3130-F110-H7T1-W29AG3-10A

3130-F110-H7T1-W29AG3-10A Datasheet


Thermal Overcurrent Circuit Breaker 3130

Part Datasheet
3130-F110-H7T1-W29AG3-10A 3130-F110-H7T1-W29AG3-10A 3130-F110-H7T1-W29AG3-10A (pdf)
Related Parts Information
3130-F120-P7T1-W12QY7-7A 3130-F120-P7T1-W12QY7-7A 3130-F120-P7T1-W12QY7-7A
3130-F120-P7T1-W12QY7-5A 3130-F120-P7T1-W12QY7-5A 3130-F120-P7T1-W12QY7-5A
3130-F120-P7T1-W12QY7-3A 3130-F120-P7T1-W12QY7-3A 3130-F120-P7T1-W12QY7-3A
3130-F120-P7T1-W12QY7-15A 3130-F120-P7T1-W12QY7-15A 3130-F120-P7T1-W12QY7-15A
3130-F120-P7T1-W12QY7-10A 3130-F120-P7T1-W12QY7-10A 3130-F120-P7T1-W12QY7-10A
3130-F110-P7T1-W29AG3-10A 3130-F110-P7T1-W29AG3-10A 3130-F110-P7T1-W29AG3-10A
3130-F110-P7T1-W29AG2-5A 3130-F110-P7T1-W29AG2-5A 3130-F110-P7T1-W29AG2-5A
3130-F110-P7T1-W29AG2-4A 3130-F110-P7T1-W29AG2-4A 3130-F110-P7T1-W29AG2-4A
3130-F110-P7T1-W29AG2-10A 3130-F110-P7T1-W29AG2-10A 3130-F110-P7T1-W29AG2-10A
3130-F110-P7T1-W29A-2A 3130-F110-P7T1-W29A-2A 3130-F110-P7T1-W29A-2A
3130-F110-H7T1-W29AG3-2.5A 3130-F110-H7T1-W29AG3-2.5A 3130-F110-H7T1-W29AG3-2.5A
3130-F110-P7T1-W29AG2-3A 3130-F110-P7T1-W29AG2-3A 3130-F110-P7T1-W29AG2-3A
3130-F110-P7T1-W29AG2-2A 3130-F110-P7T1-W29AG2-2A 3130-F110-P7T1-W29AG2-2A
3130-F110-P7T1-W29AG2-15A 3130-F110-P7T1-W29AG2-15A 3130-F110-P7T1-W29AG2-15A
3130-F110-P7T1-W12QY6-5A 3130-F110-P7T1-W12QY6-5A 3130-F110-P7T1-W12QY6-5A
3130-F1B0-N7Q1-W19QG7-20A 3130-F1B0-N7Q1-W19QG7-20A 3130-F1B0-N7Q1-W19QG7-20A
3130-F311-P7T1-W12QY1-2.5A 3130-F311-P7T1-W12QY1-2.5A 3130-F311-P7T1-W12QY1-2.5A
3130-F311-P7T1-W12QY2-2.5A 3130-F311-P7T1-W12QY2-2.5A 3130-F311-P7T1-W12QY2-2.5A
3130-F311-P7T1-W12QY3-2.5A 3130-F311-P7T1-W12QY3-2.5A 3130-F311-P7T1-W12QY3-2.5A
3130-F120-P7T1-W29AB7-10A 3130-F120-P7T1-W29AB7-10A 3130-F120-P7T1-W29AB7-10A
3130-F120-P7T1-W29AB7-2.5A 3130-F120-P7T1-W29AB7-2.5A 3130-F120-P7T1-W29AB7-2.5A
3130-F130-P7T1-W12QY7-8A 3130-F130-P7T1-W12QY7-8A 3130-F130-P7T1-W12QY7-8A
PDF Datasheet Preview
Thermal Overcurrent Circuit Breaker 3130

Single, two and three pole rocker switch/thermal trip free circuit breakers S-type TO CBE to EN 60934 of compact design for snap-in panel mounting. Available either with protection on one/both/all poles or, in the case of the double pole version, protection on one pole only. Illumination is optional and there is a choice of rocker colours. Approved to CBE standard EN 60934 IEC

Motors, transformers, solenoids, household and office machines, electrical tools, mobile homes, boating, construction vehicles, medical equipment to EN
1 pole
3130
3 pole

