DFR0216

DFR0216 Datasheet


DFRduino UNO R3 - Arduino Compatible

Part Datasheet
DFR0216 DFR0216 DFR0216 (pdf)
PDF Datasheet Preview
DFRduino UNO R3 - Arduino Compatible

SKU:DFR0216

INTRODUCTION

DFRduino Uno V3.0 from DFRobot is a physical world computing board of small size for academics or development It is a simple microcontroller board fully compatible with Arduino UNO R3 and Arduino IDE open-source development environment. This environment implements the Processing / Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer e.g. Flash, Processing, MaxMSP . The open-source IDE can be downloaded for free currently for Mac OS X, Windows, and Linux . This board features the ATmega16U2 programmed as a USB-to-serial converter. An added bonus is that our DFRduino is still using the DIP package AVR Chip. You could remove it to update or reprogram the chip's firmware, or even to place it on a finished, more compact project. The cool thing about our new DFRduino microcontroller is that the headers use different colors to feature I/O ports of different types:
• Red for Power Section.
• Blue for Analog I/O.
• Green for Digital I/O.

These colors match our sensor cables. This makes it really easy to figure out where to connect sensors, or to identify which side is Analog blue or Digital green .

The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins of which 6 can be used as PWM outputs , 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

This board added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.

SPECIFICATION
• Microcontroller ATmega328 DIP Package
• Operating Voltage 5V
• Input Voltage recommended 7 ~ 12V
• Input Voltage limits 6 ~ 20V
• Digital I/O Pins 14 of which 6 provide PWM output
• Analog Input Pins 6
• DC Current per I/O Pin 40 mA
• DC Current for 3.3V Pin 50 mA
• Flash Memory 32 KB of which 2KB used by bootloader
• SRAM 2 KB ATmega328
• EEPROM 1 KB ATmega328
• Clock Speed 16 MHz
• Size 75 x54 x15 mm x2.13 x0.59"
• Envionment Friendly Rohs Compliance

SHIPPING LIST
• DFRduino Uno V3.0 x1

Powered By DFRobot 2008-2017
More datasheets: CTL-A5B3-622.08TS | CTL-A5B3-155.52TS | 33UBAR-04SW11 | APSDM016GL2AN-ATMG | APSDM064GL2AN-ATMG | APSDM032GL2AN-ATMG | CY2CC910OXI-1 | CY2CC910OXI-1T | CY2CC910OXC | CY2CC910OXCT


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0216 Datasheet file may be downloaded here without warranties.

Datasheet ID: DFR0216 508671