N550M4CC-TRAY

N550M4CC-TRAY Datasheet

Module Hardware • Integrated PCB meander antenna • On-board 32 kHz and 16 MHz crystal clocks • 1.8V to 3.6V supply voltage range • DC/DC converter • Operating temperature -25°C to +75°C N5150 and N548 -40°C to +85oC N550 • 24 GPIOs LGA package • Programmable output per channel from up to +4dBm • Excellent receiver sensitivity -90dBm ANT mode -93dBm BLE mode • 1dBm resolution RSSI • Total 256kB embedded flash memory and 16kB/32kB RAM • SPI, I2C and UART interface • ARM SWD interface • 14.0x9.8x2.0mm LGA package • Drop-in compatible options with AP2/C7 modules • Radio regulatory approval for major markets • BLUETOOTH SIG qualification • RoHS compliant

Part	Datasheet
N550M4CC-TRAY	N550M4CC-TRAY (pdf)

Related Parts	Information
N5150M5CD	N5150M5CD
N550M4CC-REEL	N550M4CC-REEL
N550M8CC-REEL	N550M8CC-REEL
N550M8CC-TRAY	N550M8CC-TRAY

PDF Datasheet Preview
N5 ANT SoC Module Series Operation when loaded with the latest S210 or S310 SoftDevice • 79 selectable RF channels 2402 to 2480 MHz • Simple to complex network topologies peer-to- peer, star, tree, star-to-star and more • Broadcast, acknowledged, and burst data communication modes • Built-in device search and pairing • Built-in interference handling and radio coexistence management with application radio disable requests and application flash write/erase requests • Enhanced ANT features - Supports up to 15 logical channels each with configurable channel periods 5.2ms - 2s - Advanced burst data transfer modes up to 60kbps - Optional channel encryption mode AES-128 - Supports up to 8 public, private and/or managed networks - Advanced power management features to optimize application power consumption including Event Filtering and Selective data updates - Asynchronous transmit channel - Fast channel initiation Low Energy Peripheral Operation when loaded with the latest S310 SoftDevice • ANT operation functions as S210 • BLUETOOTH compliant low energy single- mode protocol stack - Link Layer - L2CAP,ATT, and SM protocols - GATT,GAP, and L2CAP - Peripheral and Broadcaster roles - GATT Client and Server - Full SMP support including MITM and OOB pairing Module Hardware • Integrated PCB meander antenna • On-board 32 kHz and 16 MHz crystal clocks • 1.8V to 3.6V supply voltage range • DC/DC converter • Operating temperature -25°C to +75°C N5150 and N548 -40°C to +85oC N550 • 24 GPIOs LGA package • Programmable output per channel from up to +4dBm • Excellent receiver sensitivity -90dBm ANT mode -93dBm BLE mode • 1dBm resolution RSSI • Total 256kB embedded flash memory and 16kB/32kB RAM • SPI, I2C and UART interface • ARM SWD interface • 14.0x9.8x2.0mm LGA package • Drop-in compatible options with AP2/C7 modules • Radio regulatory approval for major markets • BLUETOOTH SIG qualification • RoHS compliant Series Members - N5150M8CD, N5150M4CD, N5150M5CD - N550M8CC, N550M4CC - N548M8CB, N548M4CB, N548M5CB All these modules are pre-loaded with the S210 SoftDevice, the ANT-WP bootloader and an ANT network processor application code Page 2 of 37 N5 ANT SoC Module Series, Rev Contents 1 N5 ANT SoC Module Series Nomenclature Production Tracking Models N5 ANT SoC Module Starter 2 Product Block Diagram 10 N5 Module Preloaded Software 12 N5 Module Programming 12 Programming via SWD Programming Over the Initializing the Configuring the DC/DC Converter 13 Design Considerations 13 M8 Module Mounting 13 M4 Module Mounting 14 M5 Module Mounting 14 Assembly Considerations 14 Moisture Control 14 Solder Stencil Design of M8 Module 15 Cleaning Process 15 The N5 ANT SoC Module Starter Kit, ordering number “N5DK1”, contains all the pieces you need to start evaluation and development using the N5 ANT SoC module, as well as the nRF51422 IC. dynastream.com thisisant.com Page 9 of 37 The kit contains the following hardware pieces as described in Table 2, with a pre-loaded application ready to be demonstrated when opening the box. Additional reference application code is available on Most of the parts are orderable individually to create a more complex network. Order Number Part Description Quantity N5150M5CD* Module with 20-pin Molex connector ANTBAT2 ANTIO1 ANTUIF1 Battery board with a Molex socket, a reset button and a five-position dip switch I/O board with a Molex connector, a Molex socket, 4 LEDs and 4 buttons USB Interface Board with a Molex socket Segger J-Link Lite Programmer Note Starter kits before the release of N5150M5CD contain N548M5CB instead. Table 2 N5 ANT SoC Module Starter Kit dynastream.com thisisant.com Page 10 of 37 2 Product Overview Block Diagram N5 ANT SoC Module Series, Rev Pin-outs Figure 3 N5 ANT SoC Module Series Block Diagram Figure 4 N5 M8 LGA Bottom View Figure 5 N5 M4 Bottom View dynastream.com thisisant.com Page 11 of 37 Figure 6 N5 M5 Module Bottom View N5 M8 LGA Pad A2-6 B1 B2 B3 B4 B5, B6 C1 C2 C3 C4 C5, C6 D1 D2 D3 D4 D5 D6 E1 E2 E3 E4 E5 E6 F1 F2 F3 F4 F5 F6 N5 M4 Pin N5 M5 Molex Connector 19 10 nRF51422 Pin Name GND RST /SWDIO P018 P020 P019 Vcc SWDCLK P013 P016 P022 Vcc P012 P015 P025 P023 P021 P024 P009 P011 P006 P004 P000 P030 P008 P005 P003 P001 P002 P031

