DFR0208
DFR0208 Datasheet
SKU DFR0208
| Part | Datasheet |
|---|---|
DFR0208 |
DFR0208 (pdf) |
| PDF Datasheet Preview |
|---|
| Lithium Battery Charger SKU DFR0208 INTRODUCTION If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the datasheet below to see if it will work with your battery. The board incorporates a charging circuit, status LED, connector for your battery JST-type used in the batteries we carry , and a micro-USB connector. Four small mounting holes allows this charger to be easily embedded into a project. SPECIFICATION • Programmable Charge Current:Up to 1000mA • Constant-Current/Constant-Voltage • Types of battery:Single-cell Li-Ion or Li-Polymer batteries • Interface o Charge from Micro USB o JST-type or terminal connect to battey • With ON/OFF switch,3 status LEDs • Accuracy:1.5% Preset 4.2V Charge Voltage • C/10 Charge Termination • Operating Ambient • Size:3.2x2.7x1cm 1.26"x1.06"x0.39" SHIPPING LIST • Lithium Battery Charge x1 Powered By DFRobot 2008-2016 |
| More datasheets: AT49BV3218-90CI | AT49BV3218-90TI | AT49BV3218T-11CI | AT49BV3218T-11TI | AT49BV3218T-90CI | AT49BV3218T-90TI | VAOM-A12571S-BW/40 | VAOM-C12571S-BW/40 | CER0849B | BC42-12 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0208 Datasheet file may be downloaded here without warranties.