82P-47-P-A

82P-47-P-A Datasheet

81P-47-P-A, 82P-47-P-A, 83P-55-P-A Pin, Vinyl Insulated, Butted Seam

Part	Datasheet
82P-47-P-A	82P-47-P-A (pdf)

Related Parts	Information
83P-55-P-A	83P-55-P-A

PDF Datasheet Preview
Specialty Terminals 81P-47-P-A, 82P-47-P-A, 83P-55-P-A Pin, Vinyl Insulated, Butted Seam Data Sheet February 2008 Product Number 81P-47-P-A 82P-47-P-A 83P-55-P-A Wire Range AWG 22-18 16-14 12-10 Pin Diameter Maximum Insulation Diameter Specifications Installation Information Wire Size Barrel Seam Maximum Voltage Rating: Maximum Operating Temp Maximum Current Insulator Material Terminal Material Terminal Plating: See Table Above Butted 600 V Building Wire 1000 V Signs or Fixtures Luminaires 167°F 75°C Same as Wire Vinyl Copper Tin Strip away the end 3/8 inch of wire insulation. Make the crimp the proper station of a recommended 3M Scotchlok Crimp Tool TH-440, TH-450 scissor style or TR-490 ratchet style hand tools. Barrel Crimp Electrical 1 of 2 Engineering Specification Crimp-Type pin terminals shall, electrically and mechanically, connect to a prestripped end of a stranded copper wire, and have a round pin portion for mounting under a screw, stud or inserting in a compatible terminal block. The pin terminal line shall offer barrel variations, variations in wire AWG size 2218, 16-14 and 12-10 and construction non-insulated butted seam, nylon insulated with insulation grip, etc. . Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty Limited Remedy Limited Liability: This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M and Scotchlok are trademarks of 3M Company. Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800 245 3573 FAX 800 245 0329 Please recycle. 3M 2008 All rights reserved. 78-8127-6845-1_A 2 of 2

PDF Datasheet Preview

Specialty Terminals
81P-47-P-A, 82P-47-P-A, 83P-55-P-A Pin, Vinyl Insulated, Butted Seam

Data Sheet

February 2008

Product Number
81P-47-P-A 82P-47-P-A 83P-55-P-A

Wire Range AWG
22-18
16-14
12-10

Pin Diameter

Maximum Insulation Diameter

Specifications Installation Information

Wire Size Barrel Seam Maximum Voltage Rating:

Maximum Operating Temp Maximum Current Insulator Material Terminal Material Terminal Plating:

See Table Above Butted 600 V Building Wire 1000 V Signs or Fixtures Luminaires 167°F 75°C Same as Wire Vinyl Copper Tin

Strip away the end 3/8 inch of wire insulation. Make the crimp the proper station of a recommended 3M Scotchlok Crimp Tool TH-440, TH-450 scissor style or TR-490 ratchet style hand tools.

Barrel Crimp Electrical
1 of 2

Engineering Specification

Crimp-Type pin terminals shall, electrically and mechanically, connect to a prestripped end of a stranded copper wire, and have a round pin portion for mounting under a screw, stud or inserting in a compatible terminal block.

The pin terminal line shall offer barrel variations, variations in wire AWG size 2218, 16-14 and 12-10 and construction non-insulated butted seam, nylon insulated with insulation grip, etc. .

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty Limited Remedy Limited Liability:

This product will be free from defects in material and manufacture at the time of purchase. 3M

MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3M and Scotchlok are trademarks of 3M Company.

Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800 245 3573 FAX 800 245 0329

Please recycle. 3M 2008 All rights reserved. 78-8127-6845-1_A
2 of 2

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 82P-47-P-A Datasheet file may be downloaded here without warranties.

Datasheet ID: 82P-47-P-A 519063