DSR6V600P5-13

DSR6V600P5-13 Datasheet

DSR6V600P5

Part	Datasheet
DSR6V600P5-13	DSR6V600P5-13 (pdf)

PDF Datasheet Preview
Product Summary VRRM V 600 IO A 6 TRR max nS QRR typ. nC Description and Applications This DIODESTAR rectifier has been optimized for Power Factor Correction circuits operating in continuous conduction mode CCM . It is also suitable for use as a re-circulating diode in High Intensity Discharge Lighting. • CCM Power Factor Correction • High Intensity Discharge Lighting • Motor control DSR6V600P5 6A DIODESTAR RECTIFIER • Soft switching, low EMI • 175°C maximum operating junction temperature • Thermally efficient, small form factor package enables higher density designs. • Off board profile of 1.1mm, ideal for use in low profile applications • Lead Free Finish, RoHS Compliant Note 1 • “Green” Molding Compound No Br, Sb Mechanical Data • Case • Case Material Molded Plastic, UL Flammability Classification Rating 94V-0 • Moisture Sensitivity Level 1 per J-STD-020 • Terminals Finish - Matte Tin annealed over Copper lead frame. Solderable per MIL-STD-202, Method 208 • Weight grams approximate Top View Bottom View LEFT PIN RIGHT PIN BOTTOMSIDE HEAT SINK Note Pins Left & Right must be electrically connected at the printed circuit board. Ordering Information Note 2 Part Number DSR6V600P5-13 Case Packaging 5000/Tape & Reel EU Directive 2002/95/EC RoHS . All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. For packaging details, go to our website at Marking Information S6V600 YYWWK S6V600 = Product Type Marking Code = Manufacturers’ Code Marking YYWW = Date Code Marking YY = Last Two Digits of Year ex 09 for 2009 WW = Week Code 01 53 K = Factory Designator POWERDI is a registered trademark of Diodes Incorporated. DSR6V600P5 1 of 5 September 2011 Diodes Incorporated DSR6V600P5 Maximum Ratings = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by Characteristic Value Unit VRRM VRWM Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM Thermal Characteristics Characteristic Maximum Thermal Resistance Thermal Resistance Junction to Ambient Note 4 Thermal Resistance Junction to Ambient Note 5 Operating and Storage Temperature Range TJ, TSTG Value 104 30 -65 to +175 Unit ºC/W Electrical Characteristics = 25°C unless otherwise specified Characteristic Forward Voltage Drop Leakage Current Note 3 Symbol Min Unit Test Condition IF = 6A, TJ = 25ºC uA VR = 600V, TJ = 25ºC IF = 0.5A, IR = 1A, IRR = 0.25A ns IF = 1A, VR = 30V, di/dt = 50A/µs

PDF Datasheet Preview

Product Summary

VRRM V 600

IO A 6

TRR max nS

QRR typ. nC

Description and Applications

This DIODESTAR rectifier has been optimized for Power Factor Correction circuits operating in continuous conduction mode CCM . It is also suitable for use as a re-circulating diode in High Intensity Discharge Lighting.
• CCM Power Factor Correction
• High Intensity Discharge Lighting
• Motor control

DSR6V600P5
6A DIODESTAR RECTIFIER
• Soft switching, low EMI
• 175°C maximum operating junction temperature
• Thermally efficient, small form factor package enables higher
density designs.
• Off board profile of 1.1mm, ideal for use in low profile
applications
• Lead Free Finish, RoHS Compliant Note 1
• “Green” Molding Compound No Br, Sb

Mechanical Data
• Case
• Case Material Molded Plastic, UL Flammability Classification

Rating 94V-0
• Moisture Sensitivity Level 1 per J-STD-020
• Terminals Finish - Matte Tin annealed over Copper lead frame.

Solderable per MIL-STD-202, Method 208
• Weight grams approximate

Top View

Bottom View

LEFT PIN RIGHT PIN

BOTTOMSIDE HEAT SINK

Note Pins Left & Right must be electrically connected at the printed circuit board.
Ordering Information Note 2

Part Number DSR6V600P5-13

Case

Packaging 5000/Tape & Reel

EU Directive 2002/95/EC RoHS . All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. For packaging details, go to our website at

Marking Information

S6V600 YYWWK

S6V600 = Product Type Marking Code = Manufacturers’ Code Marking

YYWW = Date Code Marking YY = Last Two Digits of Year ex 09 for 2009 WW = Week Code 01 53 K = Factory Designator

POWERDI is a registered trademark of Diodes Incorporated.

DSR6V600P5
1 of 5

September 2011

Diodes Incorporated

DSR6V600P5

Maximum Ratings = 25°C unless otherwise specified

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitance load, derate current by

Characteristic

Value

Unit

VRRM

VRWM

Average Rectified Output Current

Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load

IFSM

Thermal Characteristics

Characteristic Maximum Thermal Resistance Thermal Resistance Junction to Ambient Note 4 Thermal Resistance Junction to Ambient Note 5 Operating and Storage Temperature Range

TJ, TSTG

Value
104 30 -65 to +175

Unit ºC/W

Electrical Characteristics = 25°C unless otherwise specified

Characteristic Forward Voltage Drop Leakage Current Note 3

Symbol Min

Unit

Test Condition

IF = 6A, TJ = 25ºC
uA VR = 600V, TJ = 25ºC

IF = 0.5A, IR = 1A, IRR = 0.25A ns IF = 1A, VR = 30V,
di/dt = 50A/µs

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DSR6V600P5-13 Datasheet file may be downloaded here without warranties.

Datasheet ID: DSR6V600P5-13 508506