Standard current ratings and typical internal resistance values

Technical data

Current rating A 1 2 3

Internal resistance per pole 94 24 12

Current rating A 4 5 6 7 8 10 12 14 15 16 18 20

Internal resistance per pole < < < < < < <

Illumination voltage/power consumption
operating voltage
6V 12 V 24 V 48 V 115 V 230 V 415 V * single pole version only
power consumption
filament/neon B LED G, R, Y
60 mA
20 mA
20 mA
20 mA
< 1 mA*
< 1 mA*
< 1 mA
not available

Approvals

Authority VDE EN 60934

UL, CSA

Voltage rating AC 240/415 V

DC 50 V

DC 28 V AC 250 V, DC 50 V 3 AC 250 V

Current rating
single pole multi pole single pole multi pole single pole

A 1 and 2 pole A 3 pole
All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.Product markings may not be exactly as the ordering codes. Errors and omissions excepted.

For further details please see chapter Technical Information

Voltage rating

AC 240 V 3 AC 415 V DC 50 V UL AC 250 V 3 AC 250 V DC 50 V

Current ratings

A 1 pole A 2 and 3 pole

Typical life AC 240 V DC 50 V:

DC 28 V:

AC 240 V A DC 50 V A
3 AC 415 V A Ambient temperature
1 pole 30,000 operations at 1 x IN, inductive 30,000 operations at 1 x IN, inductive 30,000 operations at 1 x IN, resistive 30,000 operations at 1 x IN, inductive 2 pole 50,000 operations at 1 x IN, inductive 50,000 operations at 1 x IN, inductive 3 pole 30,000 operations at 1 x IN, inductive
°C °F

Insulation co-ordination IEC 60664 and 60664 A
rated impulse
pollution
withstand voltage degree
reinforced insulation in operating area

Dielectric strength

IEC 60664 and 60664A test voltage
operating area

AC 3,000 V
current path/current path AC 1,500 V

Insulation resistance
>100 DC 500 V

Interrupting capacity Icn

A 14 + 16 A
10 x IN 150 A 250 A 150 A 130 A
1 pole 2 pole 3 pole 3 pole

Interrupting capacity UL 1077
1 + 2 pole AC 250V/3500A AC 250V/3500A
3 pole 3AC 250V/5000A
1 + 2 pole DC 50V/2000A DC 50V/2000A

Degree of protection IEC 60529/DIN 40050
operating area IP40 terminal area IP00

Vibration
5 g 57-500 Hz , mm 10-57 Hz to IEC 60068-2-6, test Fc 10 frequency cycles/axis

Shock
1 pole 25 g 11 ms 2 + 3 pole 20 g 11 ms to IEC 60068-2-27, test Ea

Corrosion
96 hours at 5 % salt mist, to IEC 60068-2-11, test Ka

Humidity
Ordering information - 1 pole
Ordering information - multipole

Type No.

Type No.
3130 rocker switch/circuit breaker
3130 rocker switch/circuit breaker multipole

Mounting

Mounting

F snap in frame

F snap in frame

Frame

Frame
1 standard
1 standard
3 special single pole version

Number of poles
1 single pole, thermally protected

Number of poles 2 pole, thermally protected 3 pole, thermally protected

A 1 pole, unprotected**
5 2 pole, thermally protected on one pole only

Frame mounting
6 3 pole, thermally protected on two poles only
0 panel thickness mm in only 3130-F1..-...

B 2 pole, unprotected**
1 panel thickness mm in only 3130-F3.1-...

C 3 pole, unprotected**

Terminal design

Frame mounting

P7 blade terminals DIN 46244-C-Ms-S QC 2x.110
0 panel thickness mm in only 3130-F1..-...

