B72207S1390K201

B72207S1390K201 Datasheet

B722* December 2011

Part	Datasheet
B72207S1390K201	B72207S1390K201 (pdf)

Related Parts	Information
B72210S1390K501	B72210S1390K501

PDF Datasheet Preview
SIOV metal oxide varistors Leaded varistors, Automotive 42 V series Series/Type Date: B722* December 2011 EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Leaded varistors Automotive series for 42 V B722* Construction Round varistor element, leaded Coating phenolic resin Automotive series for 42 V supply systems This series complies with the electrical requirements for the new 42 V board net as specified in draft standard ISO/TC22 WD42V-1E Stable protection level, minimum leakage current High resistance to cyclic temperature stress 1000 cycles High operating temperature up to 125 °C Delivery mode Bulk standard , taped versions on reel or in Ammo pack upon request. For further details refer chapter "Taping, packaging and lead configuration" for leaded varistors. General technical data Climatic category to IEC 60068-1 40/125/56 Operating temperature +125 Storage temperature +150 Response time Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 20 Leaded varistors Automotive series for 42 V B722* Electrical specifications and ordering codes Maximum ratings TA = 125 °C Ordering code 42-V supply systems Type untaped SIOV- V 1 RMS, op, max B72207S1390K201 B72210S1390K501 B72214S1390K501 B72220S1390K501 S07V42AUTOS2D1 48 S10V42AUTOS5D1 48 S14V42AUTOS5D1 48 S20V42AUTOS5D1 48 V 2 op, max max, dyn 1 Root-mean-square value of max. DC operating voltage incl. ripple 2 Peak value of max. DC operating voltage incl. ripple 3 Max. dynamic overvoltage as per ISO/TC22 WD24V-1E, tS 400 ms Pmax Characteristics TA = 25 °C Ordering code Type untaped SIOV- 42-V supply systems B72207S1390K201 B72210S1390K501 B72214S1390K501 B72220S1390K501 S07V42AUTOS2D1 S10V42AUTOS5D1 S14V42AUTOS5D1 S20V42AUTOS5D1 Vv 1 mA V 1 mA % ±10 ±10 ±10 ±10 vc,max ic V Ctyp 1 kHz Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 20 Leaded varistors Automotive series for 42 V Dimensional drawings B722* S07V42AUTOS2D1 S10, S14, S20V42AUTOS5D1 Dimensions Ordering code [e] ±1 a ±1 wmax mm B72207S1390K201 B72210S1390K501 B72214S1390K501 B72220S1390K501 Weight Nominal diameter mm 7 10 14 20 VRMS, op, max V 48 Weight g thmax mm hmax mm lmin mm Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 20 Leaded varistors Automotive series for 42 V B722* Reliability data Test Test methods/conditions Requirement Varistor voltage Clamping voltage The voltage between two terminals with To meet the specified value the specified measuring current applied is called VV 1 mADC 2 s . The maximum voltage between two To meet the specified value terminals with the specified standard impulse current 8/20 µs applied. Max. DC operating voltage MIL STD 202F, method 108A, UCT, VDC, 1000 h 1 mA \| No visible damage Fast temperature cycling IEC 60068-2-14, test Na, LCT/UCT, dwell time 15 min, 100 cycles for types and dwell time 15 min, 1000 cycles for 1 mA \| No visible damage types Damp heat IEC 60068-2-67, test Cy, 85 °C, 85% r. H., VDC, 1000 h 1 mA \| No visible damage Note UCT = Upper category temperature LCT = Lower category temperature Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 20 Leaded varistors Automotive series for 42 V B722* v/i characteristics v = f i for explanation of the characteristics refer to "General technical information", A = Leakage current, B = Protection level for worst-case varistor tolerances EPCOS ordering code system For leaded varistors B722 Monolithic varistor Nominal disc diameter Design S = Leaded varistor T = ThermoFuse F = Fail-safe varistor Q = EnergetiQ Series 0 = StandarD 1 = Automotive 2 = AdvanceD 3 = SuperioR 4 = SuperioR Max. AC operating voltage 271 = 27 101 = 275 VAC 140 = 14 100 = 14 VAC 141 = 14 101 = 140 VAC Tolerance of varistor voltage K = ±10% J = ±5% S = Special tolerance Lead configuration 1 = Straight leads 2 thru 5 = Kinked form Packaging 0 = Bulk, 1 thru 7 = Taping style Internal coding 1 = Standard Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 20 Leaded varistors Automotive series for 42 V B722* Taping and packaging of leaded varistors Tape packaging for lead spacing = 5 fully conforms to IEC 60286-2, while for lead spacings = and 10 the taping mode is based on this standard. Taping in accordance with IEC 60286-2 for lead spacing mm Taping based on IEC 60286-2 for lead spacing and 10 mm Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 20 Leaded varistors Automotive series for 42 V B722* Tape dimensions in mm = Tolerance = Tolerance = Tolerance Remarks P1 F 0 max. max. max. max. depends on s max. max. depends on s see tables in each series under "Dimensions" ±1 mm/20 sprocket holes measured at top of component body W1 W2 The crimp styles of the individual types can be seen from the type designation in the ordering tables. Crimp style mode Example B72210S0271K 5 01 \| Digit 13 Digit 13 of ordering code 1 2 3 4 5 Available upon request Internal coding Crimp style Standard, straight leads S2 S3 S4 S5 Figure 1 2 3 4 5 Standard leads and non-standard crimp styles Standard, straight leads Non-standard, crimp style S2 Non-standard, crimp style S3 Figure 1 Figure 2 Figure 3 Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 20 Leaded varistors Automotive series for 42 V Non-standard, crimp style S4 B722* Non-standard, crimp style S5 Figure 4 Figure 5 Component height hmax for crimped versions non-standard Due to technical reasons the component height hmax increases if a crimp is added. The maximum height of the crimped component can be found in the table below. Nominal diameter mm VRMS V 11 175 210 460 Crimp style mm hmax mm 11 175 210 460 11 300 320 460 S3/S5 S3/S5 Automotive Automotive D1 types S5 11 175 210 460 11 300 320 460 S3/S5 S3/S5 Automotive Automotive D1 types S5 11 320

