B72214Q0681K101

B72214Q0681K101 Datasheet


Disc type Ordering code B72214Q0681K101

Part Datasheet
B72214Q0681K101 B72214Q0681K101 B72214Q0681K101 (pdf)
PDF Datasheet Preview
Metal Oxide Varistor SIOV-Q14K680 Data sheet

Form FBLE3K/b File name Q14K680_a

MODIFICATIONS New data sheet
Disc type Ordering code B72214Q0681K101

REMARKS:

Prepared by Hotwagner

ISSUE DATE

Release ISSUE
signed PE / Hotwagner signed:

PUBLISHER
signed QS / Zödl signed:

KH PE VAR

PAGE 0/6

Metal Oxide Varistor SIOV-Q14K680 Data sheet
Disc type Ordering code B72214Q0681K101

SIOV nomenclature
= EnergetiQä Series
= Rated disk diameter
= Tolerance of VV at 1mA ±10%
= Max. AC voltage

Figure Dimensions given in Millimeters mm
bmax = hmax = smax = e=
a= lmin = =
16,5 19,5 9,9 10,0±1,0 5,8±1,0 30,0 1,0± 0,05

Electrical data:

Maximum Ratings 85°C Max. operating AC voltage Max. operating DC voltage Surge current 8/20µs 1 time Energy absorption 2ms 1 time Average power dissipation

Characteristics 25°C :

Varistor voltage at 1mA Clamping voltage at 65A 8/20µs Typ. capacitance at 1 kHz

VRMS VDC Imax Wmax Pmax

VV VC,max C
= 680V = 895V = 6000A = 320J = 0,80W
= 1100V ± 10% = 1815V = 200pF

ISSUE DATE

PUBLISHER

KH PE VAR

PAGE 1/6

Metal Oxide Varistor SIOV-Q14K680 Data sheet

V/I Characteristic:
5000 4000 vV
2000
Disc type Ordering code B72214Q0681K101

VAR9720A
1000 800 600
100 80
10 -5
10 -4
10 -3
10 -2
10 -1

Derating:
10000
1000 100 10
x inf.
10 3 A 10 4 i

Q14K510 680
imax. tr
0,1 10
1000
t r [µs]
10000

ISSUE DATE

PUBLISHER

KH PE VAR

PAGE 2/6

Metal Oxide Varistor SIOV-Q14K680 Data sheet
Disc type Ordering code B72214Q0681K101

Reliability Data:

Characteristics Varistor E Voltage

L Clamping Voltage

Test Methods/Description

The voltage between two terminals with the specified measuring current applied is called Vv 1 mADC - 2 s .

The maximum voltage between two terminals with the specified standard impulse current 8/20µs illustrated below applied.

Peak

Leading Edge

Trailing Edge

Specifications To meet the specified value.

To meet the specified value.

TS Rise Time µs Tr Decay time to half value µs O1 Nominal start Im Peak value

C Surge current derating, 8/20 µs

L Surge current derating, 2 ms
100 surge currents 8/20 µs , unipolar, interval 30 s, amplitude corresponding to derating curve for 20 µs
100 surge currents 2ms , unipolar, interval 120s, amplitude corresponding to derating curve for 2ms
| V/V 1 mA | 10 % measured in direction of surge current No visible damage
| V/V 1 mA | 10 % measured in direction of surge current No visible damage

ISSUE DATE

PUBLISHER

KH PE VAR

PAGE 3/6

Metal Oxide Varistor SIOV-Q14K680 Data sheet
Disc type Ordering code B72214Q0681K101

Characteristics Tensile strength

M E Vibration C H A Solderability N I C A L

Test Methods/Description

Specifications

After gradually applying the force specified below and keeping the unit fixed for 10 seconds, the terminal shall be visually examined for any damage.
| V/V 1 mA | No break of solder joint, no wire break

Terminal diameter mm

Force 5N
10 N 10 N 20 N

After repeatedly applying a single harmonic vibration according to the table below. Thereafter, the unit shall be visually examined.
| V/V 1 mA | No visible damage
frequency range amplitude duration pulse:
10 55 Hz mm or 98 6 h 3 x 2 h sine wave

After dipping the terminals to a depth of approximately 3 mm from the body in a soldering bath of 235°C for 5 seconds, the terminals shall be visually examined.

