EA-EDU-001

EA-EDU-001 Datasheet


Volume discount available for 25 boards, or more, see web shop Art.no EA-EDU-001 Buy

Part Datasheet
EA-EDU-001 EA-EDU-001 EA-EDU-001 (pdf)
PDF Datasheet Preview
Embedded Artists > Products > Education > LPC2148 Education Board

About Us

Products

Services

Support

Projects

Web Shop

Products
› Board Comparison Chart » Developer's Kits
» OEM Boards
» QuickStart Boards

Education Boards › LPC2103 Edu board › LPC2138 Edu board › LPC2148 v3 Edu board › Experiment board › LPC2148 v2 Edu board › Expansion - Ethernet › Expansion - Prototype › Expansion - MP3 › Expansion - UART » LPCXpresso & mbed
» Displays
» Tools
» Accessories

LPC2148 Education Board

Price Information

Volume discount available for 25 boards, or more, see web shop Art.no EA-EDU-001 Buy

Experiment Board An Experiment expansion board is available, see Related Products tab.

Embedded Artists' LPC2148 Education Board is the perfect board if you want to start learning about ARM7 microcontrollers. The board contains many interesting and useful experiments.

Overview Specification MCU Related Products Resources FAQ

LPC2148 Education Board

Processor

NXP's ARM7TDMI LPC2148 microcontroller

Program Flash Data Memory Clock Crystals On-board Peripherals

Dimensions Power Connectors

Other
512 KB
32+8 KB
• MHz crystal for maximum execution speed 5x PLL = 60 MHz CPU clock
• 32 KHz RTC crystal
• 2x16 character LCD with background light
• Joystick switch
• UART-to-serial bridge interface on UART #0
• XBee module interface module not included
• USB device interface on LPC2148
• RGB-LED, each color can be controlled via PWM signal
• 8 LEDs
• Pushbutton on P0.14
• 8x8 LED matrix, controlled via shift registers in the SPI bus
• Speaker on analog output P0.25
• MMC/SD memory card interface
• Step motor control
• Temperature sensor LM75
• 2 Analog inputs
• Low-pass filtering of PWM signal
• 1 Analog output
• Reset button
156 x 110 mm

On-board low-dropout voltage and reset generation
• Generates +3.3V and +5V supply if external 9-15VDC power supply
• +3.3V available for external circuits, up to 300 mA
• Power supply 9-15 VDC, from mm power connector, or directly from USB connectors.
• mini-B USB, USB-to-serial bridge interface
• mini-B USB, LPC2148 device interface
• MMC/SD memory card connector
• JTAG
• 50 pin expansion connector
• mm power supply connector
• 2 Kbit I2C E2PROM for storing non-volatile parameters
• Simple and automatic program download ISP via USB-serial channel. Circuit that
6/29/2011

Embedded Artists > Products > Education > LPC2148 Education Board
automatically controls the bootloader from USB-serial channel
• Four layer PCB FR-4 material for best noise immunity
• Delivered with 50 pos flat cable for explansion connector

Expansion Connector

The 50 pos expansion connector can be used for own experiments. The following signals are available on the expansion connector
• P0.0 - P0.23, P0.25, P0.28-P0.31
• P1.16 - P1.25
• Reset
• Vref
• Vbat
• Power VCC +3.3V , GND, and Vin +5V
More datasheets: FDS6673AZ | HMC643LC5 | FOD816300W | FOD816W | FOD816S | FOD8163S | FOD816 | FOD816300 | FOD816SD | FOD8163SD


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EA-EDU-001 Datasheet file may be downloaded here without warranties.

Datasheet ID: EA-EDU-001 511040