S5U13T03D00C000

S5U13T03D00C000 Datasheet

Connecting the S5U13522C100S00 Evaluation Board 8 SW1 Host Interface Selection 8 SW2 SPI Channel Selection for Resources 9 Chapter 4 Use Case Programming Examples 10 Use Case Initialization 10 Use Case Display an Image 11 Use Case Displaying Text 12 Use Case Entering Sleep/Suspend Mode and Waking Up 13 Use Case Updating the Display 14 Use Case Using Layers 23 Chapter 5 References 26

Part	Datasheet
S5U13T03D00C000	S5U13T03D00C000 (pdf)

PDF Datasheet Preview
Jane-TCON EPD Demo Unit User Manual SEIKO EPSON CORPORATION Evaluation board/kit and Development tool important notice This evaluation board/kit or development tool is designed to be used for engineering evaluation, demonstration, or development purposes only. Do not use it for any other purpose. It is not intended to meet the requirement of design for finished product. This evaluation board/kit or development tool is intended for use by an electronics engineer, and it is not the product for consumer. The user should use this goods properly and safely. Seiko Epson does not assume any responsibility and liability of any kind of damage and/or fire caused by the use of it. The user should cease to use it when any abnormal issue occurs, even during proper and safe use. The part used for this evaluation board/kit or development tool is subject to change without notice. NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. SEIKO EPSON CORPORATION 2012, All rights reserved Table of Contents Chapter 1 Introduction 5 Chapter 2 Features 7 Chapter 3 Setup and Configuration 8 Connecting the S5U13522C100S00 Evaluation Board 8 SW1 Host Interface Selection 8 SW2 SPI Channel Selection for Resources 9 Chapter 4 Use Case Programming Examples 10 Use Case Initialization 10 Use Case Display an Image 11 Use Case Displaying Text 12 Use Case Entering Sleep/Suspend Mode and Waking Up 13 Use Case Updating the Display 14 Use Case Using Layers 23 Chapter 5 References 26 S5U13522C100S00 E Paper Display PICtail Plus Board EPSON EPSON S5U13522C100S00 E Paper Display PICtail Plus Board Chapter 1 Introduction Chapter 1 Introduction This manual describes the setup and operation of the Jane-TCON EPD Demo Unit. The Jane_TCON EPD Demo is a self contained demo unit intended for evaluation and demonstration of Pervasive Displays PDI EPD panels and Epson timing controller chips for these panels. The unit is made of • Jane board • PDI EPD panel • Plastic enclosure The unit is powered by an internal Li-Ion rechargeable battery or from a USB connection. The battery is charged by power from the USB connection. The unit has an Epson TCON, S1D13T03, and typically has mounted a panel from PDI. The board can also use a or 2” EPD panel from PDI. The main processor on the board is an Epson MCU, S1C17801, which has embedded an USB controller. The demos software, including the images are stored on a microSD card. Figure 1-1 Jane-TCON EPD Demo Unit Top View S5U13522C100S00 E Paper Display PICtail Plus Board EPSON Chapter 2 Jane-TCON EPD Demo Unit Overview Chapter 2 Jane-TCON EPD Demo Unit Overview Power The demo unit has a Li-Ion rechargeable battery, coin cell, LIR2450, 3.6V, 100mAh. When fully charged it will provide power for aproximately 1000 updates of the display. The battery is recharged when the USB cable is plugged in. In this case, the power from the USB connection will power the unit and the remaining available paower will be used to charge the battery. It will take aproximately 4 hours to fully recharge the battery. When the battery is charging, an orange LED is on. If the USB cable is connected and it provides power to the unit and the orange LED is off, it means that the battery is fully charged. The LED is mounted on the back of the board, close to the USB connector, so it is visible only by looking from the side at the unit. The unit has an ON/OFF button, which is used to turn the power on and off. Pressing the button will toggle the power. If the power is off and the button is pressed, the power will turn on, if the power is on and the button is pressed, the power will turn off. When the power is on, a green LED will be on to indicate that the power is off. The LED is mounted on the back of the board, close to the USB connector, so it is visible only by looking from the side at the unit. When the power is off and the battery is charged or the USB cable is connected, pressing the ON/OFF button will always turn on power. When the display is in the process of being updated, in order to prevent power being turned off in the middle of an update, the main processor will disable the ON/OFF button. If the button is pressed during a display update, nothing will happen, the power will stay on. In order to turn the power off the ON/OFF button will have to be pressed again when there is no current display update there is no memory of the button being pressed during the dispay update . The demo unit has a battery voltage detection, that will automatically shut down the power when the battery voltage gets below 3.4V. EPSON S5U13522C100S00 E Paper Display PICtail Plus Board Jane board description Chapter 2 Jane-TCON EPD Demo Unit Overview The main processor is an Epson 16-bit MCU, S1C17801, which has an embedded USB controller, full-speed 12Mbps . The USB connector on the board is a Micro-B receptacle and it will require a USB cable with Micro-B plug. The board has a microSD card which is used by the main processor as permanent storage. All the demo files, including the images are stored on the microSD card. When connected to a computer by USB, the unit will be seen as a flash memory drive, and all the files on the microSD card will be accessible from the computer. The files can edited, deleted, new files can be added, the same as on any flash memory drive. The board has an Epson EPD controller, S1D13T03. The EPD controller will drive a PDI EPD display.

