28133R-US

28133R-US Datasheet


Model 28133R-US IzoT CPM 4200 Wi-Fi EVB US Edition

Part Datasheet
28133R-US 28133R-US 28133R-US (pdf)
Related Parts Information
10080R-10-133U 10080R-10-133U 10080R-10-133U
PDF Datasheet Preview
CPM 4200 Wi-Fi EVK

A complete hardware and software platform for creating or evaluating wireless IoT devices based on the IzoT CPM 4200 Wi-Fi Module
• Provides tools that enable you to develop smart devices that communicate wirelessly using standard Wi-Fi communications and the LonTalk/IP control networking protocol
• Includes software development tools for the IzoT CPM 4200 Wi-Fi Module
• Enables development of C and C++ applications for the CPM 4200 module using
the popular open-source Eclipse integrated development environment IDE
• Includes two IzoT CPM 4200 Wi-Fi EVB evaluation boards with a Raspberry Pi
compatible I/O connector for rapid prototyping and testing of your wireless devices
• Includes the IzoT Commissioning Tool EVK Edition for easy installation of control networks with any combination of wired and wireless devices
• Includes an IzoT Router 2 with FT and Ethernet interfaces for easy integration of wired and wireless devices
• Includes a sample IzoT CPM 4200 Wi-Fi Module for initial prototyping of your custom hardware
• Includes plug-in for the free open source Wireshark network protocol analyzer that can be used to capture, analyze, characterize, and display network packets so you can pinpoint network or device faults and identify potential solutions

Build Wireless Devices for the Industrial IoT

The IzoT CPM 4200 Wi-Fi EVK is a hardware and software development kit for developing devices using IEEE 802.11b/g/n Wi-Fi wireless communications that can communicate with wired and wireless devices based on the IzoT Platform. With the IzoT CPM 4200 Wi-FI EVK, you can use the IzoT Platform to create highly reliable communities of devices for the Industrial Internet of Things using the CPM 4200 Wi-Fi Module, and develop your applications using the C or C++ programming languages. Your IzoT devices can collect physical data from sensors built to monitor things including temperature, humidity, light-level, power-consumption, air quality, or moisture, and make the data available to other IzoT devices within the community. Using data received from other IzoT devices and locally attached sensors, your IzoT devices can also control physical actuators such as LED dimmers, motor controllers, damper controllers, and solenoids. You can use the Wi-Fi CPM 4200 Wi-Fi EVK for the following:
• Create and edit C/C++ code and the IzoT Markup Language IML to implement your device’s functionality and network interface
• Compile, build, download and debug your application to one of the included Wi-Fi Evaluation Boards EVBs or to your own custom devices based on the CPM 4200 Wi-Fi Module
• Test with prototype I/O hardware with the included EVBs or use your own custom device to build and test your I/O hardware
• Install your device into a IP or LON network and test how your device interoperates with other LonTalk/ IP or LON devices on the same Wi-Fi channel, or on other LonTalk/IP or LON compatible channels such as Ethernet or Free Topology FT twisted pair.

A rich set of and IoT standard profiles and data types is included that you can use to reduce application development time.

Specifications

Development PC Requirements

Operating System
• Windows 10 64-bit and 32bit , Windows 64-bit and 32-bit , Microsoft Windows 8 64-bit and 32-bit , or Microsoft Windows 7 64-bit and 32-bit

Minimum Hardware
• 366MHz equivalent processor or higher, meeting the minimum requirements for the installed version of Windows
• 2 GB RAM

Available I/O Peripherals
• 4 32-bit general purpose timers with selectable clock source, programmable clock divider, and pre-scalar
• 2 universal asynchronous receiver transmitters UARTs supporting up to kbps with auto flow control support and programmable data format
• 2 I2C interfaces supporting up to 2 Mbps
• 1 quad serial peripheral interface QSPI supporting up to 200 Mbps synchronous serial communication
• 1 synchronous serial protocol SSP interface supporting SSP and SPI devices
• 2 analog to digital converters ADCs with selectable decimation rates providing effective resolutions from 10 to 16 bits
• 1 digital to analog converter DAC with 10-bit resolution and up to 500 kHz throughput
• 17 general purpose input/outputs GPIO that can be configured as general purpose inputs or outputs

CPM 4200 EVB Specifications

Processor
• Marvell 88MC200 32MHz ARM

Cortex-M3

Memory
• 1Mbyte flash on CPM 4200 module
• 1Mbyte flash on CPM 4200 EVB
• 512Kbyte SRAM

Radio
• Marvell 88W8801 Wi-Fi SoC
• IEEE 802.11bgn, channels 1 13
• band
• and OFDM modulation
• Up to 54Mbps transfer rate
• -82 dBm minimum sensitivity
Ordering Information

Model 10080R-10-133U IzoT CPM 4200 Wi-Fi EVK US Edition

Model 10080R-10-133 IzoT CPM 4200 WiFi EVK Global Edition

Model 28133R-US IzoT CPM 4200 Wi-Fi EVB US Edition

Model 28133R IzoT CPM 4200 Wi-Fi EVB Global Edition

Model 56550R IzoT CPM 4200 Wi-Fi Module
2015 Echelon, IzoT, LonWorks, and the Echelon logo are trademarks of Echelon Corporation registered in the United States and other countries. Content subject to change without notice.
More datasheets: B84299K00370000 | B84299K36 | B84299K35 | ADZS-BF527-MPSKIT | T89C51RD2-SMSIM | T89C51RD2-SLSIM | T89C51RD2-RDTIL | B88069X0820T502 | 250-084 | DFR0264


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 28133R-US Datasheet file may be downloaded here without warranties.

Datasheet ID: 28133R-US 510883