HLMA-SH05

HLMA-SH05 Datasheet

HLMA-SH05 2 mm x 5 mm Rectangular AlInGaP Lamps

Part	Datasheet
HLMA-SH05	HLMA-SH05 (pdf)

PDF Datasheet Preview
HLMA-SH05 2 mm x 5 mm Rectangular AlInGaP Lamps Data Sheet The HLMA-SH05 is an epoxy encapsulated lamp in rectangular package which are easily stacked in arrays or used for discrete front panel Contrast and light uniformity are enhanced by a special epoxy diffusion and tinting process. Technology This 2x5 rectangular solid state lamp utilizes the newly developed Aluminum Indium Gallium Phosphide AlInGaP LED technology. This material has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. Device Selection Guide Package Description Rectangular, 2mm x 5 mm, Tinted, Diffused Viewing Angle 2q1/2 Dominant Wavelength 615 nm • Rectangular light emitting surface • Excellent for flush mounting on panels • Long life solid state reliability • Excellent uniformity of light output Package Dimensions CATHODE LEAD MIN. NOMINAL SIDE VIEW SQ. NOMINAL NOMINAL BOTTOM VIEW NOTES ALL DIMENSIONS ARE IN MILLIMETERS INCHES . AN EPOXY MENISCUS MAY EXTEND ABOUT 1 mm DOWN THE LEADS. THERE IS A MAXIMUM 1° TAPER FROM BASE TO THE TOP OF LAMP. HLMA-SXD5 pkg dimen Absolute Maximum Ratings DC Forward Current[1] 50 mA Peak Forward Current[2] 200 mA Average Forward Current at IPEAK = 200 mA, f 1 KHz [2] Transient Forward Current[3] 10 us Pulse 45 mA 500 mA LED Junction Temperature 110°C Operating Temperature Range -40 to +100°C Storage Temperature Range -40 to +100°C Wave Soldering Temperature mm in] below Body 250°C for 3 seconds Solder Dipping Temperature mm in] below Body

PDF Datasheet Preview

HLMA-SH05 2 mm x 5 mm Rectangular AlInGaP Lamps

Data Sheet

The HLMA-SH05 is an epoxy encapsulated lamp in rectangular package which are easily stacked in arrays or used for discrete front panel Contrast and light uniformity are enhanced by a special epoxy diffusion and tinting process.

Technology

This 2x5 rectangular solid state lamp utilizes the newly developed Aluminum Indium Gallium Phosphide AlInGaP LED technology. This material has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents.

Device Selection Guide

Package Description

Rectangular, 2mm x 5 mm, Tinted, Diffused

Viewing Angle 2q1/2

Dominant Wavelength
615 nm
• Rectangular light emitting surface
• Excellent for flush mounting on panels
• Long life solid state reliability
• Excellent uniformity of light output

Package Dimensions

CATHODE LEAD

MIN.

NOMINAL

SIDE VIEW

SQ. NOMINAL

NOMINAL

BOTTOM VIEW

NOTES ALL DIMENSIONS ARE IN MILLIMETERS INCHES . AN EPOXY MENISCUS MAY EXTEND ABOUT
1 mm DOWN THE LEADS. THERE IS A MAXIMUM 1° TAPER FROM

BASE TO THE TOP OF LAMP.

HLMA-SXD5 pkg dimen

Absolute Maximum Ratings

DC Forward Current[1]
50 mA

Peak Forward Current[2]
200 mA

Average Forward Current at IPEAK = 200 mA, f 1 KHz [2]

Transient Forward Current[3] 10 us Pulse
45 mA 500 mA

LED Junction Temperature
110°C

Operating Temperature Range
-40 to +100°C

Storage Temperature Range
-40 to +100°C

Wave Soldering Temperature mm in] below Body
250°C for 3 seconds

Solder Dipping Temperature mm in] below Body

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HLMA-SH05 Datasheet file may be downloaded here without warranties.

Datasheet ID: HLMA-SH05 520327