PDF Datasheet Preview

SIOV metal oxide varistors

Leaded varistors, Automotive 42 V series

Series/Type Date:

B722* December 2011

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Leaded varistors Automotive series for 42 V

B722*

Construction Round varistor element, leaded Coating phenolic resin

Automotive series for 42 V supply systems This series complies with the electrical requirements for the new 42 V board net as specified in draft standard ISO/TC22 WD42V-1E Stable protection level, minimum leakage current High resistance to cyclic temperature stress 1000 cycles High operating temperature up to 125 °C

Delivery mode

Bulk standard , taped versions on reel or in Ammo pack upon request. For further details refer chapter "Taping, packaging and lead configuration" for leaded varistors.

General technical data

Climatic category
to IEC 60068-1
40/125/56

Operating temperature
+125

Storage temperature
+150

Response time

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 20

Leaded varistors Automotive series for 42 V

B722*
Electrical specifications and ordering codes Maximum ratings TA = 125 °C
Ordering code 42-V supply systems

Type untaped SIOV-

V 1 RMS, op, max

B72207S1390K201 B72210S1390K501 B72214S1390K501 B72220S1390K501

S07V42AUTOS2D1 48 S10V42AUTOS5D1 48 S14V42AUTOS5D1 48 S20V42AUTOS5D1 48

V 2 op, max
max, dyn
1 Root-mean-square value of max. DC operating voltage incl. ripple 2 Peak value of max. DC operating voltage incl. ripple 3 Max. dynamic overvoltage as per ISO/TC22 WD24V-1E, tS 400 ms

Pmax

Characteristics TA = 25 °C
Ordering code

Type untaped SIOV-
42-V supply systems

B72207S1390K201 B72210S1390K501 B72214S1390K501 B72220S1390K501

S07V42AUTOS2D1 S10V42AUTOS5D1 S14V42AUTOS5D1 S20V42AUTOS5D1

Vv 1 mA V
1 mA %
±10 ±10 ±10 ±10
vc,max ic V

Ctyp
1 kHz

Please read Cautions and warnings and Important notes at the end of this document.

Page 3 of 20

Leaded varistors Automotive series for 42 V

Dimensional drawings

B722*

S07V42AUTOS2D1

S10, S14, S20V42AUTOS5D1

Dimensions
Ordering code
[e] ±1 a ±1
wmax mm

B72207S1390K201

B72210S1390K501

B72214S1390K501

B72220S1390K501

Weight

Nominal diameter mm 7 10 14 20

VRMS, op, max V 48

Weight g
thmax mm
hmax mm
lmin mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 4 of 20

Leaded varistors Automotive series for 42 V

B722*

Reliability data

Test

Test methods/conditions

Requirement

Varistor voltage Clamping voltage

The voltage between two terminals with To meet the specified value the specified measuring current applied is called VV 1 mADC 2 s . The maximum voltage between two To meet the specified value terminals with the specified standard
impulse current 8/20 µs applied.

