B57540G1303F000

B57540G1303F000 Datasheet

B57540G, B57540G1

Part	Datasheet
B57540G1303F000	B57540G1303F000 (pdf)

PDF Datasheet Preview
NTC thermistors for temperature measurement Glass-encapsulated sensors, standard type Series/Type: B57540G, B57540G1 DTahte:following produFctesbprureasryen2t0e0d9in this data sheet are being withdrawn. Ordering Code B57540G0145* B57540G0234* Substitute Product B57540G1104* B57540G1104* Date of Withdrawal 2012-03-23 2012-03-23 Deadline Last Orders 2012-06-28 2012-06-28 Last Shipments 2012-09-28 2012-09-28 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Temperature measurement Glass-encapsulated sensors B57540G, B57540G1 G540/G1540 Applications Temperature measurement Features Glass-encapsulated, heat-resistive and highly stable For temperature measurement up to 250 °C Very short response time Small dimensions Leads dumet wires copper-clad FeNi Options Leads nickel-plated dumet wires Alternative dimensions available on request Delivery mode Bulk General technical data Climatic category Max. power Resistance tolerance Rated temperature Dissipation factor Thermal cooling time constant Heat capacity IEC 60068-1 at 25 °C in air in air Dimensional drawing Dimensions in mm P25 TR Cth 55/250/56 18 ±1, ±2, ±3 25 approx. approx. 3 approx. mW % °C mW/K s mJ/K Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 18 Temperature measurement Glass-encapsulated sensors B57540G, B57540G1 G540/G1540 Electrical specification and ordering codes 5k 10 k 10 k 10 k 10 k 20 k 20 k 30 k 30 k 50 k 50 k 100 k 100 k 230 k 230 k 1400 k 1400 k No. of R/T B25/85 characteristic K 8402 7003 8307 8415 7002 8403 8304 8405 8406 3480 3612 3478 3992 3973 3992 4072 4240 4557 B0/100 3450 ±1% 3450 ±1% 3586 3450 3970 ±1% 3970 ±1% 3944 3970 ±1% 3970 ±1% 4036 4537 ±2%1 4537 ±2%1 5133 ±2%2 5133 ±2%2 + = Resistance tolerance F = ±1% G = ±2% H = ±3% The last three digits of the ordering code denote 000 and 005 = dumet wires 002 and 007 = nickel-plated wires B25/100 K 3497 3625 ±1% 3625 ±1% 3492 ±1% 3492 ±1% 4006 3988 ±1% 3988 ±1% 4006 4092 ±1% 4092 ±1% 4264 4581 Ordering code B57540G0502+000 B57540G0502+002 B57540G1103+005 B57540G1103+007 B57540G1103+000 B57540G1103+002 B57540G0203+000 B57540G0203+002 B57540G1303+005 B57540G1303+007 B57540G0503+000 B57540G0503+002 B57540G1104+000 B57540G1104+002 B57540G0234+000 B57540G0234+002 B57540G0145+000 B57540G0145+002 1 B100/200 2 B200/300 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 18 Temperature measurement Glass-encapsulated sensors B57540G, B57540G1 G540/G1540 Reliability data Test Storage in dry heat Storage in damp heat, steady state Rapid temperature cycling Standard Test conditions IEC 60068-2-2 IEC 60068-2-67 IEC 60068-2-14 Storage at upper category temperature T 250 °C t 1000 h Temperature of air 85 °C Relative humidity of air 85% Duration 56 days Lower test temperature °C Upper test temperature 200 °C Number of cycles 1000 typical < 3% Remarks No visible damage No visible damage No visible damage Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 18 Temperature measurement Glass-encapsulated sensors B57540G, B57540G1 G540/G1540 R/T characteristics R/T No. T °C 7002 7003 8304 B25/100 = 3988 K B25/100 = 3625 K B25/100 = 4092 K RT/R25 α %/K RT/R25 α %/K RT/R25 α %/K To be replaced by a number in ordering Platzhalter für Zahl im Bestellnummern- codes, type designations etc. code oder für die Typenbezeichnung. To be replaced by a letter. Platzhalter für einen Buchstaben. All dimensions are given in mm. Alle Maße sind in mm angegeben. The commas used in numerical values Verwendete Kommas in Zahlenwerten denote decimal points. bezeichnen Dezimalpunkte. Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 18 Important notes The following applies to all products named in this publication: Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or lifesaving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association ZVEI . The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at Page 18 of 18

PDF Datasheet Preview

NTC thermistors for temperature measurement

Glass-encapsulated sensors, standard type

Series/Type:

