5973201402F

5973201402F Datasheet

RoHS COMPLIANT 597-3201-40XF Part Numbers with the "F" suffix ending are RoHS Compliant. For example 597-3201-402F Reel and bag packaging are marked with "RoHS Compliant" label or equivalent markings. These parts can be used with RoHS reflow profile. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec.

Part	Datasheet
5973201402F	5973201402F (pdf)

Related Parts	Information
5973201407F	5973201407F

PDF Datasheet Preview
LENS LED CHIP 1 CATHODE MARK 2 [1,5 #0,1] [2,01] [1,8] [0,89] DRN. CKD. APP. DATE NEW RELEASE HG 4-22-94 ADDED NOTES 6 AND TC D.C. N.O. 6-9-99 ADDED "F" SUFFIX RoHS COMPLIANT P/Ns -402F, -407F, TWC WITH RoHS REFLOW PROFILE ADDED DOMINANT WAVELENGTH SPECS, TOLERANCES, TAPE AND REEL SPEC, AJF KLJ NO 10-11-10 LED SCHEMATIC AND NOTE RoHS COMPLIANT 597-3201-40XF Part Numbers with the "F" suffix ending are RoHS Compliant. For example 597-3201-402F Reel and bag packaging are marked with "RoHS Compliant" label or equivalent markings. These parts can be used with RoHS reflow profile. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec. TIME - SECONDS OPERATING CHARACTERISTICS AT 25 AMBIENT LED CHARACTERISTICS MIN. TYP. MAX. UNITS TEST CONDITIONS [1,6] [1,3] [0,61] SEE NOTE 2 PIN 2 PIN 1 CATHODE LED SCHEMATIC NOTES DIE GaAsP/GaP ORANGE. [4,4 #0,05] [1,6 #0,05] [1,6 #0,05] RECOMMENDED SOLDER PAD LAYOUT [1,75 #0,1] CATHODE [4 #0,1] [1,8] LUMINOUS INTENSITY

PDF Datasheet Preview

LENS

LED CHIP
1 CATHODE MARK
2 [1,5 #0,1]
[2,01]
[1,8]
[0,89]

DRN. CKD. APP. DATE

NEW RELEASE

HG 4-22-94

ADDED NOTES 6 AND

TC D.C. N.O. 6-9-99

ADDED "F" SUFFIX RoHS

COMPLIANT P/Ns -402F, -407F, TWC

WITH RoHS REFLOW PROFILE

ADDED DOMINANT WAVELENGTH SPECS,

TOLERANCES, TAPE AND REEL SPEC, AJF KLJ NO 10-11-10

LED SCHEMATIC AND NOTE

RoHS COMPLIANT 597-3201-40XF Part Numbers with the "F" suffix ending are RoHS Compliant. For example 597-3201-402F Reel and bag packaging are marked with "RoHS Compliant" label or equivalent markings. These parts can be used with RoHS reflow profile. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec.

TIME - SECONDS

OPERATING CHARACTERISTICS AT 25 AMBIENT

LED CHARACTERISTICS

MIN. TYP. MAX.

UNITS TEST CONDITIONS
[1,6]
[1,3]
[0,61]

SEE NOTE 2

PIN 2

PIN 1 CATHODE

LED SCHEMATIC

NOTES DIE GaAsP/GaP ORANGE.
[4,4 #0,05]
[1,6 #0,05]
[1,6 #0,05]

RECOMMENDED SOLDER PAD LAYOUT
[1,75 #0,1]

CATHODE
[4 #0,1]
[1,8]

LUMINOUS INTENSITY

More datasheets: B41605A7388M002 | B41605A0278M002 | B41605A0368M002 | B41605A5688M002 | B41605A8158M002 | BUT11-S | SMP4-SBC-YG | 96RC-SAS-8P-PE-AD1 | 1803 | 5973201407F

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 5973201402F Datasheet file may be downloaded here without warranties.

Datasheet ID: 5973201402F 509384