DFR0477

DFR0477 Datasheet

SKU:DFR0477

Part	Datasheet
DFR0477	DFR0477 (pdf)

PDF Datasheet Preview
Realtek Ameba-RTL8195AM WiFi & NFC Module SKU:DFR0477 INTRODUCTION Ameba-RTL8195AM is an IoT Internet of things microcontroller developed by Realtek. It combines an ARM-Cortex M3 MCU, Wi-Fi and NFC Near Field Communication in a single chip. It provides high speed connectivity interface, such as USB host, USB device, SDMMC HS, SDIO device and MII/RMMII interfaces. It also provides a bunch of configurable GPIOs which are configured as digital peripherals for different applications and control usage. Moreover, the chip also has SPI, I2C, UART serial communication interfaces, and ADC & DAC analog interfaces. Realtek, as one of the biggest suppliers of Wi-Fi solution, its Ameba-RTL8195AM offers trustworthy stability and reliability. Ameba-RTL8195AM, the first low power consuming IoT chip integrates Ethernet and NFC. It is a cheap and reliable choice for IoT developers. Caution RTL8195AM is developer-oriented and some functions are still in testing. Please check the official website for more details. • Support for Arduino and Micropython programing • Supports b/g/n 1x1 Wi-Fi • Supports NFC read/write • 10/100 Ethernet MII/ RMII/RGMII interface • Supports USB OTG • Supports SDIO device/SD card controller • Hardware SSL engine • 30 x GPIO Maximum • Supports 2 x SPI master-slave interface communication • Supports 3 x UART interface 2x HS-UART & 1x log UART • Supports 2 x I2C master-slave interface communication • Supports 2 x I2S/PCM master-slave interface communication • Supports 4 x PWM • Supports 2 x ADC • Supports 1 x DAC • Supports ultra-low power consumption • Fast response up to 400KHz SPECIFICATION • Operating Voltage 3.0V~3.3V • Micro-Controller 32-bit ARM Cortex • Antenna Connector U.FL • ROM/RAM/Flash 1MB SRAM • Wireless Network Mode station / softAP/ SoftAP+station • Data rate 802.11g 54Mbps Max. , 802.11n 150Mbps Max. • Operating Temperature range • Dimensions 19 x 24mm/0.75 x 0.94 inches SHIPPING LIST Realtek Ameba-RTL8195AM WiFi & NFC Module x1 8-15-17

PDF Datasheet Preview

Realtek Ameba-RTL8195AM WiFi & NFC Module

SKU:DFR0477

INTRODUCTION

Ameba-RTL8195AM is an IoT Internet of things microcontroller developed by Realtek. It combines an ARM-Cortex M3 MCU, Wi-Fi and NFC Near Field Communication in a single chip. It provides high speed connectivity interface, such as USB host, USB device, SDMMC HS, SDIO device and MII/RMMII interfaces. It also provides a bunch of configurable GPIOs which are configured as digital peripherals for different applications and control usage. Moreover, the chip also has SPI, I2C, UART serial communication interfaces, and ADC & DAC analog interfaces. Realtek, as one of the biggest suppliers of Wi-Fi solution, its Ameba-RTL8195AM offers trustworthy stability and reliability. Ameba-RTL8195AM, the first low power consuming IoT chip integrates Ethernet and NFC. It is a cheap and reliable choice for IoT developers.

Caution RTL8195AM is developer-oriented and some functions are still in testing. Please check the official website for more details.
• Support for Arduino and Micropython programing
• Supports b/g/n 1x1 Wi-Fi
• Supports NFC read/write
• 10/100 Ethernet MII/ RMII/RGMII interface
• Supports USB OTG
• Supports SDIO device/SD card controller
• Hardware SSL engine
• 30 x GPIO Maximum
• Supports 2 x SPI master-slave interface communication
• Supports 3 x UART interface 2x HS-UART & 1x log UART
• Supports 2 x I2C master-slave interface communication
• Supports 2 x I2S/PCM master-slave interface communication
• Supports 4 x PWM
• Supports 2 x ADC
• Supports 1 x DAC
• Supports ultra-low power consumption
• Fast response up to 400KHz

SPECIFICATION
• Operating Voltage 3.0V~3.3V
• Micro-Controller 32-bit ARM Cortex
• Antenna Connector U.FL
• ROM/RAM/Flash 1MB SRAM
• Wireless Network Mode station / softAP/ SoftAP+station
• Data rate 802.11g 54Mbps Max. , 802.11n 150Mbps Max.
• Operating Temperature range
• Dimensions 19 x 24mm/0.75 x 0.94 inches

SHIPPING LIST

Realtek Ameba-RTL8195AM WiFi & NFC Module x1
8-15-17

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0477 Datasheet file may be downloaded here without warranties.

Datasheet ID: DFR0477 508788