H7 for terminals terminal screws M

Terminal design
for terminals blade terminals QC 2x.110

P7 blade terminals DIN 46244-C-Ms-S QC 2x.110

N7 blade terminals QC 2x.110 , with shunt terminal

H7 for terminals terminal screws M

Characteristic curve
for terminals blade terminals

T1 thermal, IN Q1 switch, only with terminal design -N7

QC 2x.110 N7 blade terminals DIN 46244-C-Ms-S QC 2x.110 ,

Switch style
with shunt terminal
3130 - F 1 0 - P7 T1 - W 12 Q Y 7 - 5 A ordering example
8 320 - 450 V B

Current ratings
* N/A for non-illuminated version
** unprotected poles have to ordered with terminal design N7
*** without series resistor and diode, to be selected by customer.
3130 - F 1 3 0 - P7 T1 - W 12 Q B 7 - 5 A ordering example

Recommendation:
4-7 V Rv
* N/A for non-illuminated version
10-14 V Rv
** unprotected poles have to ordered with terminal design N7
20-28 V RV
diode 1N4007
05/06 290405

Thermal Overcurrent Circuit Breaker 3130

Dimensions

I.3 I.2

LINE I.I
terminal for illumination conductor size mm2 AWG26 , length 180 mm in.
switch only
20 34

LINE I.I
blade terminals DIN 46244-C-Ms-S QC 2x.110 P7 or N7

Side view

I.3 I.2

LINE I.I
20 34

LINE I.I
unit
blade terminals DIN 46244-C-Ms-S QC 2x.110 P7 or N7

Side view
.118R3
flat head screw M3.5x5 -MS ISO 1580 H7
tightening torque max. Nm

Panel cut-out
panel thickness mm in.
<<R.002.50
illuminated dot -.29AG.-
min. min

I.3 I.2

LINE I.I
20 34

LINE I.I
unit
blade terminals DIN 46244-C-Ms-S QC 2x.110 P7 or N7

Side view
Ordering information - IP 66

Dimensions 3130-F212-...

Type No.
3130 rocker switch/circuit breaker

Mounting

F snap in frame

Frame
2 splash water protected

Number of poles
1 single pole, thermally protected

A 1 pole, unprotected **

Frame mounting

GERMANY

LINE I.I
terminal for illumination flying lead conductor size mm2, length 180 mm in.
2 panel thickness mm

Terminal design P7 blade terminals DIN 46244-C-Ms-S QC 2x.110 H7 for terminals terminal screws M
for terminals 2 x blade terminals N7 blade terminals DIN 46244-C-Ms-S QC 2x.110 ,
with shunt terminal or for switch only
20 34
blade terminals DIN 46244-C-Ms-S QC 2x P7 or N7

Side view

Characteristic curve

T1 thermal, IN

LINE I.I

Q1 switch, only with terminal design -N7

Switch style

S 00 without actuator rocker X 222 420 must be ordered separately.
flat head screw M3.5x5 -MS ISO 1580 H7 tightening torque max. Nm

Available symbols see following pages.

S rocker

P momentary switch

Switch colour designation not S00
opaque
translucent
01 black
12 white
02 white
14 red
04 red
19 green
3130 F 2 1 2 - P7 T1 - S 12 Q Y 7 - 5 A ordering example

LINE I.I
* N/A for non-illuminated version ** unprotected poles have to ordered with terminal design N7 *** without series resistor and diode, to be selected by customer.

Recommendation 4-7 V Rv 0,43 10-14 V Rv 1,1 20-28 V RV 2,7 diode 1N4007
mounting area

This
metric
design
millimeter
dimensions
take
precedence
mm inch
05/06 290405

Thermal Overcurrent Circuit Breaker 3130

Internal connection diagrams
1 pole
line I.I
lamp
load
1 pole switch
line I.I
1 pole momentary switch
line I.I
lamp
load
lamp
load

Typical time/current characteristics
10000
1000
+60 °C +140 °F
+23 °C °F
-30 °C -22 °F

Trip time in seconds
10000
4 6 8 10
times rated current
1000
+60 °C +140 °F +23 °C °F
-30 °C -22 °F
All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.Product markings may not be exactly as the ordering codes. Errors and omissions excepted.
05/06 290405
More datasheets: 3130-F110-P7T1-W29AG3-10A | 3130-F110-P7T1-W29AG2-5A | 3130-F110-P7T1-W29AG2-4A | 3130-F110-P7T1-W29AG2-10A | 3130-F110-P7T1-W29A-2A | 3130-F110-H7T1-W29AG3-2.5A | 3130-F110-P7T1-W29AG2-3A | 3130-F110-P7T1-W29AG2-2A | 3130-F110-P7T1-W29AG2-15A | 3130-F110-P7T1-W12QY6-5A


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3130-F110-H7T1-W29AG3-10A Datasheet file may be downloaded here without warranties.

Datasheet ID: 3130-F110-H7T1-W29AG3-10A 510415