XEB09-CIPAF

XEB09-CIPAF Datasheet


XEB09-CIPA XEB09-CIPAF XEB09-CIPA-W XEB09-CISA XEB09-CISAF XEB09-CISAFB XEB09-CISA-W

Part Datasheet
XEB09-CIPAF XEB09-CIPAF XEB09-CIPAF (pdf)
Related Parts Information
XEB09-CIPA-W XEB09-CIPA-W XEB09-CIPA-W
XEB09-CISA-W XEB09-CISA-W XEB09-CISA-W
PDF Datasheet Preview
900 MHZ WIRELESS ETHERNET BRIDGE

XPRESS ETHERNET BRIDGE

The XPress Ethernet Bridge provides a secure point-to-point or point-to-multipoint IP connection without the expense and limitations of physical cabling

The XPress Ethernet Bridge replaces costly wiring with a solution that can wirelessly connect industrial PLCs, digital signs, security cameras, access controllers and more. With a range of up to 15 miles, the ability to transmit through as many as 10 standard walls, a Mbps data rate, and the added range and capabilities of the 900 MHz band, the easy-to-use, long-range XPress Ethernet Bridge communicates where Wi-Fi and other wireless data products fall short.

The XPress Ethernet Bridge features a built-in spectrum analyzer, allowing users to monitor RF interference. Frequency agility enables the product to automatically select the best
available radio channel at start-up, monitor the signalto-noise ratio and move the network to a new channel if necessary. A web interface simplifies installation, allows users to monitor packet success and signal strength and facilitates remote troubleshooting.

The XPress Ethernet Bridge is housed in a weatherproof enclosure. It is available in pre-paired units or single units for point-to-multipoint applications.

BENEFITS Easy-to-use web interface simplifies configuration
and remote troubleshooting Check packet success and signal strength with the
web interface Outdoor line-of-sight range of up to 15 miles
with high gain antenna AES encryption, FIPS 197 and optional FIPS 140-2
provide secure communication Built-in NAT supports multiple IP client devices Frequency agility ensures reliable connection between
radios Monitor RF interference with built-in spectrum analyzer

RELATED PRODUCTS

RF Modem

Digi XLR Pro

Module

Adapter

APPLICATION EXAMPLE

CENTRAL OFFICE

Industrial PLC OR

XPRESS ETHERNET BRIDGE

RF Signal

Network Camera OR

Access Controller OR

VoIP Phone

XPRESS ETHERNET BRIDGE

Network Printer OR

Wi-Fi Access

SPECIFICATIONS

PERFORMANCE INDOOR/URBAN RANGE OUTDOOR/RF LINE-OF-SIGHT RANGE TRANSMIT POWER OUTPUT THROUGHPUT DATA RATE RF DATA RATE RECEIVER SENSITIVITY FEATURES SUPPPORTED PROTOCOLS BROWSER MANAGEMENT TOOLS DATA CONNECTION INTERFERENCE IMMUNITY ENCRYPTION RADIO CHANNELS/BANDWIDTH FREQUENCY BAND FREQUENCY AGILITY MANUAL FREQUENCY MODE STATUS LEDS ERROR-CORRECTION TECHNIQUE ADJACENT-BAND REJECTION REGULATOR TYPE ANTENNA CONNECTOR POE POWER OVER ETHERNET SUBSCRIBER UNITS SERIAL NUMBER BASED MATING PROTOCOL DIMENSIONS L X W X H AND WEIGHT POWER REQUIREMENTS POWER CONSUMPTION TRANSMIT CURRENT DRAW POWER CONNECTOR ENVIRONMENTAL OPERATING TEMPERATURE WEATHERPROOFING REGULATORY APPROVALS FCC U.S.A IC CANADA ETSI EUROPE C-TICK AUSTRALIA TELEC JAPAN

XPress Ethernet Bridge

Up to 1000 ft 300 m w/ dB dipole antenna Up to 2 miles km w/ dB dipole antenna, Up to 15 miles 24 km w/ high-gain antenna 125 mW +21 dBm , 4W EIRP w/ 15 dBi antenna 935 Kbps Mbps -97 dBm BER

TCP/IP, Rockwell RSLinx EtherNet/IP, CSP , Modbus/TCP QoS statistics, Network settings, Spectrum analyzer, Firmware upgrading 10/100Base-T RJ-45, Auto MDI/MDIX DSSS Direct Sequence Spread Spectrum 128-bit AES, FIPS 197/NIST certified optional FIPS 140-2 12 channels 6 in international version with MHz spacing and MHz occupied bandwidth ISM 902-928 MHz 915-928 MHz international version Radio channel automatically selected and adaptively optimized Channel selected with DIP switch or web browser interface Power, RF TX/RX, Ethernet link, channel, link quality Sub-block error detection and retransmission >60 dB - SAW receiver filter attenuates cellular and pager interference Switching regulator RF RPTNC female Proprietary system included Up to 16 active 63 total per access point Yes in x in x in cm x cm x cm 415 grams

Transmit 1.7W, Receive 0.8W 9 - 48 VDC Power over Ethernet, 175 mA at 9 VDC, 140 mA at 12 VDC, 35 mA at 48 VDC Use PoE injector, power jack P5-2.1 mm center positive

Radio/Enclosure -40° C to +70° C POE injector -40° C to +85° C Power supply 0° C to +40° C The XPress Ethernet Bridge is IP65 rated. The PoE injector and power supply are not weatherproof and should be installed indoors.

Yes N/A Yes N/A

PART NUMBERS

XEB09-CIPA XEB09-CIPAF XEB09-CIPA-W XEB09-CISA XEB09-CISAF XEB09-CISAFB XEB09-CISA-W

XPress Ethernet Bridge, Pair XPress Ethernet Bridge, Pair - with FIPS 140-2 XPress Ethernet Bridge, Pair International XPress Ethernet Bridge, Single XPress Ethernet Bridge, Single - with FIPS 140-2 XPress Ethernet Bridge, Radio Board - with FIPS 140-2 XPress Ethernet Bridge, Single International

DIGI SERVICE AND SUPPORT / You can purchase with confidence knowing that Digi is always available to serve you with expert technical support and our industry leading warranty. For detailed information visit
More datasheets: CPC7584BCTR | CPC7584MATR | CPC7584MBTR | CPC7584MCTR | RPS8-750ATX-XE | 44101 | BEAGLEXM | CY2DP818ZXI-2 | CY2DP818ZXC-2 | XEB09-CIPA-W


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived XEB09-CIPAF Datasheet file may be downloaded here without warranties.

Datasheet ID: XEB09-CIPAF 509682