FIT0313

FIT0313 Datasheet

NFC Classic Sticker SKU:FIT0313

Part	Datasheet
FIT0313	FIT0313 (pdf)

PDF Datasheet Preview
NFC Classic Sticker SKU:FIT0313 INTRODUCTION NFC classic sticker 13.56MHz is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. This Mifare-One Sticker can be read by almost any 13.56MHz RFID/NFC reader or NFC-enabled mobile devices.These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 rewrites.Every sticker has a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed. The NXP TagWriter application will be helpful to format NDEF exchange protocol and easy to store the contacts, bookmarks, geo location, Bluetooth Handover, SMS, Mail, text messages and many more to NFC tags and stickers. • Contactless payment systems • Bluetooth and Wi-Fi connections • Social networking situations, such as sharing contacts, photos, videos or files • Electronic identity documents and keycards • Smartphone automation and NFC tags SPECIFICATION • Operating Frequency:13.56 MHz • Baud:106 kbs • EEPROM storage 1K Byte • 4 Byte unique identifier • Variable Identification distance:0~5cm 0~1.97" • Service life:>=10 years • Service time:100,000 re-writes • Size:4.0x2.5x0.2cm 1.57x0.98x0.08" SHIPPING LIST • NFC Classic sticker x1 Powered By DFRobot 2008-2017 4-27-17

PDF Datasheet Preview

NFC Classic Sticker SKU:FIT0313

INTRODUCTION

NFC classic sticker 13.56MHz is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. This Mifare-One Sticker can be read by almost any 13.56MHz RFID/NFC reader or NFC-enabled mobile devices.These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 rewrites.Every sticker has a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed. The NXP TagWriter application will be helpful to format NDEF exchange protocol and easy to store the contacts, bookmarks, geo location, Bluetooth Handover, SMS, Mail, text messages and many more to NFC tags and stickers.
• Contactless payment systems
• Bluetooth and Wi-Fi connections
• Social networking situations, such as sharing contacts, photos, videos or files
• Electronic identity documents and keycards
• Smartphone automation and NFC tags

SPECIFICATION
• Operating Frequency:13.56 MHz
• Baud:106 kbs
• EEPROM storage 1K Byte
• 4 Byte unique identifier
• Variable Identification distance:0~5cm 0~1.97"
• Service life:>=10 years
• Service time:100,000 re-writes
• Size:4.0x2.5x0.2cm 1.57x0.98x0.08"

SHIPPING LIST
• NFC Classic sticker x1

Powered By DFRobot 2008-2017 4-27-17

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FIT0313 Datasheet file may be downloaded here without warranties.

Datasheet ID: FIT0313 508916