S5U13513R00C100

S5U13513R00C100 Datasheet

S5U13513R00C100 User Manual

Part	Datasheet
S5U13513R00C100	S5U13513R00C100 (pdf)

PDF Datasheet Preview
S5U13513R00C100 User Manual Document Number X78A-G-004-01 Issue Date 2017/06/27 Evaluation board/kit and Development tool important notice This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or development purposes only. Do not use it for other purposes. It is not intended to meet the requirements of design for finished products. This evaluation board/kit or development tool is intended for use by an electronics engineer and is not a consumer product. The user should use it properly and in a safe manner. Seiko Epson dose not assume any responsibility or liability of any kind of damage and/or fire coursed by the use of it. The user should cease to use it when any abnormal issue occurs even during proper and safe use. The part used for this evaluation board/kit or development tool may be changed without any notice. NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You are requested not to use, to resell, to export and/or to otherwise dispose of the products and any technical information furnished, if any for the development and/or manufacture of weapon of mass destruction or for other military purposes. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. SEIKO EPSON CORPORATION 2016, All rights reserved. Table of Contents Introduction 1 Bus Interface 2 BeagleBone Black Board 2 Connecting the Beagle Black Bone Board 2 Pin Assignments 3 SPI 4 Description 4 Board Modifications 4 Pin Assignments 5 3 LCD Displays 6 WVGA and WQVGA Displays 6 Modifications for Hantronix HDA430-3GH-1 7 LVDS Displays 8 4 PWM Header 9 9 Pin Assignments 9 5 Power, Clock and Reset 10 5V 3.3V Clock 12 Reset 12 6 Parts List 13 7 Board Layout 16 8 Schematic Diagrams 17 S5U13513R00C100 User Manual Seiko Epson Corporation Introduction Introduction Top Side View Bottom Side View S5U13513R00C100 User Manual Seiko Epson Corporation Bus Interface Support Bus Interface Support BeagleBone Black Board The S5U13513R00C100 evaluation board connects to the BeagleBone Black board using the GPIOs on the P8 and P9 connectors. The BeagleBone Black board also provides 5V and 3.3V to the S5U13513R00C100 board through its P9 connector. Connecting the Beagle Black Bone Board As the S5U13513R00C100 evaluation board is designed as a Cape, the connectors H1_BBB_H8 and H2_BBB_P9 can be directly inserted into connectors P8 and P9 of the BeagleBone Black board. The following image shows the connectors on each board. H2_BBB_P9

PDF Datasheet Preview

S5U13513R00C100 User Manual

Document Number X78A-G-004-01 Issue Date 2017/06/27

Evaluation board/kit and Development tool important notice

This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or development purposes only. Do not use it for other purposes. It is not intended to meet the requirements of design for finished products.

This evaluation board/kit or development tool is intended for use by an electronics engineer and is not a consumer product. The user should use it properly and in a safe manner. Seiko Epson dose not assume any responsibility or liability of any kind of damage and/or fire coursed by the use of it. The user should cease to use it when any abnormal issue occurs even during proper and safe use.

The part used for this evaluation board/kit or development tool may be changed without any notice.

NOTICE

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You are requested not to use, to resell, to export and/or to otherwise dispose of the products and any technical information furnished, if any for the development and/or manufacture of weapon of mass destruction or for other military purposes.

All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.

SEIKO EPSON CORPORATION 2016, All rights reserved.

Table of Contents

Introduction 1

Bus Interface 2

BeagleBone Black Board 2 Connecting the Beagle Black Bone Board 2 Pin Assignments 3 SPI 4

Description 4 Board Modifications 4 Pin Assignments 5
3 LCD Displays 6

WVGA and WQVGA Displays 6 Modifications for Hantronix HDA430-3GH-1 7

LVDS Displays 8
4 PWM Header 9
9 Pin Assignments 9
5 Power, Clock and Reset 10
5V 3.3V

Clock 12 Reset 12
6 Parts List 13
7 Board Layout 16
8 Schematic Diagrams 17

S5U13513R00C100 User Manual

Seiko Epson Corporation

Introduction

Introduction

Top Side View

Bottom Side View

S5U13513R00C100 User Manual

Seiko Epson Corporation

Bus Interface Support

Bus Interface Support

BeagleBone Black Board

The S5U13513R00C100 evaluation board connects to the BeagleBone Black board using the GPIOs on the P8 and P9 connectors. The BeagleBone Black board also provides 5V and 3.3V to the S5U13513R00C100 board through its P9 connector.

Connecting the Beagle Black Bone Board

As the S5U13513R00C100 evaluation board is designed as a Cape, the connectors H1_BBB_H8 and H2_BBB_P9 can be directly inserted into connectors P8 and P9 of the BeagleBone Black board. The following image shows the connectors on each board.

H2_BBB_P9

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived S5U13513R00C100 Datasheet file may be downloaded here without warranties.

Datasheet ID: S5U13513R00C100 511877