PDF Datasheet Preview

Jane-TCON EPD Demo Unit User Manual

SEIKO EPSON CORPORATION

Evaluation board/kit and Development tool important notice

This evaluation board/kit or development tool is designed to be used for engineering evaluation, demonstration, or development purposes only. Do not use it for any other purpose. It is not intended to meet the requirement of design for finished product.

This evaluation board/kit or development tool is intended for use by an electronics engineer, and it is not the product for consumer. The user should use this goods properly and safely. Seiko Epson does not assume any responsibility and liability of any kind of damage and/or fire caused by the use of it. The user should cease to use it when any abnormal issue occurs, even during proper and safe use.

The part used for this evaluation board/kit or development tool is subject to change without notice.

NOTICE

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency.

All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.

SEIKO EPSON CORPORATION 2012, All rights reserved

Table of Contents

Chapter 1 Introduction 5 Chapter 2 Features 7 Chapter 3 Setup and Configuration 8

Connecting the S5U13522C100S00 Evaluation Board 8 SW1 Host Interface Selection 8 SW2 SPI Channel Selection for Resources 9 Chapter 4 Use Case Programming Examples 10 Use Case Initialization 10 Use Case Display an Image 11 Use Case Displaying Text 12 Use Case Entering Sleep/Suspend Mode and Waking Up 13 Use Case Updating the Display 14 Use Case Using Layers 23 Chapter 5 References 26

S5U13522C100S00 E Paper Display PICtail Plus Board

EPSON

EPSON

S5U13522C100S00 E Paper Display PICtail Plus Board

Chapter 1 Introduction

Chapter 1 Introduction

This manual describes the setup and operation of the Jane-TCON EPD Demo Unit.

The Jane_TCON EPD Demo is a self contained demo unit intended for evaluation and demonstration of Pervasive Displays PDI EPD panels and Epson timing controller chips for these panels.

The unit is made of
• Jane board
• PDI EPD panel
• Plastic enclosure

The unit is powered by an internal Li-Ion rechargeable battery or from a USB connection. The battery is charged by power from the USB connection. The unit has an Epson TCON, S1D13T03, and typically has mounted a panel from PDI. The board can also use a or 2” EPD panel from PDI. The main processor on the board is an Epson MCU, S1C17801, which has embedded an USB controller. The demos software, including the images are stored on a microSD card.

Figure 1-1 Jane-TCON EPD Demo Unit Top View

S5U13522C100S00 E Paper Display PICtail Plus Board

EPSON

Chapter 2 Jane-TCON EPD Demo Unit Overview

Chapter 2 Jane-TCON EPD Demo Unit Overview

Power

The demo unit has a Li-Ion rechargeable battery, coin cell, LIR2450, 3.6V, 100mAh. When fully charged it will provide power for aproximately 1000 updates of the display. The battery is recharged when the USB cable is plugged in. In this case, the power from the USB connection will power the unit and the remaining available paower will be used to charge the battery. It will take aproximately 4 hours to fully recharge the battery. When the battery is charging, an orange LED is on. If the USB cable is connected and it provides power to the unit and the orange LED is off, it means that the battery is fully charged. The LED is mounted on the back of the board, close to the USB connector, so it is visible only by looking from the side at the unit.

The unit has an ON/OFF button, which is used to turn the power on and off. Pressing the button will toggle the power. If the power is off and the button is pressed, the power will turn on, if the power is on and the button is pressed, the power will turn off. When the power is on, a green LED will be on to indicate that the power is off. The LED is mounted on the back of the board, close to the USB connector, so it is visible only by looking from the side at the unit.

When the power is off and the battery is charged or the USB cable is connected, pressing the ON/OFF button will always turn on power.

When the display is in the process of being updated, in order to prevent power being turned off in the middle of an update, the main processor will disable the ON/OFF button. If the button is pressed during a display update, nothing will happen, the power will stay on. In order to turn the power off the ON/OFF button will have to be pressed again when there is no current display update there is no memory of the button being pressed during the dispay update .

The demo unit has a battery voltage detection, that will automatically shut down the power when the battery voltage gets below 3.4V.

EPSON

S5U13522C100S00 E Paper Display PICtail Plus Board

Jane board description

Chapter 2 Jane-TCON EPD Demo Unit Overview

The main processor is an Epson 16-bit MCU, S1C17801, which has an embedded USB controller, full-speed 12Mbps . The USB connector on the board is a Micro-B receptacle and it will require a USB cable with Micro-B plug.

The board has a microSD card which is used by the main processor as permanent storage. All the demo files, including the images are stored on the microSD card. When connected to a computer by USB, the unit will be seen as a flash memory drive, and all the files on the microSD card will be accessible from the computer. The files can edited, deleted, new files can be added, the same as on any flash memory drive.

The board has an Epson EPD controller, S1D13T03. The EPD controller will drive a PDI EPD display.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived S5U13T03D00C000 Datasheet file may be downloaded here without warranties.

Datasheet ID: S5U13T03D00C000 511854