B57540G, B57540G1

DTahte:following produFctesbprureasryen2t0e0d9in this data sheet are being withdrawn.
Ordering Code

B57540G0145* B57540G0234*

Substitute Product

B57540G1104* B57540G1104*

Date of Withdrawal 2012-03-23 2012-03-23

Deadline Last Orders 2012-06-28 2012-06-28

Last Shipments
2012-09-28 2012-09-28

For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Temperature measurement Glass-encapsulated sensors

B57540G, B57540G1 G540/G1540

Applications Temperature measurement

Features Glass-encapsulated, heat-resistive and highly stable For temperature measurement up to 250 °C Very short response time Small dimensions Leads dumet wires copper-clad FeNi

Options Leads nickel-plated dumet wires Alternative dimensions available on request

Delivery mode Bulk

General technical data

Climatic category Max. power Resistance tolerance Rated temperature Dissipation factor Thermal cooling time constant Heat capacity

IEC 60068-1 at 25 °C
in air in air

Dimensional drawing

Dimensions in mm

P25 TR Cth
55/250/56 18 ±1, ±2, ±3 25 approx. approx. 3 approx.
mW % °C mW/K s mJ/K

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 18

Temperature measurement Glass-encapsulated sensors

B57540G, B57540G1 G540/G1540
Electrical specification and ordering codes
5k 10 k 10 k 10 k 10 k 20 k 20 k 30 k 30 k 50 k 50 k 100 k 100 k 230 k 230 k 1400 k 1400 k

No. of R/T B25/85 characteristic K
8402 7003 8307 8415 7002 8403 8304 8405 8406
3480 3612 3478 3992 3973 3992 4072 4240 4557

B0/100
3450 ±1% 3450 ±1% 3586 3450 3970 ±1% 3970 ±1% 3944 3970 ±1% 3970 ±1% 4036 4537 ±2%1 4537 ±2%1 5133 ±2%2 5133 ±2%2
+ = Resistance tolerance

F = ±1% G = ±2% H = ±3%
The last three digits of the ordering code denote 000 and 005 = dumet wires 002 and 007 = nickel-plated wires

B25/100 K
3497 3625 ±1% 3625 ±1% 3492 ±1% 3492 ±1% 4006 3988 ±1% 3988 ±1% 4006 4092 ±1% 4092 ±1% 4264 4581
Ordering code

B57540G0502+000 B57540G0502+002 B57540G1103+005 B57540G1103+007 B57540G1103+000 B57540G1103+002 B57540G0203+000 B57540G0203+002 B57540G1303+005 B57540G1303+007 B57540G0503+000 B57540G0503+002 B57540G1104+000 B57540G1104+002 B57540G0234+000 B57540G0234+002 B57540G0145+000 B57540G0145+002
1 B100/200 2 B200/300

Please read Cautions and warnings and Important notes at the end of this document.

Page 3 of 18

Temperature measurement Glass-encapsulated sensors

B57540G, B57540G1 G540/G1540

Reliability data

Test

Storage in dry heat

Storage in damp heat, steady state

Rapid temperature cycling

Standard Test conditions

IEC 60068-2-2

IEC 60068-2-67

IEC 60068-2-14

Storage at upper category temperature T 250 °C t 1000 h

Temperature of air 85 °C Relative humidity of air 85% Duration 56 days

Lower test temperature °C Upper test temperature 200 °C Number of cycles 1000
typical < 3%

Remarks

No visible damage

No visible damage

No visible damage

Please read Cautions and warnings and Important notes at the end of this document.

Page 4 of 18

Temperature measurement Glass-encapsulated sensors

B57540G, B57540G1 G540/G1540

R/T characteristics

R/T No.

T °C
7002
7003
8304

B25/100 = 3988 K

B25/100 = 3625 K

B25/100 = 4092 K

RT/R25
α %/K RT/R25
α %/K RT/R25
α %/K
To be replaced by a number in ordering Platzhalter für Zahl im Bestellnummern-
codes, type designations etc.
code oder für die Typenbezeichnung.

To be replaced by a letter.

Platzhalter für einen Buchstaben.

All dimensions are given in mm.

Alle Maße sind in mm angegeben.

The commas used in numerical values Verwendete Kommas in Zahlenwerten
denote decimal points.
bezeichnen Dezimalpunkte.

Please read Cautions and warnings and Important notes at the end of this document.

Page 17 of 18

Important notes

The following applies to all products named in this publication:

Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.

We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or lifesaving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component.

The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association ZVEI . The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at

Page 18 of 18

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B57540G1303F000 Datasheet file may be downloaded here without warranties.

Datasheet ID: B57540G1303F000 511507