Max. DC operating voltage MIL STD 202F, method 108A, UCT, VDC, 1000 h
1 mA | No visible damage

Fast temperature cycling

IEC 60068-2-14, test Na, LCT/UCT, dwell time 15 min, 100 cycles for types and dwell time 15 min, 1000 cycles for
1 mA | No visible damage
types

Damp heat

IEC 60068-2-67, test Cy, 85 °C, 85% r. H., VDC, 1000 h
1 mA | No visible damage

Note UCT = Upper category temperature LCT = Lower category temperature

Please read Cautions and warnings and Important notes at the end of this document.

Page 5 of 20

Leaded varistors Automotive series for 42 V

B722*
v/i characteristics
v = f i for explanation of the characteristics refer to "General technical information", A = Leakage current, B = Protection level for worst-case varistor tolerances
EPCOS ordering code system

For leaded varistors

B722

Monolithic varistor

Nominal disc diameter

Design S = Leaded varistor T = ThermoFuse F = Fail-safe varistor Q = EnergetiQ

Series 0 = StandarD 1 = Automotive 2 = AdvanceD 3 = SuperioR 4 = SuperioR

Max. AC operating voltage 271 = 27 101 = 275 VAC 140 = 14 100 = 14 VAC 141 = 14 101 = 140 VAC

Tolerance of varistor voltage K = ±10% J = ±5% S = Special tolerance

Lead configuration 1 = Straight leads 2 thru 5 = Kinked form

Packaging 0 = Bulk, 1 thru 7 = Taping style

Internal coding 1 = Standard

Please read Cautions and warnings and Important notes at the end of this document.

Page 9 of 20

Leaded varistors Automotive series for 42 V

B722*

Taping and packaging of leaded varistors

Tape packaging for lead spacing = 5 fully conforms to IEC 60286-2, while for lead spacings = and 10 the taping mode is based on this standard.

Taping in accordance with IEC 60286-2 for lead spacing mm

Taping based on IEC 60286-2 for lead spacing and 10 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 10 of 20

Leaded varistors Automotive series for 42 V

B722*

Tape dimensions in mm
= Tolerance
= Tolerance
= Tolerance Remarks

P1 F 0
max.
max.
max.
max.
depends on s
max.
max.
depends on s
see tables in each series under "Dimensions"
±1 mm/20 sprocket holes
measured at top of component body

W1 W2
The crimp styles of the individual types can be seen from the type designation in the ordering tables.

Crimp style mode

Example B72210S0271K 5 01 |

Digit 13
Digit 13 of ordering code 1 2 3 4 5 Available upon request Internal coding

Crimp style Standard, straight leads S2 S3 S4 S5

Figure 1 2 3 4 5

Standard leads and non-standard crimp styles

Standard, straight leads

Non-standard, crimp style S2

Non-standard, crimp style S3

Figure 1

Figure 2

Figure 3

Please read Cautions and warnings and Important notes at the end of this document.

Page 14 of 20

Leaded varistors Automotive series for 42 V

Non-standard, crimp style S4

B722* Non-standard, crimp style S5

Figure 4

Figure 5

Component height hmax for crimped versions non-standard

Due to technical reasons the component height hmax increases if a crimp is added. The maximum height of the crimped component can be found in the table below.

Nominal diameter mm

VRMS V
11 175 210 460

Crimp style mm
hmax mm
11 175
210 460
11 300
320 460

S3/S5

S3/S5

Automotive

Automotive D1 types S5
11 175
210 460
11 300
320 460

S3/S5

S3/S5

Automotive

Automotive D1 types S5
11 320

More datasheets: FQPF44N10 | 65-21/GHC-YS2U1G/2T | A-USB-PM1 | AON7548_101 | FJN3307RTA | FJN3307RBU | FIT0330 | 242291 | SEN0161 | SEN0169

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B72207S1390K201 Datasheet file may be downloaded here without warranties.

Datasheet ID: B72207S1390K201 511634