AT49LH004-33JX

AT49LH004-33JX Datasheet


AT49LH004

Part Datasheet
AT49LH004-33JX AT49LH004-33JX AT49LH004-33JX (pdf)
Related Parts Information
AT49LH004-33TC AT49LH004-33TC AT49LH004-33TC
AT49LH004-33JC AT49LH004-33JC AT49LH004-33JC
AT49LH004-33TC-T AT49LH004-33TC-T AT49LH004-33TC-T
AT49LH004-33JC-T AT49LH004-33JC-T AT49LH004-33JC-T
AT49LH004-33JX-T AT49LH004-33JX-T AT49LH004-33JX-T
PDF Datasheet Preview
• Auto-detection of FWH and LPC Memory Cycles Can Be Used as FWH for Intel 8xx, E7xxx, and E8xxx Series Chipsets Can Be Used as LPC Flash for Non-Intel Chipsets
• Flexible, Optimized Sectoring for BIOS Applications 32-Kbyte Top Boot Sector, Two 8-Kbyte Sectors, One 16-Kbyte Sector, Seven 64-Kbyte Sectors Or Memory Array Can Be Divided Into Eight Uniform 64-Kbyte Sectors for Erasing
• Two Configurable Interfaces FWH/LPC Interface for In-System Operation Address/Address Multiplexed A/A Mux Interface for Programming during Manufacturing
• FWH/LPC Interface Operates with the 33 MHz PCI Bus Clock 5-signal Communication Interface Supporting Byte Reads and Writes Two Hardware Write Protect Pins TBL for Top Boot Sector and WP for All Other Sectors Five General-purpose Input GPI Pins for System Design Flexibility Identification ID Pins for Multiple Device Selection Sector Locking Registers for Individual Sector Read and Write Protection
• A/A Mux Interface 11-pin Multiplexed Address and 8-pin Data Interface Facilitates Fast In-System or Out-of-System Programming
• Single Voltage Operation 3.0V to 3.6V Supply Voltage for Read and Write Operations
• Industry-Standard Package Options 32-lead PLCC 40-lead TSOP
• Green Pb/Halide-free Packaging Option
4-megabit Firmware Hub and Low-Pin Count Flash Memory

AT49LH004

Not Recommended for New Design

The AT49LH004 is a Flash memory device designed for use in PC and notebook BIOS applications. The device complies with version of Intel’s LPC Interface Specification, providing support for both FWH and LPC memory read and write cycles. The device can also automatically detect the memory cycle type to allow the AT49LH004 to be used as a FWH with Intel chipsets or as an LPC Flash with non-Intel chipsets.

The sectoring of the AT49LH004’s memory array has been optimized to meet the needs of today’s BIOS applications. By optimizing the size of the sectors, the BIOS code memory space can be used more efficiently. Because certain BIOS code modules must reside in their own sectors by themselves, the wasted and unused memory space that occurred with previous generation BIOS Flash memory devices can be greatly reduced. This increased memory space efficiency allows additional BIOS routines to be developed and added while still maintaining the same overall device density.

The memory array of the AT49LH004 can be sectored in two ways simply by using two different erase commands. Using one erase command allows the device to contain a total of 11 sectors comprised of a 32-Kbyte boot sector, two 8-Kbyte sectors, a 16-Kbyte sector, and seven 64-Kbyte sectors. The 32-Kbyte boot sector is located at the top uppermost of the device’s memory address space. Alternatively, by using a different erase command, the memory array can be arranged into eight even erase sectors of 64-Kbyte each.

The AT49LH004 supports two hardware interfaces The FWH/LPC interface for In-System operations and the A/A Mux interface for programming during manufacturing. The Interface Configuration IC pin of the device provides the control between these two interfaces. An internal Command User Interface CUI serves as the control center between the device interfaces and the internal operation of the nonvolatile memory. A valid command sequence written to the CUI initiates device automation.

Specifically designed for use in 3-volt systems, the AT49LH004 supports read, program, and erase operations with a supply voltage range of 3.0V to 3.6V. No separate voltage is required for programming and erasing.

The AT49LH004 utilizes fixed program and erase times, independent of the number of program and erase cycles that have occurred. Therefore, the system does not need to be calibrated or correlated to the cumulative number of program and erase cycles.

