20-668-0024

20-668-0024 Datasheet

20-101-1186 20-668-0024

Part	Datasheet
20-668-0024	20-668-0024 (pdf)

PDF Datasheet Preview
4000 Low-EMI, High-Performance Microprocessor High-performance, low-EMI microprocessor designed specifically for embedded control, communications and Ethernet connectivity. Overview The Rabbit 4000 offers a host of industrial peripherals along with 1 MB of code support to meet the most demanding applications. The Rabbit 4000 offers on chip Ethernet which reduces overall component costs and optimizes communication performance. Its compact instruction set and high clock speeds give the Rabbit 4000 exceptionally fast math, logic and I/O performance. The Rabbit 4000 is programmed using the industry-proven Dynamic development system. Dynamic C is easy to use, allowing developers to write, compile and test both C and Assembly code without leaving the Dynamic C environment, and no costly in-circuit emulators are required. Full TCP/IP stack with source code is provided royalty-free. Complete Solutions Modules SBCs Development Kits Supported Software Platforms Application Highlight 10 Base-T Ethernet 60 MHz 8-bit Data Bus Spectrum Spreader Real-Time Clock Rabbit 4000 CPU AES Accelerator I/O Hub 24-bit Address 16-bit Data External Memory 32bytes of Battery Backed VRAM External I/O 8 Channel DMA Serial Ports E-F Async or HDLC Serial Ports A-D Async or SPI Slave Port Input Capture Quadrature Decoder PWM Parallel Ports A-F 40 I/O Features/Benefits • 60 MHz max clock speed • Integrated 10Base-T Ethernet • Supports 8-bit or 16-bit Flash and SRAM memories • Extended low-power “sleepy” modes • Watchdog timer • Battery backed option for protected data storage Specifications Feature Packaging Package Size Maximum Clock Speed Operating Voltage Ethernet DMA Operating Temperature Digital I/O Serial Ports Baud Rate Address Bus Data Bus Timers Real-Time Clock RTC Oscillator Circuitry Watchdog Timer/Supervisor Clock Modes Power Down Modes Auxiliary I/O Bus Pricing Part Number Sample 2-pack Part Number 4000 128-pin LQFP 16 x 16 x mm 60 MHz 1.8V Core 3.3V I/O or 1.8V Core and I/O Integrated 10Base-T Ethernet controller 8 independent channels with 2 external DMA request inputs -55° C to +85° C 40+ arranged in five 8-bit ports 6 CMOS-compatible Clock speed/8 max asynchronous 24-bit 8/16-bit Ten 8-bit, one 10-bit with two match registers, one 16-bit timer Yes, battery-backable External Yes 1x, 2x, /2, /3, /4, /6, /8 Sleepy 32 kHz Ultra-Sleepy 16, 8, 2 kHz 8 data, 8 address lines 20-101-1186 20-668-0024 You can purchase with knowing that Digi is always available to serve you with expert technical support and our industry leading warranty. For detailed information visit

PDF Datasheet Preview

4000

Low-EMI, High-Performance Microprocessor

High-performance, low-EMI microprocessor designed specifically for embedded control, communications and Ethernet connectivity.

Overview

The Rabbit 4000 offers a host of industrial peripherals along with 1 MB of code support to meet the most demanding applications. The Rabbit 4000 offers on chip Ethernet which reduces overall component costs and optimizes communication performance. Its compact instruction set and high clock speeds give the Rabbit 4000 exceptionally fast math, logic and I/O performance. The Rabbit 4000 is programmed using the industry-proven Dynamic development system. Dynamic C is easy to use, allowing developers to write, compile and test both C and Assembly code without leaving the Dynamic C environment, and no costly in-circuit emulators are required. Full TCP/IP stack with source code is provided royalty-free.

Complete Solutions

Modules

SBCs

Development Kits

Supported Software Platforms

Application Highlight
10 Base-T Ethernet
60 MHz 8-bit Data Bus

Spectrum Spreader

Real-Time Clock

Rabbit 4000 CPU

AES Accelerator

I/O Hub
24-bit Address 16-bit Data

External Memory 32bytes of

Battery Backed VRAM

External I/O
8 Channel DMA

Serial Ports E-F Async or HDLC Serial Ports A-D

Async or SPI Slave Port

Input Capture Quadrature Decoder PWM

Parallel Ports A-F 40 I/O

Features/Benefits
• 60 MHz max clock speed
• Integrated 10Base-T Ethernet
• Supports 8-bit or 16-bit Flash and SRAM memories
• Extended low-power “sleepy” modes
• Watchdog timer
• Battery backed option for protected data storage

Specifications

Feature Packaging Package Size Maximum Clock Speed Operating Voltage Ethernet DMA Operating Temperature Digital I/O Serial Ports Baud Rate Address Bus Data Bus Timers Real-Time Clock RTC Oscillator Circuitry Watchdog Timer/Supervisor Clock Modes Power Down Modes Auxiliary I/O Bus Pricing Part Number Sample 2-pack Part Number
4000
128-pin LQFP 16 x 16 x mm
60 MHz 1.8V Core 3.3V I/O or 1.8V Core and I/O

Integrated 10Base-T Ethernet controller 8 independent channels with 2 external DMA request inputs
-55° C to +85° C 40+ arranged in five 8-bit ports
6 CMOS-compatible Clock speed/8 max asynchronous
24-bit 8/16-bit Ten 8-bit, one 10-bit with two match registers, one 16-bit timer Yes, battery-backable External

Yes 1x, 2x, /2, /3, /4, /6, /8 Sleepy 32 kHz Ultra-Sleepy 16, 8, 2 kHz 8 data, 8 address lines
20-101-1186 20-668-0024

You can purchase with knowing that Digi is always available to serve you with expert technical support and our industry leading warranty. For detailed information visit

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 20-668-0024 Datasheet file may be downloaded here without warranties.

Datasheet ID: 20-668-0024 509661