PDF Datasheet Preview

N5 ANT SoC Module Series

Operation when loaded with the latest S210 or S310 SoftDevice
• 79 selectable RF channels 2402 to 2480 MHz
• Simple to complex network topologies peer-to-
peer, star, tree, star-to-star and more
• Broadcast, acknowledged, and burst data
communication modes
• Built-in device search and pairing
• Built-in interference handling and radio
coexistence management with application radio disable requests and application flash write/erase requests
• Enhanced ANT features - Supports up to 15 logical channels each with
configurable channel periods 5.2ms - 2s - Advanced burst data transfer modes up to
60kbps - Optional channel encryption mode AES-128 - Supports up to 8 public, private and/or
managed networks - Advanced power management features to
optimize application power consumption including Event Filtering and Selective data updates - Asynchronous transmit channel - Fast channel initiation

Low Energy Peripheral Operation when loaded with the latest S310 SoftDevice
• ANT operation functions as S210
• BLUETOOTH compliant low energy single-
mode protocol stack - Link Layer - L2CAP,ATT, and SM protocols - GATT,GAP, and L2CAP - Peripheral and Broadcaster roles - GATT Client and Server - Full SMP support including MITM and OOB
pairing

Module Hardware
• Integrated PCB meander antenna
• On-board 32 kHz and 16 MHz crystal clocks
• 1.8V to 3.6V supply voltage range
• DC/DC converter
• Operating temperature -25°C to +75°C N5150 and N548 -40°C to +85oC N550
• 24 GPIOs LGA package
• Programmable output per channel from up to +4dBm
• Excellent receiver sensitivity -90dBm ANT mode -93dBm BLE mode
• 1dBm resolution RSSI
• Total 256kB embedded flash memory and 16kB/32kB RAM
• SPI, I2C and UART interface
• ARM SWD interface
• 14.0x9.8x2.0mm LGA package
• Drop-in compatible options with AP2/C7 modules
• Radio regulatory approval for major markets
• BLUETOOTH SIG qualification
• RoHS compliant

Series Members - N5150M8CD, N5150M4CD, N5150M5CD - N550M8CC, N550M4CC - N548M8CB, N548M4CB, N548M5CB

All these modules are pre-loaded with the S210 SoftDevice, the ANT-WP bootloader and an ANT network processor application code

Page 2 of 37

N5 ANT SoC Module Series, Rev

Contents
1 N5 ANT SoC Module Series

Nomenclature

Production Tracking

Models

N5 ANT SoC Module Starter
2 Product

Block Diagram 10

N5 Module Preloaded Software 12

N5 Module Programming 12

Programming via SWD

Programming Over the

Initializing the

Configuring the DC/DC Converter 13

Design Considerations 13

M8 Module Mounting 13

M4 Module Mounting 14

M5 Module Mounting 14

Assembly Considerations 14

Moisture Control 14

Solder Stencil Design of M8 Module 15

Cleaning Process 15
The N5 ANT SoC Module Starter Kit, ordering number “N5DK1”, contains all the pieces you need to start evaluation and development using the N5 ANT SoC module, as well as the nRF51422 IC.
dynastream.com thisisant.com

Page 9 of 37

The kit contains the following hardware pieces as described in Table 2, with a pre-loaded application ready to be demonstrated when opening the box. Additional reference application code is available on Most of the parts are orderable individually to create a more complex network.

Order Number

Part Description

Quantity

N5150M5CD*

Module with 20-pin Molex connector

ANTBAT2 ANTIO1 ANTUIF1

Battery board with a Molex socket,
a reset button and a five-position
dip switch

I/O board with a Molex connector, a

Molex socket, 4 LEDs and 4 buttons

USB Interface Board with a Molex
socket

Segger J-Link Lite Programmer

Note Starter kits before the release of N5150M5CD contain N548M5CB instead.

Table 2 N5 ANT SoC Module Starter Kit
dynastream.com thisisant.com

Page 10 of 37
2 Product Overview

Block Diagram

N5 ANT SoC Module Series, Rev

Pin-outs

Figure 3 N5 ANT SoC Module Series Block Diagram

Figure 4 N5 M8 LGA Bottom View

Figure 5 N5 M4 Bottom View dynastream.com thisisant.com

Page 11 of 37

Figure 6 N5 M5 Module Bottom View

N5 M8 LGA Pad

A2-6 B1

B2 B3 B4 B5, B6 C1 C2 C3 C4 C5, C6 D1 D2 D3 D4 D5 D6 E1 E2 E3

E4 E5 E6 F1 F2 F3 F4 F5 F6

N5 M4 Pin

N5 M5 Molex Connector
19 10
nRF51422 Pin Name

GND RST /SWDIO P018 P020 P019 Vcc SWDCLK P013 P016 P022 Vcc P012 P015 P025 P023 P021 P024 P009 P011 P006

P004 P000 P030 P008 P005 P003 P001 P002 P031

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived N550M4CC-TRAY Datasheet file may be downloaded here without warranties.

Datasheet ID: N550M4CC-TRAY 510304