Pin Configurations
32-lead PLCC
40-lad TSOP
4 GPI2 [A8] 3 GPI3 [A9] 2 RST [RST] 1 NC 32 VCC 31 CLK [R/C] 30 GPI4 [A10]
[A7] GPI1 5 [A6] GPI0 6
[A5] WP 7 [A4] TBL 8 [A3] ID3 9 [A2] ID2 10 [A1] ID1 11 [A0] ID0 12 [I/O0] FWH0/LAD0 13
29 IC [IC] 28 GND 27 NC 26 NC 25 VCC 24 INIT [OE] 23 FWH4/LFRAME [WE] 22 RES [RDY/BSY] 21 RES [I/O7]

NC 1 [IC] IC 2

NC 3 NC 4 NC 5 NC 6 [A10] GPI4 7 NC 8 [R/C] CLK 9 VCC 10 NC 11 [RST] RST 12 NC 13 NC 14 [A9] GPI3 15 [A8] GPI2 16 [A7] GPI1 17 [A6] GPI0 18 [A5] WP 19 [A4] TBL 20
40 GND 39 VCC 38 FWH4/LFRAME [WE] 37 INIT [OE] 36 RES [RDY/BSY] 35 RES [I/O7] 34 RES [I/O6] 33 RES [I/O5] 32 RES [I/O4] 31 VCC 30 GND 29 GND 28 FWH3/LAD3 [I/O3] 27 FWH2/LAD2 [I/O2] 26 FWH1/LAD1 [I/O1] 25 FWH0/LAD0 [I/O0] 24 ID0 [A0] 23 ID1 [A1] 22 ID2 [A2] 21 ID3 [A3]
[I/O1] FWH1/LAD1 14 [I/O2] FWH2/LAD2 15

GND 16 [I/O3] FWH3/LAD3 17
[I/O4] RES 18 [I/O5] RES 19 [I/O6] RES 20

Note [ ] Designates A/A Mux Interface.
2 AT49LH004

Block Diagram

TBL WP INIT

CLK FWH4/LFRAME

FWH/LAD[3:0]

ID[3:0] GPI[4:0]

IC RST

R/C A[10:0] I/O[7:0]

OE WE

RDY/BSY
Ordering Information

Standard Package

ICC mA

Active

Standby
Ordering Code AT49LH004-33JC AT49LH004-33TC

Green Package Option Pb/Halide-free

ICC mA

Active

Standby
Ordering Code

AT49LH004-33JX AT49LH004-33TX

AT49LH004

Package 32J 40T

Operation Range Extended Commercial
0° to 85°C

Package 32J 40T

Operation Range Extended Commercial
0° to 85°C

Package Type
32-lead, Plastic J-leaded Chip Carrier Package PLCC
40-lead, Thin Small Outline Package TSOP

Packaging Information
32J PLCC

PIN NO. 1 IDENTIFIER
e D1 D

B1 E2

A2 A1 A
0.51 0.020 MAX 45 MAX 3X

COMMON DIMENSIONS Unit of Measure = mm

This package conforms to JEDEC reference MS-016, Variation AE. Dimensions D1 and E1 do not include mold protrusion.

Allowable protrusion is mm per side. Dimension D1 and E1 include mold mismatch and are measured at the extreme material condition at the upper or lower parting line. Lead coplanarity is mm maximum.

SYMBOL MIN NOM MAX NOTE

Note 2

Note 2
10/04/01

TITLE 2325 Orchard Parkway 32J, 32-lead, Plastic J-leaded Chip Carrier PLCC R San Jose, CA 95131
38 AT49LH004
40T TSOP

PIN 1

AT49LH004

Pin 1 Identifier

SEATING PLANE

GAGE PLANE

COMMON DIMENSIONS

Unit of Measure = mm

This package conforms to JEDEC reference MO-142, VariationDCD.

Dimensions D1 and E do not include mold protrusion. Allowable
protrusion on E is mm per side and on D1 is mm per side.

Lead coplanarity is mm maximum.

MIN NOM MAX
More datasheets: BC214LB_L34Z | Q48SK11049NRFA | ACS756KCA-050B-PFF-T | ACS756SCA-100B-PFF-T | ACS756SCA-050B-PFF-T | AT49LH004-33TC | AT49LH004-33JC | AT49LH004-33TC-T | AT49LH004-33JC-T | AT49LH004-33JX-T


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT49LH004-33JX Datasheet file may be downloaded here without warranties.

Datasheet ID: AT49LH004-33JX 518707