DFR0449

DFR0449 Datasheet


Expansion Shield x400 for Raspberry Pi B+/2B/3B SKU:DFR0449

Part Datasheet
DFR0449 DFR0449 DFR0449 (pdf)
PDF Datasheet Preview
Expansion Shield x400 for Raspberry Pi B+/2B/3B SKU:DFR0449

INTRODUCTION

The X400 Expansion Shield is a highly cost-effective audio hat which fits on the GPIO of the Raspberry Pi Model B+, Raspberry Pi 2 Model B and Raspberry Pi 3 Model B. It uses i2S interface audio solution and supports 24-bit /192KHz high quality sound. It is compatible with other audio equipment via RCA lotus socket. It includes a built-in high fidelity headphone amplifier, where you can plug in a 3.5mm audio jack directly. The shield has two digital amplifier output ports, up to 2 x30w speakers can be directly connected. Use this hat to make your Raspberry Pi in to a lossless audio player or a network radio. We recommend using an OS image such as Volumio, RuneAudio, PiMusicBox etc.

Note Raspberry Pi is not included in the box.

SPECIFICATION
• Input Voltage o 6V to 24V DC converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
• Audio o Full-HD audio o up to 24-bit/192kHz playback o Class leading audio 112db SNR, and THD of o Audiophile TI Burr Brown 32-bit/384kHz DAC TI PCM5122 o Uses the digital I2S audio signals to reduce CPU load over USB audio solutions o Integrated hardware volume control - Mute can be enabled / disabled via jumper o Built in High quality audio headphone amplifier TI TPA6133A o Earphone AMP can be enabled / disabled via jumper o Built in high quality Class-D stereo audio amplifier TI TPA3118D2 o Up to 2 x 20W into 4 ohm o AMP can be enabled/disabled via jumper o Phono/RCA connectors o 3.5mm stereo audio jack o Speaker terminals
• Wireless o Built in IR sensor 38KHz
• Misc o Power output socket o DIP switch to remove connection from RPi’s pin header o Directly connected on top of the Raspberry Pi using the board GPIO header pins o No wiring or soldering is required o Pin mappings identical to 40-pin header of the R-Pi in order to support existing expansion boards o Suitable for Raspberry Pi Model B+, 2 Model B and 3 Model B
• Dimensions o 85 x 56mm Same footprint as Raspberry Pi

SHIPPING LIST
• X400 Expansion Board x1
• Nylon Spacers M3 x 20mm x4
• Nylon Screws M3 x 6mm x8
• Jumper Wires x2

Powered By DFRobot 2008-2017 5-2-17
More datasheets: PEX8608BA-AIC4U1DRDK | PEX8608-BA50BC G | 74ALVC16821MTDX | 74ALVC16821MTD | HMC542ALP4E | SEN0097 | 50745370937670F | ALM-42216-TR1G | ALM-42216-TR2G | ALM-42216-BLKG


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0449 Datasheet file may be downloaded here without warranties.

Datasheet ID: DFR0449 508774