0402ESDB-MLP1

0402ESDB-MLP1 Datasheet


0402ESDA-MLP

Part Datasheet
0402ESDB-MLP1 0402ESDB-MLP1 0402ESDB-MLP1 (pdf)
Related Parts Information
0402ESDA-MLPT 0402ESDA-MLPT 0402ESDA-MLPT
PDF Datasheet Preview
Technical Data 4367

Effective February 2016 Supersedes September 2010
0402ESDA-MLP

ESD suppressor

HALOGEN

Pb HF FREE

Product description
• Ultra-low capacitance pF ideal for high
speed data applications
• Provides Electro Static Discharge ESD
protection with fast response time <1 ns allowing equipment to pass IEC 61000-4-2 Level 4 test
• Single-line, bi-directional device
• 0402 1005 metric compact design utilizes less board space
• Lead free, Halogen free and RoHS compliant

Applications
• ESD port protection for mobile/smart phones
• Game console ESD port protection
• High speed ESD data port protection
• Set-top-boxes
• Tablets, notebooks, netbooks, laptops
• High definition television HDTV
• Media players
• Digital cameras
• Medical equipment
• Computers and peripherals ESD port protection
• Consumer electronics
Ordering
• Specify part number and termination suffix
e.g. 0603ESDA-MLP1 0603ESDA-MLP=part number, 1=Termination suffix

Termination suffixes
• 1 Dip termination, Packaged Tape and reel,
10 000 parts per 7” diameter reel

Technical Data 4367

Effective February 2016

Product specifications

Part number4 0402ESDA-MLP

Rated voltage mVaDCx imum

Clamping voltage1 V typical

Trigger voltage2 V typical

Capacitance 1 MHz pF typical

Capacitance 1 MHz pF maximum

Attenuation change GHz dB typical
0402ESDA-MLP ESD

Leakage current 1ty2pVicDaC l nA

ESD capability IEC61000-42 Direct discharge kV typical

ESD capability IEC61000-42 Air discharge kV typical

ESD pulse withstand3 typical
>1000

Clamping voltage Per IEC61000-4-2, Level 4 waveform 8 kV direct 30 A measured 30 ns after initial pulse.

Trigger voltage Trigger measurement made using Transmission Line Pulse TLP method.

Minor shifting in characteristics may be observed over multiple ESD pulses at very rapid rate. Part Number Definition 0402ESDA-MLP
0402ESDA= Product code and size -MLP= Form designation
[in]

Design considerations

The location in the circuit for the 0402ESDA-MLP has to be carefully determined. For better performance, the device should be placed as close to the signal input as possible and ahead of any other component. Due to the high current associated with an ESD event, it is recommended to use a “0-stub” pad design pad directly on the signal/data line and second pad directly on common ground .
0402ESDA-MLP ESD

Environmental data

Operating temperature - 55 °C to +125 °C Storage temperature component - 55 °C to +125 °C Load humidity 12 VDC per EIA/IS- 722 +85 °C, 85% relative humidity for 1000 hours Thermal shock 10 cycles, - 55 °C to +125 °C, 30 minute dwell time Moisture resistance MIL-STD-202G, method 106G, 10 cycles Mechanical shock EIA/IS- 722 paragraph Mechanical vibration EIA/IS- 722 paragraph Resistance to solvent EIA/IS- 722 paragraph

Packaging information Supplied in tape-and-reel packaging, 10 000 parts per reel, 7” diameter reel.

Technical Data 4367

Effective February 2016

Technical Data 4367

Effective February 2016

Wave solder profile Reflow soldering not recommended

First Wave

Second Wave
0402ESDA-MLP ESD

Temperatur e

Tsmax Tstyp
More datasheets: FQPF50N06 | ATA6660-TAP | ATA6660-TAQ | ATA6660-TAQY 19 | ATA6660-TAPY 19 | ATA6660-TAQY | AK3220X-1.8 | EA8938 | ACT8938 | 0402ESDA-MLPT


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 0402ESDB-MLP1 Datasheet file may be downloaded here without warranties.

Datasheet ID: 0402ESDB-MLP1 506736