Part | Datasheet |
---|---|
![]() |
XBP09-DPSIT-156J (pdf) |
Related Parts | Information |
---|---|
![]() |
XBP09-DPUIT-156J |
![]() |
XBP09-DPWIT-156J |
![]() |
XBP09-DPUIT-156 |
![]() |
XBP09-DPSIT-156 |
![]() |
XBP09-DPWIT-156 |
![]() |
XBP09-DMDK |
PDF Datasheet Preview |
---|
Point-to-Multipoint Embedded RF Modules for OEMs XBee-PRO 900 modules deliver device connectivity with exceptional RF range performance using a fast point-to-multipoint protocol. Overview XBee-PRO 900 embedded RF modules provide extended-range wireless connectivity to end-point devices. These modules use a proprietary 900 MHz point-to-multipoint protocol that balances overall RF performance with a fast 156 Kbps data rate to the end node. Supporting RF line-of-sight distances of up to 6 miles with high gain antennas , they are ideal for extended-range wireless applications requiring low latency and increased data throughput. As a part of Digi’s family of RF products, these modules are easy to use, share a common hardware footprint, and are fully interoperable with other XBee products utilizing the same technology. They are available in a variety of different protocols to suit different applications, enabling users to substitute one XBee module for another with minimal development time and risk. Digi’s unsurpassed offering of Drop-in Networking products provides users with seamless communication between devices. XBee adapters provide wireless connectivity to electronic devices in wired networks. ConnectPort X gateways enable users to access and configure remote devices in a network. Related Products Gateways Modules Adapters Development Kits Network Extenders Accessories Application Highlight Features/Benefits • No configuration needed for out-of-the-box RF communications • Common XBee footprint for a variety of RF modules • 900 MHz for extended-range operation • Outdoor RF line-of-sight range up to 6 miles 10 km • Fast 156 Kbps RF data rate • Sleep modes supported for increased battery life • Multiple antenna options • Capable of deploying the DigiMesh protocol with a simple firmware change Platform Performance RF Data Rate Indoor/Urban Range Outdoor/RF Line-of-Sight Range Outdoor/RF Line-of-Sight Range w/ High-Gain Antenna Transmit Power Receiver Sensitivity 10% PER Features Serial Data Interface Configuration Method Frequency Band Interference Immunity Serial Data Rate ADC Inputs Digital I/O Antenna Options Networking & Security Encryption Reliable Packet Delivery Addressing Options Channels Power Requirements Supply Voltage Transmit Current Receive Current Power-Down Current Regulatory Approvals FCC USA IC Canada C-TICK Australia Star Visit for part numbers. 156 Kbps 450 ft 140 m Up to miles 3 km Up to 6 miles 10 km 50 mW +17 dBm -100 dBm 3.3V CMOS Serial UART 5V tolerant inputs API orATAT&cAomPIm, aloncdasl, olorcoavleor-rtohvee-ar-itrhe-air 900 MHz ISM FHSS 128-bit AES Retries/Acknowledgments PAN ID, channel, 64-bit address 8 hopping patterns on 12 channels or single channel VDC 210 mA 80 mA 60 uA 3.3V top view PIN 1 PIN 10 PIN 20 32.94mm PIN 11 22.00mm Yes No side views 0.51mm shield-to-PCB 0.79mm 2.79mm 2.03mm 1.27mm 4.06mm |
More datasheets: ATF1502AS-15JC44 | ATF1502AS-15AI44 | ATF1502ASL-25JI44 | M3288 SL005 | M3288 SL002 | M3288 SL001 | 3003 | PF21.3 | XBP09-DPUIT-156J | XBP09-DPWIT-156J |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived XBP09-DPSIT-156J Datasheet file may be downloaded here without warranties.