B85321A2363G300 Feedthrough Filter July 2007
Part | Datasheet |
---|---|
![]() |
B85321A2363G300 (pdf) |
PDF Datasheet Preview |
---|
EMC filters 1-line filter Feedthrough Filter in Solderless Technology Series/Type Date: B85321A2363G300 Feedthrough Filter July 2007 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to “white” or invisible . This ensures that the table disappears for the customer PDF. To update the data sheet, click on the symbol “Preview” and then “Close”. Please do not alter the header or footer when copying the content. Identification/Classification 1 header 1 + top left header bar 1-line filter Identification/Classification 2 header 2 + bottom left header bar Feedthrough Filter Ordering code top right header bar B85321A2363G300 Series/Type top right header bar Ø 20 , 30A Preliminary data optional if necessary Department: IN FI PD Date: 2007-07-12 EPCOS AG Reproduction, publication and dissemination of this document, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. IN FI PD Please read Cautions and warnings and Important notes at the end of this document. Page 1 of 6 2007-07-12 1-line filter Feedthrough Filter B85321A2363G300 Ø 20 , 30A Feedthrough Filter Metallized selfhealing film capacitor. High insertion losses up to the GHZ range. Rated voltage 250 V AC 50/60Hz , 600 V DC Rated current 30 A Construction 1-line filters, Building-block system Metal case with synthetic resin terminals UL 94 V-0 MKP/MKT technology dry, self-healing , Dielectric polypropylene/polyester metallised For central screw fixing Features Excellent price/performance ratio Ultra-compact design High attenuation Easy to install High contact reliability through central screw fixing RoHS conform Applications Shielded rooms Power supplies Telephone exchanges, base stations Electrical machines and systems Terminals Threaded studs / axial leads EPCOS internal code for production location not marked on component Production Szombathely, Hungary V1 Production Hongqi, China Z99 Marking on component Manufacturer’s logo, ordering code, rated voltage, rated current, test voltage, climatic category, date code MM.YY , rated capacitance IN FI PD Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 6 2007-07-12 1-line filter Feedthrough Filter Typical circuit diagram: B85321A2363G300 Ø 20 , 30A Technical data and measuring conditions Rated capacitance Rated voltage VR Rated current IR Test voltage Vtest Climatic category IEC 60068-1 Approx. weight Terminals Fixing Approvals comply with 2 x 0,018 µF, ± 20% , 250 V AC, 50/60 Hz, 600 V DC 30 A, Referred to 40 °C ambient temperature 2700 V DC, 2s , lines/case 40/085/56 -40 °C/+85 °C/ 56 days damp heat test 65g M 5 / Ø 2,36 Type M 12x0,75 EN 132400 / EN133200 Characteristics and ordering codes Utest Approx. Ordering code weight Approvals VAC VDC/2s kg 30 250 2700 B85321A2363G300 X = approval granted IN FI PD Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 6 2007-07-12 1-line filter Feedthrough Filter Dimensional drawings B85321A2363G300 B85321A2363G300 Ø 20 , 30A MATERIAL Metal case, nickel plated. UL-listed material for resin and plastic insulting bush. Terminals, nuts and washers are nickel- or tin plated. Mounting instructions In case of using a screw fixing type the connecting line must be attached by fixing it between two countered nuts in order to avoid exposing the component to torque loads use two spanners Insertion loss typical values at Z = 50 10 100 1 10 100 1 KHz MHz GHz 10 62 >100 >100 IN FI PD Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 6 2007-07-12 1-line filter Feedthrough Filter B85321A2363G300 Ø 20 , 30A Cautions and warnings Please note the advices in our data book “EMC filters” latest edition attention should be paid to the chapters “Important notes” and “General safety notes”. It should be ensured that only qualified persons electricity specialists are engaged on work such as planning, assembly, installation, operation, repair and maintenance. They must be provided with the corresponding documentation. Danger of electric shock. EMC filters contain components that store an electric charge. Dangerous voltages can continue to exist at the filter terminals for longer than five minutes even after the power has been switched off. The protective earth connections should be the first to be made when the EMC filter is installed and the last to be disconnected. Depending on the magnitude of the leakage currents, the particular specifications for making the protective-earth connection must be observed. Impermissible overloading of the EMC filter, such as with circuits able to cause resonances, impermissible voltages at higher frequencies etc. can lead to destruction of the filter housing. EMC filters must be protected in the application against impermissible exceeding of the rated currents by overcurrent protective. In case of leakage currents > mA you shell mount the PE conductor stationary with the required cross section before beginning of operation and save it against disconnecting. For leakage currents IL < 10 mA the PE conductor must have a KU value of for leakage currents IL > 10 mA the PE conductor must have a KU value of 1 1 The KU value symbol KU is a classification parameter of safety-referred failure types designed to ensure protection against hazardous body currents and exessive heating. KU = 6 with respect to interruptions is achieved for fixed-connection lines 10 mm2 where the type of connection and line layout corresponds to the requirements for PEN conductors as specified in relevant standards. A value of KU = with respect to interruptions is attained - With a permanently connected protective earth circuit mm2 - With a protective earth circuit mm2 connected via shroud connectors IEC IN FI PD 2007-07-12 Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 6 1-line filter Feedthrough Filter |
More datasheets: DS-862GF-U5A1E | DS-862GF-U2A1E | DS-862GB-U2A1E | CL-426F-AA-SD-TS | CL-426F-AACC-SD-TS | CY62128VLL-70ZC | EAHP5630WA0 | A3948SLB | A3948SLBTR | A3948SB |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B85321A2363G300 Datasheet file may be downloaded here without warranties.