W2E142-BB05-01
Part | Datasheet |
---|---|
![]() |
W2E142-BB05-01 (pdf) |
PDF Datasheet Preview |
---|
W2E142-BB05-01 Operating instructions ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 0 7938/81-0 Fax +49 0 7938/81-110 CONTENTS SAFETY REGULATIONS AND NOTES Levels of hazard warnings Staff qualification Basic safety rules Electrical voltage Safety and protective functions Mechanical movement Emission Hot surface Transport Storage Disposal PROPER USE TECHNICAL DATA Graphic rendition of products Nominal data Technical description Mounting data Transport and storage conditions CONNECTION AND START-UP Connecting the mechanical system Connecting the electrical system Connection via plug Connection diagram Checking the connections Switch on device Switching off the device MAINTENANCE, MALFUNCTIONS, POSSIBLE CAUSES AND REMEDIES Cleaning Safety test SAFETY REGULATIONS AND NOTES Please read these operating instructions carefully before starting to work with the device. Observe the following warnings to prevent malfunctions or physical damage to both property and people. These operating instructions are to be regarded as part of this device. If the device is sold or transferred, the operating instructions must accompany it. These operating instructions may be duplicated and forwarded for information about potential dangers and their prevention. Levels of hazard warnings These operating instructions use the following hazard levels to indicate potentially hazardous situations and important safety regulations 1 DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Compliance with the measures is mandatory. WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Exercise extreme caution while working. CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or damage of property. NOTE A potentially harmful situation can occur and, if not avoided, can lead to property damage. 4 Staff qualification Only specialised electrical personnel may install the device, perform the test run and work on the electrical system. Only trained and authorised specialist personnel are permitted to transport, unpack, assemble, operate or maintain the device, or to use it in any other manner. 6 Basic safety rules Any safety hazards stemming from the device must be re-evaluated once it is installed in the end device. Observe the following when working on the unit: Do not make any modifications, additions or conversions to the device without the approval of ebm-papst. Electrical voltage Check the electrical equipment of the device at regular intervals. Remove loose connections and defective cables immediately. DANGER |
More datasheets: D221K20Y5PL63L6 | D103K69Y5PL63L0 | HDJD-JD02 | HDJD-S722-QR999 | CDBMTS280-HF | CDBMTS220-HF | CDBMTS250-HF | CDBMTS230-HF | 11-21SURC/S530-A3/TR8 | FDW2507NZ |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived W2E142-BB05-01 Datasheet file may be downloaded here without warranties.