CY2CC910OXCT

CY2CC910OXCT Datasheet

CY2CC910

Part	Datasheet
CY2CC910OXCT	CY2CC910OXCT (pdf)

Related Parts	Information
CY2CC910OXI-1	CY2CC910OXI-1
CY2CC910OXI-1T	CY2CC910OXI-1T
CY2CC910OXC	CY2CC910OXC

PDF Datasheet Preview
CY2CC910 1:10 Clock Fanout Buffer • Low voltage operation • Full range support: 3.3V 2.5V 1.8V • Over voltage tolerant input hot swappable • 1:10 Fanout • Drives either a 50-Ohm or 75-Ohm load • Low input capacitance • Low output skew • Low propagation delay • Typical tpd less than 4 ns • High speed operation 200 MHz at1.8V 650 MHz at 2.5V and 3.3V • Industrial versions available • Available in SSOP package Logic Block Diagram 4,8 15,20 IN 1 INPUT AVCMOS 2,6,10 13,17 The Cypress series of network circuits are produced using advanced micron CMOS technology, achieving the industry’s fastest logic and buffers. The Cypress CY2CC910 fanout buffer features one input and 10 outputs. It is ideal for conversion from and to 3.3V, 2.5V, and 1.8V Designed for Data Communications clock management applications, the large fanout from a single input reduces loading on the input clock. Cypress employs the unique AVCMOS type outputs VOI Variable Output Impedance that dynamically adjust for variable impedance matching, eliminate the need for series damping resistors, and reduce overall noise. OUTPUT AVCMOS • San Jose, CA 95134-1709 • 408-943-2600 [+] Feedback CY2CC910 Pin Configuration Figure 20-Pin SOIP-SSOP GND 2 Q1 3 VDD 4 Q2 5 GND 6 Q3 7 VDD 8 Q4 9 GND 10 CY2CC910 20 VDD 19 Q10 18 Q9 17 GND 16 Q8 15 VDD 14 Q7 13 GND 12 Q6 11 Q5 20 pin SOIC/SSOP Pin Description Pin Number 1 2,6,10,13,17 4,8,15,20 3,5,7,9,11,12,14,16,18,19 Pin Name IN GND VDD Q1,Q2,Q3,Q4,Q5,Q6,Q7,Q8,Q9,Q10 Description Input Ground Power Supply Output Maximum Ratings[1] Storage Temperature to +150°C Ambient Temperature to +85°C Supply Voltage to Ground Potential VCC to 4.6V to 5.8V Supply Voltage to Ground Potential Outputs only to VDD + 1V DC Output to VDD + 1V Power 0.75W Note Stresses greater than those listed under absolute maximum ratings may cause permanent damage to the device. This is intended to be a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operation sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Page 2 of 10 [+] Feedback CY2CC910 Variable Output Impedance Control VOI Figure Output Voltage versus Output Current TA = 25°C Ordering Information Part Number[7] Package Type Pb-free CY2CC910OXI 20-pin SSOP CY2CC910OXIT 20-pin and Reel CY2CC910OXC 20-pin SSOP CY2CC910OXCT 20-pin and Reel CY2CC910OXI-1 20-pin SSOP CY2CC910OXI-1T 20-pin and Reel Product Flow Industrial, to 85°C Industrial, to 85°C Commercial, 0°C to 70°C Commercial, 0°C to 70°C Industrial, to 85°C Industrial, to 85°C Status Active Note Devices with part numbers ending with -1 are identical to devices without the -1 suffix. There are no differences in specification. Page 8 of 10 [+] Feedback CY2CC910 Package Drawing Figure 20-Pin Shrunk Small Outline Package O20 DIA. PIN 1 ID. DIMENSIONS IN MILLIMETERS MIN. MAX. SEATING PLANE BSC. MIN. GAUGE PLANE 4° REF. 51-85077 *D Page 9 of 10 [+] Feedback CY2CC910 Document History Page Document Title CY2CC910 1:10 Clock Fanout Buffer Document No 38-07348 ECN NO. Orig. of Submission Change 2595534 CXQ/PYRS 10/23/08 Added “Status” column to Ordering Information table Updated Package Diagram 51-85024 Updated template 2896073 03/19/10 Updated package diagram Removed obsolete parts from ordering information table and added CY2CC910OXI-1, CY2CC910OXI-1T Removed reference to SOIC packages Sales, Solutions, and Legal Information Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations. Products Automotive Clocks & Buffers Interface Lighting & Power Control Memory Optical & Image Sensing PSoC Touch Sensing cypress.com/go/automotive cypress.com/go/clocks cypress.com/go/interface cypress.com/go/powerpsoc cypress.com/go/plc cypress.com/go/memory cypress.com/go/image cypress.com/go/psoc cypress.com/go/touch USB Controllers Wireless/RF cypress.com/go/USB cypress.com/go/wireless PSoC Solutions psoc.cypress.com/solutions PSoC 1 \| PSoC 3 \| PSoC 5 Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. All products and company names mentioned in this document may be trademarks of their respective holders. Page 10 of 10 [+] Feedback

