Part | Datasheet |
---|---|
![]() |
ASMT-UAB4-PU802 (pdf) |
Related Parts | Information |
---|---|
![]() |
ASMT-URB4-PU802 |
PDF Datasheet Preview |
---|
Surface Mount LED Indicator Description This family of SMT LEDs is packaged in the industry standard package. These SMT LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions. To facilitate easy pick & place assembly, the LEDsare packed in tape and reel. Every reel will be shipped in single intensity and color bin, except red color, to provide close uniformity. These LEDs are compatible with IR solder reflow process. Due to the high reliability feature of these products, they can also be mounted using soldering process. The super wide viewing angle at makes these LEDs ideally suited for office equipment, industrial equipment, and home appliances. The flat top emitting surface makes it easy for these LEDsto mate with light pipes. With the reflector pushing up the intensity of the light output, these LEDs are also suitable to be used as LED pixels in interior electronic signs. Features • Industry standard package • High reliability LED package • High brightness using AlInGaP dice technologies • Available in Red and Amber color • Super wide viewing angle at • Available in 8 mm carrier tape on 7 inch reel 2000 pieces • Compatible with both IR and TTW soldering process Applications • Electronic signs and signals - Interior full color sign - Variable message sign • Office automation, home appliances, industrial equipment - Front panel backlighting - Push button backlighting - Display backlighting CAUTION LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note for additional details. Package Dimensions Anode Marking NOTE ALL DIMENSIONS IN MILLIMETERS. Table Device Selection Guide Color Amber Min. Iv mcd Max. Iv mcd Test Current mA Dice Technology AllnGaP AllnGaP Notes The luminous intensity IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. IV Tolerance = ±12% Part Numbering System A S M T U x1 B 4 P x2 x3 x4 x5 Packaging Option Color Bin Selection Intensity Bin Selection LED Chip Color Table Absolute Maximum Ratings TA = 25 °C Parameters DC Forward Current [1] Peak Forward Current [2] 30mA 100mA Power Dissipation 63 mW Junction Temperature 110 °C Operating Temperature 55 °C to + 100 °C Storage Temperature 55 °C to + 100 °C Derate linearly as shown in Figure Duty Factor = 10%, Frequency = 1kHz. Drive current between 10 mA and 30 mA is recommended for best long term performance. Operation at current below 5 mA is not recommended. Table Optical Characteristics TA = 25 °C |
More datasheets: TARQ225M015 | TARQ225K015 | TARQ105K020 | TARQ104M050 | TARQ334M035 | TARQ104K050 | TARQ104K035 | TARQ104J050 | TARQ335M006 | TARQ104M035 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ASMT-UAB4-PU802 Datasheet file may be downloaded here without warranties.