MBRM3100-13-F

MBRM3100-13-F Datasheet

MBRM3100

Part	Datasheet
MBRM3100-13-F	MBRM3100-13-F (pdf)

Related Parts	Information
MBRM3100-13	MBRM3100-13

PDF Datasheet Preview
MBRM3100 3A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERMITEâ3 SPICE MODEL MBRM3100 • Guard Ring Die Construction for Transient Protection Inverters, Free Wheeling, and Polarity Protection Applications Mechanical Data • Case POWERMITEâ3, Molded Plastic • Plastic Material UL Flammability Classification Rating 94V-0 • Moisture sensitivity Level 1 per J-STD-020A • Terminals Solderable per MIL-STD-202, Method 208 • Polarity See Diagram • Marking See Page 3 • Weight grams approx. • Ordering Information See Page 3 PIN 1 PIN 2 PIN 3, BOTTOMSIDE HEAT SINK irNote Pins 1 & 2 must be electrically connected at the printed circuit board. POWERMITEâ3 Dim Min Max All Dimensions in mm Maximum Ratings TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by Characteristic Average Rectified Output Current Also see Figure 5 Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load JEDEC Method TC = 90°C Typical Thermal Resistance Junction to Soldering Point Typical Thermal Resistance Junction to Case Operating Temperature Range Storage Temperature Range Symbol VRRM VRWM VR RMS IO IFSM RqJS RqJC Tj TSTG Value -55 to +125 -55 to +150 Unit °C/W °C/W °C °C Electrical Characteristics TA = 25°C unless otherwise specified Forward Voltage Note 1 Symbol V BR R IR CT Min Typ Max Unit Test Condition V IR = 0.2mA IF = 3A, Tj = 25°C IF = 3A, Tj = 100°C IF = 6A, Tj = 25°C IF = 6A, Tj = 100°C 100 mA Tj = 25°C, VR = 100V 20 mA Tj = 100°C, VR = 100V pF f = 1.0MHz, VR = 4.0V DC Ordering Information Note 7 Device MBRM3100-13 Packaging POWERMITEâ3 Shipping 5000/Tape & Reel TA = TSOLDERING POINT, RqJS = 3.5°C/W, RqSA = 0°C/W. Device mounted on GETEK substrate, 2”x2”, 2 oz. copper, double-sided, cathode pad dimensions x anode pad dimensions x RqJA in range of 30-35°C/W. Device mounted on FR-4 substrate, 2”x2”, 2 oz. copper, single-sided, pad layout as per Diodes Inc. suggested pad layout document AP02001 which can be found on our website at RqJA in range of 115-125°C/W. Maximum power dissipation when the device is mounted in accordance to the conditions described in Note Maximum power dissipation when the device is mounted in accordance to the conditions described in Note For Packaging Details, go to our website at Marking Information MBRM3100 YYWW K MBRM3100 = Product type marking code = Manufacturers’ code marking YYWW = Date code marking YY = Last digit of year ex 02 for 2002 WW = Week code 01 to 52 K = Factory Designator POWERMITE is a registered trademark of Microsemi Corporation. 3 of 3 MBRM3100

PDF Datasheet Preview

MBRM3100
3A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER

POWERMITEâ3

SPICE MODEL MBRM3100
• Guard Ring Die Construction for Transient Protection

Inverters, Free Wheeling, and Polarity Protection Applications

Mechanical Data
• Case POWERMITEâ3, Molded Plastic
• Plastic Material UL Flammability

Classification Rating 94V-0
• Moisture sensitivity Level 1 per J-STD-020A
• Terminals Solderable per MIL-STD-202,
Method 208
• Polarity See Diagram
• Marking See Page 3
• Weight grams approx.
• Ordering Information See Page 3

PIN 1 PIN 2

PIN 3, BOTTOMSIDE HEAT SINK
irNote Pins 1 & 2 must be electrically connected at the printed circuit board.

POWERMITEâ3

Dim Min Max

All Dimensions in mm

Maximum Ratings TA = 25°C unless otherwise specified

Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by

Characteristic

Average Rectified Output Current Also see Figure 5

Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load

JEDEC Method

TC = 90°C

Typical Thermal Resistance Junction to Soldering Point

Typical Thermal Resistance Junction to Case

Operating Temperature Range

Storage Temperature Range

Symbol VRRM VRWM VR RMS IO

IFSM

RqJS RqJC

Tj TSTG

Value
-55 to +125 -55 to +150

Unit
°C/W °C/W
°C °C

Electrical Characteristics TA = 25°C unless otherwise specified

Forward Voltage Note 1

Symbol V BR R

IR CT

Min Typ Max Unit

Test Condition

V IR = 0.2mA

IF = 3A, Tj = 25°C

IF = 3A, Tj = 100°C IF = 6A, Tj = 25°C

IF = 6A, Tj = 100°C
100 mA Tj = 25°C, VR = 100V
20 mA Tj = 100°C, VR = 100V
pF f = 1.0MHz, VR = 4.0V DC
Ordering Information Note 7

Device MBRM3100-13

Packaging POWERMITEâ3

Shipping 5000/Tape & Reel

TA = TSOLDERING POINT, RqJS = 3.5°C/W, RqSA = 0°C/W.

Device mounted on GETEK substrate, 2”x2”, 2 oz. copper, double-sided, cathode pad dimensions x anode pad dimensions x RqJA in range of 30-35°C/W.

Device mounted on FR-4 substrate, 2”x2”, 2 oz. copper, single-sided, pad layout as per Diodes Inc. suggested pad layout document AP02001 which can be found on our website at RqJA in range of 115-125°C/W.

Maximum power dissipation when the device is mounted in accordance to the conditions described in Note Maximum power dissipation when the device is mounted in accordance to the conditions described in Note For Packaging Details, go to our website at

Marking Information

MBRM3100

YYWW K

MBRM3100 = Product type marking code = Manufacturers’ code marking

YYWW = Date code marking YY = Last digit of year ex 02 for 2002 WW = Week code 01 to 52 K = Factory Designator

POWERMITE is a registered trademark of Microsemi Corporation.
3 of 3

MBRM3100

More datasheets: BSS138TC | BSS138-7 | M3446 SL002 | M3446 SL005 | M3446 SL001 | MT3030W | MT3000W | SN761673DAER | SN761673DAERG4 | MBRM3100-13

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MBRM3100-13-F Datasheet file may be downloaded here without warranties.

Datasheet ID: MBRM3100-13-F 509997