PDF Datasheet Preview

CY2CC910
1:10 Clock Fanout Buffer
• Low voltage operation
• Full range support:
3.3V 2.5V 1.8V
• Over voltage tolerant input hot swappable
• 1:10 Fanout
• Drives either a 50-Ohm or 75-Ohm load
• Low input capacitance
• Low output skew
• Low propagation delay
• Typical tpd less than 4 ns
• High speed operation 200 MHz at1.8V 650 MHz at 2.5V and 3.3V
• Industrial versions available
• Available in SSOP package

Logic Block Diagram
4,8 15,20

IN 1 INPUT AVCMOS
2,6,10 13,17

The Cypress series of network circuits are produced using advanced micron CMOS technology, achieving the industry’s fastest logic and buffers.

The Cypress CY2CC910 fanout buffer features one input and 10 outputs. It is ideal for conversion from and to 3.3V, 2.5V, and 1.8V

Designed for Data Communications clock management applications, the large fanout from a single input reduces loading on the input clock.

Cypress employs the unique AVCMOS type outputs VOI Variable Output Impedance that dynamically adjust for variable impedance matching, eliminate the need for series damping resistors, and reduce overall noise.

OUTPUT AVCMOS
• San Jose, CA 95134-1709
• 408-943-2600
[+] Feedback

CY2CC910

Pin Configuration

Figure 20-Pin SOIP-SSOP

GND 2

Q1 3 VDD 4

Q2 5 GND 6

Q3 7 VDD 8

Q4 9 GND 10

CY2CC910
20 VDD 19 Q10 18 Q9 17 GND 16 Q8 15 VDD 14 Q7 13 GND 12 Q6 11 Q5
20 pin SOIC/SSOP

Pin Description

Pin Number 1 2,6,10,13,17 4,8,15,20 3,5,7,9,11,12,14,16,18,19

Pin Name IN GND VDD Q1,Q2,Q3,Q4,Q5,Q6,Q7,Q8,Q9,Q10

Description Input Ground Power Supply Output

Maximum Ratings[1]

Storage Temperature to +150°C Ambient Temperature to +85°C Supply Voltage to Ground Potential VCC to 4.6V to 5.8V

Supply Voltage to Ground Potential

Outputs only to VDD + 1V DC Output to VDD + 1V Power 0.75W

Note

Stresses greater than those listed under absolute maximum ratings may cause permanent damage to the device. This is intended to be a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operation sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

Page 2 of 10
[+] Feedback

CY2CC910

Variable Output Impedance Control VOI

Figure Output Voltage versus Output Current TA = 25°C
Ordering Information

Part Number[7]

Package Type

Pb-free

CY2CC910OXI
20-pin SSOP

CY2CC910OXIT
20-pin and Reel

CY2CC910OXC
20-pin SSOP

CY2CC910OXCT
20-pin and Reel

CY2CC910OXI-1
20-pin SSOP

CY2CC910OXI-1T
20-pin and Reel

Product Flow

Industrial, to 85°C Industrial, to 85°C Commercial, 0°C to 70°C Commercial, 0°C to 70°C Industrial, to 85°C Industrial, to 85°C

Status

Active

Note Devices with part numbers ending with -1 are identical to devices without the -1 suffix. There are no differences in specification.

Page 8 of 10 [+] Feedback

CY2CC910

Package Drawing

Figure 20-Pin Shrunk Small Outline Package O20

DIA.

PIN 1 ID.

DIMENSIONS IN MILLIMETERS MIN. MAX.

SEATING PLANE

BSC.

MIN.

GAUGE PLANE
4° REF.
51-85077 *D

Page 9 of 10 [+] Feedback

CY2CC910

Document History Page

Document Title CY2CC910 1:10 Clock Fanout Buffer Document No 38-07348

ECN NO.

Orig. of Submission

Change
2595534 CXQ/PYRS 10/23/08 Added “Status” column to Ordering Information table

Updated Package Diagram 51-85024

Updated template
2896073
03/19/10 Updated package diagram
Removed obsolete parts from ordering information table and added

CY2CC910OXI-1, CY2CC910OXI-1T

Removed reference to SOIC packages

Sales, Solutions, and Legal Information

Worldwide Sales and Design Support

Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations.

Products Automotive Clocks & Buffers Interface Lighting & Power Control

Memory Optical & Image Sensing PSoC Touch Sensing
cypress.com/go/automotive cypress.com/go/clocks
cypress.com/go/interface cypress.com/go/powerpsoc
cypress.com/go/plc cypress.com/go/memory
cypress.com/go/image cypress.com/go/psoc cypress.com/go/touch

USB Controllers Wireless/RF
cypress.com/go/USB cypress.com/go/wireless

PSoC Solutions psoc.cypress.com/solutions PSoC 1 | PSoC 3 | PSoC 5

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress.

Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

All products and company names mentioned in this document may be trademarks of their respective holders.

Page 10 of 10
[+] Feedback

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CY2CC910OXCT Datasheet file may be downloaded here without warranties.

Datasheet ID: CY2CC910OXCT 507748