B65811J0250A057

B65811J0250A057 Datasheet


B65811 B65811J250A057

Part Datasheet
B65811J0250A057 B65811J0250A057 B65811J0250A057 (pdf)
PDF Datasheet Preview
Ferrite core
Series/Type Ordering code:

Date Version:

B65811 B65811J250A057
2017-10-09 1

Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then
change the color to "white". This ensures that the table disappears invisible for the customer PDF.

Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it!

Identification/Classification 1
header 1 + top left bar :

Identification/Classification 2

Ferrite core
header 2 + bottom left header bar :
Ordering code top right header bar

B65811J250A057

Series/Type bottom right header bar

B65811

Preliminary data optional :

Department:

SMP MAG D

Date:
2017-10-09

Version:

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

RM8 Ferrite core

Magnetic characteristics per set without center hole
= mm-1
= 38 mm
= 64 mm2

Amin = 55 mm2

Ve = 2430 mm3

Approx. weight 12 g/set

Delivery mode In sets

B65811J250A057 B65811

Packing Blister tape

Material

AL value 1

Air gap symm mm
Ordering code -J without center hole
250 ±3%
app. 2x

B65811J250A057
1 Measurement Parameter 10 kHz, mT, 100 turns, room temperature

AL value is measured acc. to IEC62044-2. An appropriate wringing of cores with polished surface is used to improve reproducibility of the measurement It is recommended to rub the mating surfaces themselves six times in a circular or elliptic arc that matches the core profile before measuring AL .

SMP MAG D

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 5
2017-10-09

RM8 Ferrite core

B65811J250A057 B65811

Cautions and warnings

Mechanical stress and mounting Ferrite cores have to meet mechanical requirements during assembling and for a growing number of applications. Since ferrites are ceramic materials one has to be aware of the special behavior under mechanical load. As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast temperature changing or tensile load. Especially high cooling rates under ultrasonic cleaning and high static or cyclic loads can cause cracks or failure of the ferrite cores. For detailed information see data book, chapter “General - Definitions,

Effects of core combination on AL value Stresses in the core affect not only the mechanical but also the magnetic properties. It is apparent that the initial permeability is dependent on the stress state of the core. The higher the stresses are in the core, the lower is the value for the initial permeability. Thus the embedding medium should have the greatest possible elasticity. For detailed information see data book, chapter “General - Definitions,

Heating up Ferrites can run hot during operation at higher flux densities and higher frequencies.

NiZn-materials The magnetic properties of NiZn-materials can change irreversible in high magnetic fields.

Ferrite Accessories EPCOS ferrite accessories have been designed and evaluated only in combination with EPCOS ferrite cores. EPCOS explicitly points out that EPCOS ferrite accessories or EPCOS ferrite cores may not be compatible with those of other manufacturers. Any such combination requires prior testing by the customer and will be at the customer‘s own risk. EPCOS assumes no warranty or reliability for the combination of EPCOS ferrite accessories with cores and other accessories from any other manufacturer.

Processing remarks The start of the winding process should be soft. Else the flanges may be destroyed.

Too strong winding forces may blast the flanges or squeeze the tube that the cores can not be mounted any more.

Too long soldering time at high temperature >300 °C may effect coplanarity or pin arrangement. Not following the processing notes for soldering of the J-leg terminals may cause solderability
problems at the transformer because of pollution with Sn oxyde of the tin bath or burned insulation of the wire. For detailed information see chapter “Processing notes”, section The dimensions of the hole arrangement have fixed values and should be understood as a recommendation for drilling the printed circuit board. For dimensioning the pins, the group of holes can only be seen under certain conditions, as they fit into the given hole arrangement. To avoid problems when mounting the transformer, the manufacturing tolerances for positioning the customers’ drilling process must be considered by increasing the hole diameter.

SMP MAG D

Please read Cautions and warnings and Important notes at the end of this document.

Page 3 of 5
2017-10-09

RM8 Ferrite core

B65811J250A057 B65811
Display of ordering codes for EPCOS products
The ordering code for one and the same EPCOS product can be represented differently in data sheets, data books, other publications, on the EPCOS website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under

SMP MAG D

Please read Cautions and warnings and Important notes at the end of this document.

Page 4 of 5
2017-10-09

Important notes

The following applies to all products named in this publication Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or life-saving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association ZVEI . The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at

Page 5 of 5
More datasheets: DM74LS04M | DM74LS04N | CT-26-6A | CT-23-6A | IPM24S0C0R03FA | FDR858P | 2308 | FIN1531MTCX | FIN1531M | FIN1531MTC


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B65811J0250A057 Datasheet file may be downloaded here without warranties.

Datasheet ID: B65811J0250A057 511600