Solar Charger SKU:DFR0264
Part | Datasheet |
---|---|
![]() |
DFR0264 (pdf) |
PDF Datasheet Preview |
---|
Solar Charger SKU:DFR0264 Contents • 1 Introduction • 2 Specification • 3 Diagram • 4 FAQ • 5 Application Introduction Specification • Input Voltage 4.4~6V • Charging Current 500mA Max Depending on the solar battery supply capability • Charging Cutoff Voltage 4.2V • Operating Temperature:-40~85 • Module Size 33mm*33mm*12mm • Requisite battery 3.7V lithium battery Please note the maximum permissible charging current of the lithium battery • Charging Indicator Charging:Red LED Done:Green LED No Battery:Red LED Flashing Diagram Port Description • PWR IN:4.4~6V power input terminal. You should connect it to a solar battery. The maximum output voltage of the solar battery should be in the range of 4.4V to 6V. • BAT Connect a 3.7V lithium battery, for storing electricity. • VOUT Lithium-ion battery output. Connect your electrical equipment to it. • Charging Indicator When there are no battery, the green LED is ON and the red LED is flashing. When charging, only the red LED is ON. After the charging is completed, only the green LED is ON. Q. Can I charge my lipo with a battery, and charge an arduino at the same time? A. Not recommanded! For the Solar cannot produce a steady current generally. If you supply the not steady power to an Arduino card, it may cause unexpected result or get the bootloader lost. Application Material • Solar Panel 5v 260mA • [Solar Charger] • 3.7V Polymer Lithium Ion Battery - 1000mAh Powered By DFRobot 2008-2017 |
More datasheets: B84299K00390000 | B84299K00370000 | B84299K36 | B84299K35 | ADZS-BF527-MPSKIT | T89C51RD2-SMSIM | T89C51RD2-SLSIM | T89C51RD2-RDTIL | B88069X0820T502 | 250-084 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0264 Datasheet file may be downloaded here without warranties.