PT8A977B/978B/978BL 5-Function Remote Controller
Part | Datasheet |
---|---|
![]() |
PT8A978BLWE (pdf) |
Related Parts | Information |
---|---|
![]() |
PT8A977BUWF |
![]() |
PT8A977BPE |
![]() |
PT8A978BPE |
![]() |
PT8A978BUWF |
![]() |
PT8A977BDE |
![]() |
PT8A977BWEX |
![]() |
PT8A977BWE |
PDF Datasheet Preview |
---|
PT8A977B/978B/978BL 5-Function Remote Controller • PT8A977B works as encoder and PT8A978B/ 978BL works as decoder • Five pins for five control functions • Operating power-supply voltage 2.5V to 5.0V 978B , 2.0V to 5.0V 978BL , 1.8V to 5.0V 977B • Auto-power-off and oscillation-off if no press on any button 977B • Press on any button to wake up 977B • One output pin used for external power control , 16-pin SOIC, die form and wafer form The PT8A977B and PT8A978B or 978BL provide complete control functions to the remote-controlled toy. The PT8A977B has five input pins corresponding with the five function buttons i.e, forward, backward, rightward, leftward and turbo. The encoding circuit in the PT8A977B sends digital codes to the two output pins SO and SC. The digital codes correspond to the definite function buttons or their combinations. The SO and SC outputs are used in wireless and infra-red applications respectively. The PT8A978B or 978BL has five output pins corresponding with the five actions. The received signals are amplified by the three-stage amplifier, and then the appropriate amplified signals are sampled, fault-tolerantly checked and decoded to control the actions of the remotecontrolled toy. Ordering Information Pa ck a ge PT8A977BPE Lead free 14-pin DIP PT8A977BWE PT8A977BDE Lead free and Green 14-pin SOIC Die Form PT8A977BUWF Wafer Form PT8A978BPE Lead free 16-pin DIP PT8A978BLWE Lead free and Green 16-pin SOIC PT8A978BDE Die Form PT8A978BUWF Wafer Form Note: Adding E= Pb-free or Pb-free and Green Adding X suffix=Tape/Reel There is an internal oscillator in the PT8A977B and 978B/ 978BL respectively. By adding an external resistor conveniently, the oscillator will be constructed. The oscillator frequency can be adjusted by the external resistor. The relative error between the frequencies of the two on-chip oscillators in the PT8A977B and PT8A978B/978BL must be less than The auto-power-off function is achieved by an internal counter 977B . The PC output is used to control on/off state of the external power supply. Press on any function button will wake up the chip promptly. 12-07-0007 PT0085-10 07/06/2012 Block Diagram Block Diagram of 977B OSCI OSCO Right Left Turbo Forward Backward Oscillator Input Circuit PT8A977B/978B/978BL 5-Function Remote Controller Timing Generator Encoding Output Circuit Circuit SC Block Diagram of 978B/978BL OSCI OSCO |
More datasheets: TARQ335M006 | TARQ104M035 | ASMT-UAB4-PU802 | ASMT-URB4-PU802 | ELSS-405SYGWA/S530-E2 | SEN0134 | PT8A977BUWF | PT8A977BPE | PT8A978BPE | PT8A978BUWF |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PT8A978BLWE Datasheet file may be downloaded here without warranties.