RER190-45/182TDP

RER190-45/182TDP Datasheet

RER190DC Series Motorized Impeller

Part	Datasheet
RER190-45/182TDP	RER190-45/182TDP (pdf)

PDF Datasheet Preview
RER190DC Series Motorized Impeller 190 x 69mm - New S-Force Models 3-phase fan drive with high degree of smooth operation. High pressure build-up Backward-curved impeller Standard with PWM control input and speed signal, additional inputs and outputs on request. Fiberglass-reinforced plastic impeller Fully integrated electronic commutation Direction of rotation CW as seen on rotor Direction of air flow axial suction, radial air outlet Electrical connection via single leads AWG 20, TR 63, speed signal and control input AWG Stripped and tinned ends RER190-45/18/2TDP Curve CFM 0 VolRt.ange Pow Wer Input MaTxeAmmpbC. BeaTryipneg Spe RedPM Wg tl.bs 36 to 72 Ball Leads 4600 Speed control range from 800 rpm at 7% PWM up to rpm at > 90% PWM. Stationary at 0% PWM, maximum speed at interruption of control wire. Preliminary data, subject to alterations without notice. 2 mm R10 The air flow and noise level of fans without external housing depends on the installation Air flow conditions. The stated air flow and noise has been measured under the following conditions: Air flow Centrifugal fan mounted on a base plate 195 x 195 mm. Cover plate 195 x 195 mm with an air-inlet of mm, concentric to the blower wheel. Short term operation at room temperature allowable in the dotted area of the performance curve only. in H O 600 CFM V• 800 1000 M4 4x m ax. 8 deep e-mail • TEL 860-674-1515 • FAX 860-674-8536 ebm-papst Inc., 100 Hyde Road, Farmington, CT 06034 USA ebm-papst Inc., 2009 ebm-papst Inc. reserves the right to change any specifications or data without notice

PDF Datasheet Preview

RER190DC Series Motorized Impeller
190 x 69mm - New S-Force Models
3-phase fan drive with high degree of smooth operation. High pressure build-up Backward-curved impeller Standard with PWM control input and speed signal, additional inputs and outputs on request. Fiberglass-reinforced plastic impeller Fully integrated electronic commutation Direction of rotation CW as seen on rotor Direction of air flow axial suction, radial air outlet Electrical connection via single leads AWG 20, TR 63, speed signal and control input AWG Stripped and tinned ends

RER190-45/18/2TDP

Curve

CFM 0

VolRt.ange

Pow Wer Input

MaTxeAmmpbC.

BeaTryipneg

Spe RedPM

Wg tl.bs
36 to 72

Ball

Leads 4600

Speed control range from 800 rpm at 7% PWM up to rpm at > 90% PWM. Stationary at 0% PWM, maximum speed at interruption of control wire. Preliminary data, subject to alterations without notice.
2 mm R10

The air flow and noise level of fans without external housing depends on the installation

Air flow
conditions. The stated air flow and noise has been measured under the following
conditions:

Air flow

Centrifugal fan mounted on a base plate 195 x 195 mm.

Cover plate 195 x 195 mm with an air-inlet of mm, concentric to the blower wheel.

Short term operation at room temperature allowable in the dotted area of the performance curve only.
in H O
600 CFM

V•
800 1000

M4 4x
m ax. 8 deep
e-mail
• TEL 860-674-1515
• FAX 860-674-8536 ebm-papst Inc., 100 Hyde Road, Farmington, CT 06034 USA ebm-papst Inc., 2009 ebm-papst Inc. reserves the right to change any specifications or data without notice

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived RER190-45/182TDP Datasheet file may be downloaded here without warranties.

Datasheet ID: RER190-45/182TDP 510808