DFR0491

DFR0491 Datasheet


SKU:DFR0491

Part Datasheet
DFR0491 DFR0491 DFR0491 (pdf)
PDF Datasheet Preview
Gravity IO Expansion Shield for LattePanda

SKU:DFR0491

INTRODUCTION

This Gravity I/O expansion shield, which is made for LattePanda, breakouts all GPIO pins to make it compatible with standard Arduino device and no interruption with other ports on LattePanda. Each pin has VCC and GND power port, compatible with Gravity-3Pin Color coded interface, supports hundreds of sensors and modules.

Gravity IO Expansion Shield for LattePanda Pinout And this shield also adds a new power solution for LattePanda. You can use a 7~12V wide range power supply to power the board and devices via DC or DC terminal port, maximum 5A under 5V IO output All make the shield prefect for using LattePanda to learning and developing.

LattePanda with Gravity IO Expansion Shield Note The two power terminals are connected to each other. Do not connect external power at the same time When using 7 ~ 12V external power supply, do not repeat power LattePanda via USB

SPECIFICATION
• LattePanda Compatible
• Arduino Leonardo Compatible
• Gravity sensor Compatible
• Input Voltage 7~12V
• Input interface DC 2-pin wire.
• Digital Gravity interface x14
• Analog Gravity interface x6
• IIC port x2
• ICSP port x1
• Output Voltage 5V
• I/O Operating Voltage 5V
• 5V Port Maximum Output Current 5A
• 3.3V Port Maximum Output Current 1A
• 8x8 general 2.54mm prototype pad
• Dimension 70mm x 68mm / 2.76in x 2.68in

SHIPPING LIST

Gravity IO Expansion Shield for LattePanda x1
More datasheets: 26800B-444 | 19-226/R6G7C-A01/2T | B39311R884H210 | 573SURD/S530-A3 | 1606 | WB-RS485-24LP-A | 74ALVC162839TX | 74ALVC162839T | WM8750CLSEFL/R | WM8750CLSEFL


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0491 Datasheet file may be downloaded here without warranties.

Datasheet ID: DFR0491 508799