Issue Date 2012/03/26 SEIKO EPSON CORPORATION 2012, All rights reserved. Table of Contents 1 Introduction 5 2 Features 6 3 Board Settings 7 CNF[2:0] Configuration 7 Jumper 8 Power Supply 9 VDDCORE 9 LED Back Light LED+/LED- Power 9 4 Connectors J4 Host Interface Connector 10 J5 Panel Interface 10 J8 J9 Connectors for Panel Connection 11 5 Others Quartz-Crystal Resonator for CLKI 12 SPI flash 12 6 Parts list 7 Schematic 8 Board Layout and Dimensions 9 References 10 Change X94A-G-004-01 Issue Date 2012/03/26 Seiko Epson Corporation Seiko Epson Corporation X94A-G-004-01 Issue Date 2012/03/26 Page 5 1 Introduction X94A-G-004-01 Issue Date 2012/03/26 Seiko Epson Corporation Page 6 2 Features The S5U13781R00C100 reference board includes the following features • QFP 100pin S1D13781F00A100 Display Controller • 2.54mm pitch vias for host bus interface header • 2.54mm pitch vias for LCD panel header • Connection area with 2.54mm pitch vias for header and FPC 0.5mm pitch 55 electrode connector to connect LCD panel. • On-board 24MHz crystal • On-board voltage booster for LED back light 38V 60mA Maximum output at 5V input • On-board voltage regulator with 1.5V output from 3.3V/5.5V input for COREVDD and PLLVDD for the S1D13781 • On-board 16Mbit SPI NOR FLASH standard memory Seiko Epson Corporation X94A-G-004-01 Issue Date 2012/03/26 Page 7 3 Board Settings CNF[2:0] Configuration The S1D13781 has three configuration inputs, CNF[2:0], which are used to configure the S1D13781 host interface type as described in Table 3-1, Signal Allocation for Host Interface. The S5U13781R00C100 reference board defaults to the SPI interface the default setting for CNF[2:0] = Table 3-1 Signal Allocation for Host Interface

PDF Datasheet Preview

S5U13781R00C100 Reference Board User Manual

Issue Date 2012/03/26

SEIKO EPSON CORPORATION

Evaluation board/kit and Development tool important notice

This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or development purposes only. Do not use it for other purpose. It is not intended to meet the requirement of design for finished product.

This evaluation board/kit or development tool is intended for use by an electronics engineer, and it is not a consumer product. The user should use these goods properly and safely. Seiko Epson dose not assume any responsibility and liability of any kind of damage and/or fire caused by usage of it. The user should cease to use it when any abnormal issue occurs, even during proper and safe use.

The parts used for this evaluation board/kit or development tool may change without notice.

NOTICE

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency.

All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.

Seiko Epson Corporation

X94A-G-004-01 Issue Date 2012/03/26

SEIKO EPSON CORPORATION 2012, All rights reserved.

Table of Contents
1 Introduction 5 2 Features 6 3 Board Settings 7

CNF[2:0] Configuration 7 Jumper 8 Power Supply 9

VDDCORE 9 LED Back Light LED+/LED- Power 9
4 Connectors

J4 Host Interface Connector 10 J5 Panel Interface 10 J8 J9 Connectors for Panel Connection 11
5 Others

Quartz-Crystal Resonator for CLKI 12 SPI flash 12
6 Parts list 7 Schematic 8 Board Layout and Dimensions 9 References 10 Change

X94A-G-004-01 Issue Date 2012/03/26

Seiko Epson Corporation

Seiko Epson Corporation

X94A-G-004-01 Issue Date 2012/03/26

Page 5
1 Introduction

X94A-G-004-01 Issue Date 2012/03/26

Seiko Epson Corporation

Page 6
2 Features

The S5U13781R00C100 reference board includes the following features
• QFP 100pin S1D13781F00A100 Display Controller
• 2.54mm pitch vias for host bus interface header
• 2.54mm pitch vias for LCD panel header
• Connection area with 2.54mm pitch vias for header and FPC 0.5mm pitch 55 electrode connector to connect LCD panel.
• On-board 24MHz crystal
• On-board voltage booster for LED back light 38V 60mA Maximum output at 5V input
• On-board voltage regulator with 1.5V output from 3.3V/5.5V input for COREVDD and PLLVDD for the S1D13781
• On-board 16Mbit SPI NOR FLASH standard memory

Seiko Epson Corporation

X94A-G-004-01 Issue Date 2012/03/26

Page 7
3 Board Settings

CNF[2:0] Configuration

The S1D13781 has three configuration inputs, CNF[2:0], which are used to configure the S1D13781 host interface type as described in Table 3-1, Signal Allocation for Host Interface.

The S5U13781R00C100 reference board defaults to the SPI interface the default setting for CNF[2:0] =

Table 3-1 Signal Allocation for Host Interface

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived S5U13781R00C100 Datasheet file may be downloaded here without warranties.

Datasheet ID: S5U13781R00C100 511887