The inspection shall be carried out under adequate light with normal eyesight or with the assistance of a magnifier capable of giving a magnification of 4 times to 10 times. The dipped surface shall be covered with a smooth and bright solder coating with no more than small amounts of scattered imperfections such as pinholes or unwetted or de-wetted areas. These imperfections shall not be concentrated in one area.

ISSUE DATE

PUBLISHER

KH PE VAR

PAGE 4/6

Metal Oxide Varistor SIOV-Q14K680 Data sheet
Disc type Ordering code B72214Q0681K101

Characteristics

M Resistance to E soldering heat C H A

N Electric strength I C A L

Test Methods/Description

Specifications

Each lead shall be dipped into a solder bath having a temperature of 260 ± 5°C to a point to mm from the body of the unit, be held there for 10 ± 1 s and then be stored at room temperature and normal humidity for 1 to 2 hours. The change of Vv and mechanical damages shall be examined.
2500 VRMS, 10 s The varistor is placed in a container holding ± mm diameter metal balls such that only the terminations of the varistor are protruding. The specified voltage shall be applied between both terminals of the specimen connected together and the electrode inserted between the metal balls.
| V/V 1 mA | No visible damage

No breakdown

ISSUE DATE

PUBLISHER

KH PE VAR

PAGE 5/6

Metal Oxide Varistor SIOV-Q14K680 Data sheet
Disc type Ordering code B72214Q0681K101

Characteristics

E Max. AC operating voltage

V Damp heat, steady state

R Climatic sequence

Fast
temperature cycling

Test Methods/Description

Specifications

After being continuously applied the maximum allowable voltage at 85 ± 2°C for 1000 hours, the specimen shall be stored at room temperature and normal humidity for 1 to 2 hours. Thereafter, the change of Vv shall be measured.

The specimen shall be subjected to 40 ± 2°C, 90 to 95 % r.H. for 56 days without load and then stored at room temperature and normal humidity for 1 to 2 hours. Thereafter, the change of Vv shall be measured.

The specimen shall be subjected to a dry heat at +85°C, 16 h b damp heat, 1st cycle 55°C, 93 % r.H., 24 h c cold, -40°C, 2 h d damp heat, additional
5 cycles 55°C, 93 % r.H., 24 h/cycle Then the specimen shall be stored at room temperature and normal humidity for 1 to 2 hours. Thereafter, the change of Vv shall be measured.

The temperature cycle shown below shall be repeated 5 times. Then the specimen shall be stored at room temperature and normal humidity for 1 to 2 hours. The change of Vv and mechanical damage shall be examined.
| V/V 1 mA | 10 %
| V/V 1 mA | 10 %
| V/V 1 mA | 10 %
| V/V 1 mA | No visible damage

Step 1 2 3

Temperature °C -40 ± 3
transition time 85 ± 2

Period min. 30 ± 3 < 10 s 30 ± 3
Note More details can be found in the data book 'SIOV Metal Oxide Varistors', Ordering No. EPC 62002-7600

EPCOS AG Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI German Electrical and Electronic Manufacturers' Association , unless otherwise agreed.

ISSUE DATE

PUBLISHER

KH PE VAR

PAGE 6/6
More datasheets: SF3321-60011 | 50748603332500 | 50747603331500 | 26800B-370 | CS4270-CZZ | CS4270-DZZR | CS4270-CZZR | CS4270-DZZ | FQB9N50TM | FQI9N50TU


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B72214Q0681K101 Datasheet file may be downloaded here without warranties.

Datasheet ID: B72214Q0681K101 511647