DFR0428

DFR0428 Datasheet

inches TFT Touchscreen for Raspberry Pi SKU DFR0428

Part	Datasheet
DFR0428	DFR0428 (pdf)

PDF Datasheet Preview
inches TFT Touchscreen for Raspberry Pi SKU DFR0428 TFT Touchscreen for Raspberry Pi Contents • 1 Introduction • 2 Technical Specifications • 3 Pin Descriptions • 4 Using the LCD with your Raspberry Pi Get Started Restore Output to HDMI Introduction Looking for a small screen that is the same size as your Raspberry Pi? This resistive touch screen with 480 x 320 resolution will certainly meet your needs. If further combined with a wireless keyboard, It will act as a fully functional computer that fits right in your pocket. Use it to run the Pi's terminal, to play games, or to browse the web. This item is more than just a screen, it is also a development friendly platform. It is seamlessly compatible with DFRobot Gravity series modules making it easy to connect or even to debug your Pi via the serial port! All the pins of Pi are left unoccupied, giving you more room to connect jumper wires. This Touchscreen is well designed for the Raspberry Pi 3, 2 or Model B+ with 40 GPIO Pins . Please note that it is not directly compatible with the old 26 pin GPIO Raspberry Pi. Supports Raspian and Ubuntu systems, compatible with Raspberry Pi B+, Raspberry Pi 2 and the latest Raspberry Pi any version with 40 GPIO pins Technical Specifications • Operating Voltage 5V • Screen resolution 480 x 320 • Interface SPI • GPIO Header Pins 16 • UART Header Pins 1 • Gravity I2C Pins 1 • Gravity UART Pins 1 • Gravity GPIO Pins 1 • Dimensions 86 x 56 mm / x • Weight 70g Pin Descriptions Raspberry Pi Pin Diagram Rear View Display Raspberry Pi Pin "GPIO 2" corresponds to the LCD digital pins "2" Using the LCD with your Raspberry Pi Get Started Download LCD drivers LCD-show-160811.tar.gz • Copy LCD driver onto the USB disk. • Insert the USB disk into the USB host on your Raspberry Pi • Copy the LCD drivers into the Pi's filesystem, e.g /home/pi • Open a terminal and use the cd command to navigate to the directory where the driver is e.g. if the directory is "/home/pi" then you need to use the command "cd /home/pi" • Unzip LCD-show.tar.gz tar -xvf LCD-show.tar.gz • Enter the LCD-show directory cd /home/pi/LCD-show • Install driver suo ./LCD35-show After you run the command, the system will automatically restart and switch to the LCD display. Restore Output to HDMI cd /home/pi/LCD-show/ sudo ./LCD-hdmi Note When using the LCD display driver be sure to power off the system using software rather than switching the power off abruptly to avoid damage to the LCD. Powered By DFRobot 2008-2017

PDF Datasheet Preview

inches TFT Touchscreen for Raspberry Pi SKU DFR0428

TFT Touchscreen for Raspberry Pi

Contents
• 1 Introduction
• 2 Technical Specifications
• 3 Pin Descriptions
• 4 Using the LCD with your Raspberry Pi

Get Started Restore Output to HDMI

Introduction

Looking for a small screen that is the same size as your Raspberry Pi? This resistive touch screen with 480 x 320 resolution will certainly meet your needs. If further combined with a wireless keyboard, It will act as a fully functional computer that fits right in your pocket. Use it to run the Pi's terminal, to play games, or to browse the web. This item is more than just a screen, it is also a development friendly platform. It is seamlessly compatible with DFRobot Gravity series modules making it easy to connect or even to debug your Pi via the serial port! All the pins of Pi are left unoccupied, giving you more room to connect jumper wires. This Touchscreen is well designed for the Raspberry Pi 3, 2 or Model B+ with 40 GPIO Pins . Please note that it is not directly compatible with the old 26 pin GPIO Raspberry Pi. Supports Raspian and Ubuntu systems, compatible with Raspberry Pi B+, Raspberry Pi 2 and the latest Raspberry Pi any version with 40 GPIO pins

Technical Specifications
• Operating Voltage 5V
• Screen resolution 480 x 320
• Interface SPI
• GPIO Header Pins 16
• UART Header Pins 1
• Gravity I2C Pins 1
• Gravity UART Pins 1
• Gravity GPIO Pins 1
• Dimensions 86 x 56 mm / x
• Weight 70g

Pin Descriptions

Raspberry Pi Pin Diagram

Rear View Display

Raspberry Pi Pin "GPIO 2" corresponds to the LCD digital pins "2"

Using the LCD with your Raspberry Pi

Get Started

Download LCD drivers LCD-show-160811.tar.gz
• Copy LCD driver onto the USB disk.
• Insert the USB disk into the USB host on your Raspberry Pi
• Copy the LCD drivers into the Pi's filesystem, e.g /home/pi
• Open a terminal and use the cd command to navigate to the directory where the driver is e.g. if the directory is "/home/pi" then you need to use the command "cd /home/pi"
• Unzip LCD-show.tar.gz tar -xvf LCD-show.tar.gz
• Enter the LCD-show directory cd /home/pi/LCD-show
• Install driver suo ./LCD35-show

After you run the command, the system will automatically restart and switch to the LCD display.

Restore Output to HDMI
cd /home/pi/LCD-show/ sudo ./LCD-hdmi Note When using the LCD display driver be sure to power off the system using software rather than switching the power off abruptly to avoid damage to the LCD.

Powered By DFRobot 2008-2017

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0428 Datasheet file may be downloaded here without warranties.

Datasheet ID: DFR0428 508763