DFR0358

DFR0358 Datasheet


Expansion Shield X300 for Raspberry Pi B+/2B/3B SKU:DFR0358

Part Datasheet
DFR0358 DFR0358 DFR0358 (pdf)
PDF Datasheet Preview
Expansion Shield X300 for Raspberry Pi B+/2B/3B SKU:DFR0358

INTRODUCTION

Expansion Shield X300 is a one of the most cost-effective shield which could apply to Raspberry Pi Model B+, Raspberry Pi 2 Model B and newest Raspberry Pi 3 Model B. It integrates a lot of very useful functions such as RTC real time clock audio input and output USB hub Bluletooth, WIFI SATA interface. With this shield, you can build Raspberry Pi projects more easily and save both time and cost. Compare with Expansion Shield X200. It adds some new features like SATA and BLuetooth, but it cancels HDMI and VGA video port. It is more suitable for project.
• Input Voltage 6V to 18Vdc converted to 5V, 4A via step-down DC/DC converter to power the Raspberry Pi
• SATA Allows you to connect SATA devices to your Raspberry Pi
• Audio:
1> 3.5mm MIC in jack 2> 3.5mm stereo audio jack 3> SPDIF output 4> Audio IO connector Microphone input and stereo audio amplifier 3.3Wx2
• Wireless:
1> WiFi IEEE 802.11b/g/n with external antenna 2> IR sensor 38KHz 3> Bluetooth serial communication
• USB Storage Self-powered USB hub with 3 ports
• Real-time clock RTC Based on DS3231SN with included CR2032 battery
• Misc:
1> Power output socket 2> Camera flex slot so camera can still be used with the expansion board attached 3> DIP switch to remove connection from RPi’s pin header 4> Directly connected on top of the Raspberry Pi using the board GPIO header pins 5> No wiring nor soldering is required 6> Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards 7> Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B Dimensions 85 x 56mm Same size as Raspberry Pi
• Note When you power Raspberry Pi with the shield power resource, please don't power it again via the Micro-USB port, it will
damage the board!

SHIPPING LIST
• X300 Raspberry Pi expansion board x1
• USB adapter
• 2.4GHz WIFI antenna x1
• nylon spacers M3 x 20mm x4
• nylon screws M3 x 6mm x8

Powered By DFRobot 2008-2017
More datasheets: 4366C3 | 794 | RF1404D | DK-DEV-10M50-A | AT49BV160DT-70CU-T | AT49BV160D-70TU-T | AT49BV160DT-70TU-T | AT49BV160D-70TU | AT49BV160DT-70CU | AT49BV160DT-70TU


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0358 Datasheet file may be downloaded here without warranties.

Datasheet ID: DFR0358 508737