SEN0171

SEN0171 Datasheet

PIR Motion Sensor V1.0 SKU:SEN0171

Part	Datasheet
SEN0171	SEN0171 (pdf)

PDF Datasheet Preview
PIR Motion Sensor V1.0 SKU:SEN0171 Contents • 1 Introduction • 2 Specification • 3 Application • 4 PinOut Diagram Overview of the Detector Output Characteristic • 5 Tutorial Connection Diagram Sample Code Result • 6 Trouble shooting Introduction Pyroelectric infrared motion sensor can detect the infrared signals from the person or animals which are moving, and can output the switching signals. So it can be applied to a variety of occasions which need to detect the movement of the human body. Conventional pyroelectric infrared sensors require body pyroelectric infrared detector, professional chip, complex peripheral circuit, so the volume is slightly big, circuit is complex, and reliability is slightly lower. Now we launch this new pyroelectric infrared motion sensor, especially designed for Arduino. An integrated digital body pyroelectric infrared sensor is used, with small size, high reliability, low power consumption, simple peripheral circuit. Specification • Input Voltage ~ 5V, 6V Maximum • Working Current 15uA • Working Temperature -20 ~ 85 • Output Voltage High 3V, low 0V • Output Delay Time High Level About to 3 Seconds • Detection angle 100 ° • Detection distance 7 meters • Output Indicator LED When output HIGH,it will be ON • Pin limit current 100mA • Connection Interface PH2.0-3 • Module size 30mm x 22mm Application • Intrusion Alarm • Non-contact infrared automatic switch PinOut Diagram Overview of the Detector The pyroelectric infrared motion sensor integrates a digital integrated body pyroelectric infrared detector whose model is AM412. This detector is a digital intelligent PIR sensor. It interfaces directly with up to two conventional PIR sensors via a high impedance differential input. The PIR signal is converted to a 15 bit digital value on chip. A LED indicates whenever the PIR signal is above the selected threshold. All signal processing is performed digitally. Output Characteristic When the pyroelectric infrared motion sensor detects the movement of the life body within the detection range, the output pin will output high level 3V and the output led is ON Without an infrared Pyroelectric signal, the output pin will output low level 0V and the output led is OFF. Pay attention Once the IR signal disappears, the output pin will output low level delay roughly seconds. So we can quickly establish a body motion detection application according to this feature. Note:When the sensor just on power, there will be unstable for a short time. The output level is jittered. Tutorial Connection Diagram Sample Code Just download the sample code. Move your body to play with the tiny motion sensor. // # // # Editor // # Date // # E-Mail Youyou from DFRobot : // # Product name PIR Motion Sensor // # Product SKU SEN0171 // # Version // # Description: // # The sketch for using the PIR Motion sensor with Arduino/Raspberry Pi con troller to achieve the human detection feature. // # Hardware Connection: PIR Sensor -> Digital pin 2 Indicator LED -> Digital pin 13 byte sensorPin = 2 byte indicator = 13; void setup pinMode sensorPin,INPUT pinMode indicator,OUTPUT Serial.begin 9600 ; void loop byte state = digitalRead sensorPin ; digitalWrite indicator,state if state == 1 Serial.println "Somebody is in this area!" else if state == 0 Serial.println "No one!" delay 500 ; Result When the sensor detects the living movement body within detection range, the output pin will output high voltage of 3V, while the output indicator is lighted.Otherwise,after 2~3s,the output pin will output high voltage of 0V, while the output indicator is extinguished. Note When the sensor just on electricity, there will be unstable for a short time, the output terminal will be level shake! Trouble shooting More question and cool idea,visit DFRobot Forum Powered By DFRobot 2008-2017

PDF Datasheet Preview

PIR Motion Sensor V1.0 SKU:SEN0171

Contents
• 1 Introduction
• 2 Specification
• 3 Application
• 4 PinOut

Diagram Overview of the Detector Output Characteristic
• 5 Tutorial Connection Diagram Sample Code Result
• 6 Trouble shooting

Introduction

Pyroelectric infrared motion sensor can detect the infrared signals from the person or animals which are moving, and can output the switching signals. So it can be applied to a variety of occasions which need to detect the movement of the human body. Conventional pyroelectric infrared sensors require body pyroelectric infrared detector, professional chip, complex peripheral circuit, so the volume is slightly big, circuit is complex, and reliability is slightly lower. Now we launch this new pyroelectric infrared motion sensor, especially designed for Arduino. An integrated digital body pyroelectric infrared sensor is used, with small size, high reliability, low power consumption, simple peripheral circuit.

Specification
• Input Voltage ~ 5V, 6V Maximum
• Working Current 15uA
• Working Temperature -20 ~ 85
• Output Voltage High 3V, low 0V
• Output Delay Time High Level About to 3 Seconds
• Detection angle 100 °
• Detection distance 7 meters
• Output Indicator LED When output HIGH,it will be ON
• Pin limit current 100mA
• Connection Interface PH2.0-3
• Module size 30mm x 22mm

Application
• Intrusion Alarm
• Non-contact infrared automatic switch

PinOut

Diagram

Overview of the Detector

The pyroelectric infrared motion sensor integrates a digital integrated body pyroelectric infrared detector whose model is AM412. This detector is a digital intelligent PIR sensor. It interfaces directly with up to two conventional PIR sensors via a high impedance differential input. The PIR signal is converted to a 15 bit digital value on chip. A LED indicates whenever the PIR signal is above the selected threshold. All signal processing is performed digitally.

Output Characteristic

When the pyroelectric infrared motion sensor detects the movement of the life body within the detection range, the output pin will output high level 3V and the output led is ON Without an infrared Pyroelectric signal, the output pin will output low level 0V and the output led is OFF. Pay attention Once the IR signal disappears, the output pin will output low level delay roughly seconds. So we can quickly establish a body motion detection application according to this feature. Note:When the sensor just on power, there will be unstable for a short time. The output level is jittered.

Tutorial

Connection Diagram

Sample Code

Just download the sample code. Move your body to play with the tiny motion sensor.
// # // # Editor // # Date // # E-Mail

Youyou from DFRobot :
// # Product name PIR Motion Sensor
// # Product SKU SEN0171
// # Version
// # Description:
// # The sketch for using the PIR Motion sensor with Arduino/Raspberry Pi con troller to achieve the human detection feature.
// # Hardware Connection:

PIR Sensor -> Digital pin 2

Indicator LED -> Digital pin 13
byte sensorPin = 2 byte indicator = 13;
void setup
pinMode sensorPin,INPUT pinMode indicator,OUTPUT Serial.begin 9600 ;
void loop
byte state = digitalRead sensorPin ;
digitalWrite indicator,state if state == 1 Serial.println "Somebody is in this area!" else if state == 0 Serial.println "No one!" delay 500 ;

Result

When the sensor detects the living movement body within detection range, the output pin will output high voltage of 3V, while the output indicator is lighted.Otherwise,after 2~3s,the output pin will output high voltage of 0V, while the output indicator is extinguished. Note When the sensor just on electricity, there will be unstable for a short time, the output terminal will be level shake!

Trouble shooting

More question and cool idea,visit DFRobot Forum

Powered By DFRobot 2008-2017

More datasheets: EAUVA35352GH7 | 88970454 | 88970452 | 88970449 | 88970448 | 88950105 | EPM9560RC240-15YY | AS7210 | 96FD25-S960-INB3 | 4362D1/5

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SEN0171 Datasheet file may be downloaded here without warranties.

Datasheet ID: SEN0171 509088