Xbee USB adapter FTDI ready SKU:DFR0050
Part | Datasheet |
---|---|
![]() |
DFR0050 (pdf) |
PDF Datasheet Preview |
---|
Xbee USB adapter FTDI ready SKU:DFR0050 INTRODUCTION The upgraded DFRobot Xbee USB adapter is designed for the XBee module configuration parameters to facilitate using or to work as a FTDI writer. The new version of Xbee USB adapter is also welded with the female pin for FTDI so that users can directly use the adapter as a FTDI program writer, such as Arduino and so on. It's a must-have for interactive electronic installations and projects. The adapter allows the PC to configure XBee / Bluetooth module and the controller / development board for wireless data transmission via mini USB cable. You can upload your program through the wireless controller module, or conduct wireless realtime data transmission. The adapter uses a FTDI232 USB-UART converter chip to ensure stable and reliable data transmission. • Used for the XBee module configuration parameters • Easily connected to a PC via mini USB cable • XBee-setting support software X-CTU • Also used as a USB-TTL adapter • Voltage +5V USB Power Powered By DFRobot 2008-2017 |
More datasheets: FQP7N65C | 55642.55011 | AK-ESATA-SB1-R | FJH1102 | 1/2-5-5915 | 3/4-5-5915 | 3YDL | 74F821SC | 74F821SPC | 74F821SCX |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0050 Datasheet file may be downloaded here without warranties.