BK60C-048L-025F40HN

BK60C-048L-025F40HN Datasheet

BK60C-40

Part	Datasheet
BK60C-048L-025F40HN	BK60C-048L-025F40HN (pdf)

Related Parts	Information
BK60C-048L-018F40H	BK60C-048L-018F40H
BK60C-048L-025F40H	BK60C-048L-025F40H
BK60C-048L-018F40HN	BK60C-048L-018F40HN
BK60C-048L-033F40H	BK60C-048L-033F40H
BK60C-048L-033F40HN	BK60C-048L-033F40HN

PDF Datasheet Preview
Astec Industry Standard 150 Watts BK60C-40 High Efficiency Total Power Input Voltages No. of Outputs: 150 Watts 48V Single Electrical Specs Input Input range Input Surge Efficiency 36-75 VDC 100V / 100ms 89% 3.3V typ Special Features • High efficiency, • -40°C to 100°C baseplate operating temperature no derating • Positive and Negative enable function • Low output ripple and noise • High capacitive load limit on start-up • Remote sense compensation • Regulation to zero load • Fixed frequency switching 300 kHz Output Load regulation Line regulation Ripple and noise Remote sense Output voltage adjust range Transient Response Overvoltage Protection Current Limit 10mV typical down to no load output below 5V 10mV typical outpt below 5V 200mV p-p max Up to 0.5V ±20% of nominal output 10% max deviation with 25% to 75% full load output 5V and above 200mV 130% nominal output 5V and above 160% nominal outpt 2.2V output 140% nominal output 3.3V output 115% maximum output Environmental Operating temperature baseplate -40°C to +100°C Storage temperature -55°C to +105°C Overtemperature protection 110°C typical MTBF >1 million hours Control Voltage Adjust Enable 90 to 110% TTL compatible positive & negative enable options Nominal values apply with sense pins connected and other control pins unconnected. Specifications subject to change without notice. Safety UL 1950 CAN22.2-950 TUV EN60950 America’s USA 1-888-41-ASTEC Europe UK 44 1384 842-211 Asia HK 852-2437-9662 BK60C-40 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone 44 1384 842-211 Facsimile 44 1384 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Ordering Information Input Voltage Output Voltage Efficiency Model Number 1.8V 40A 81% min BK60C-048L-018F40H 2.5V 40A 84% min BK60C-048L-025F40H 3.3V 40A 86% min BK60C-048L-033F40H NOTES Efficiency is measured at full load and Tc=70 Deg C "N" added to suffix = Negative Enable Omit suffix for positive enable default Pin Assignments Single Output -Vin Case Enable on/off +Vin -5V Rtn - Sense Trim + Sense +Out 20 mHz bandwidth. An external mf ceramic capacitor is recommended to be placed from +V out to -V out. Requires a mf, 100V film capacitor connected between +V in and -V in to meet FCC class A and ETS300-386-1 requirements for conducted noise. Consult Factory for filtering information to meet FCC class B, VDE or EIC specifications. All specifications are typical at nominal line, full load, and 25°C unless otherwise noted. All specifications subject to change without notice. Mechanical drawings are for reference only. Please refer to the Technical Reference Notes for more information. Warranty 1 yr MIN. NOTE 1 Mounting Inserts M3 X 4 places BOTTOM VIEW Case Material Metal base, plastic cover Weight Oz / 78 Grams Astec Industry Standard

PDF Datasheet Preview

Astec Industry Standard
150 Watts

BK60C-40

High Efficiency

Total Power Input Voltages No. of Outputs:
150 Watts 48V Single

Electrical Specs

Input

Input range Input Surge Efficiency
36-75 VDC 100V / 100ms 89% 3.3V typ

Special Features
• High efficiency,
• -40°C to 100°C baseplate operating
temperature no derating
• Positive and Negative enable function
• Low output ripple and noise
• High capacitive load limit on start-up
• Remote sense compensation
• Regulation to zero load
• Fixed frequency switching 300 kHz

Output

Load regulation Line regulation Ripple and noise Remote sense Output voltage adjust range Transient Response

Overvoltage Protection

Current Limit
10mV typical down to no load output below 5V 10mV typical outpt below 5V 200mV p-p max Up to 0.5V
±20% of nominal output 10% max deviation with 25% to 75% full load output 5V and above 200mV 130% nominal output 5V and above 160% nominal outpt 2.2V output 140% nominal output 3.3V output 115% maximum output

Environmental

Operating temperature baseplate -40°C to +100°C Storage temperature -55°C to +105°C Overtemperature protection 110°C typical MTBF >1 million hours

Control

Voltage Adjust Enable
90 to 110% TTL compatible positive & negative enable options

Nominal values apply with sense pins connected and other control pins unconnected.

Specifications subject to change without notice.

Safety

UL 1950

CAN22.2-950

TUV EN60950

America’s USA 1-888-41-ASTEC

Europe UK 44 1384 842-211 Asia HK 852-2437-9662

BK60C-40

AMERICAS
5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698

EUROPE

Astec House, Waterfront Business Park Merry Hill, Dudley

West Midlands, DY5 1LX, UK Telephone 44 1384 842-211 Facsimile 44 1384 843-355

ASIA

Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road

Fwai Fong, New Territories Hong Kong
Ordering Information

Input Voltage

Output Voltage

Efficiency

Model Number
1.8V 40A
81% min

BK60C-048L-018F40H
2.5V 40A
84% min

BK60C-048L-025F40H
3.3V 40A
86% min

BK60C-048L-033F40H

NOTES Efficiency is measured at full load and Tc=70 Deg C "N" added to suffix = Negative Enable Omit suffix for positive enable default

Pin Assignments

Single Output
-Vin Case Enable on/off +Vin -5V Rtn - Sense Trim + Sense +Out
20 mHz bandwidth. An external mf ceramic capacitor is recommended to be placed from +V out to -V out.

Requires a mf, 100V film capacitor connected between +V in and -V in to meet FCC class A and ETS300-386-1 requirements for conducted noise. Consult Factory for filtering information to meet FCC class B, VDE or EIC specifications.

All specifications are typical at nominal line, full load, and 25°C unless otherwise noted.

All specifications subject to change without notice. Mechanical drawings are for reference only.

Please refer to the Technical Reference Notes for more information. Warranty 1 yr

MIN.

NOTE 1

Mounting Inserts M3 X 4 places

BOTTOM VIEW

Case Material Metal base, plastic cover Weight Oz / 78 Grams

Astec Industry Standard

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BK60C-048L-025F40HN Datasheet file may be downloaded here without warranties.

Datasheet ID: BK60C-048L-025F40HN 511081