35013

35013 Datasheet

35013 - ESD BADGE HOLDER, CLIP-ON, HORIZ, 4-5/16INx33/8IN

Part	Datasheet
35013	35013 (pdf)

PDF Datasheet Preview
35013 - ESD BADGE HOLDER, CLIP-ON, HORIZ, 4-5/16INx33/8IN Ideal for use by electronic manufacturers working with ESD sensitive components Highly visible with yellow header and ESD Symbol allowing people to immediately know the badge holder is ESD protective Dissipative Rtt 10E6 to 10E10 ohms per ANSI/ESD S11.11 Tribocharging Less than 100 volts Made with a custom dissipative material made exclusively for Desco Industries and not available anywhere else! Available in horizontal and vertical, clip or no clip We can do Customs just let us know your insert size! Genuine Made In America accept no substitutes This item is made and stocked in Chino, CA. Estimated Shipping Weight Pounds If you have an ESD Badge Holder, send it to us and we will test it at No Charge and send you a Menda one at No Charge! “It should be understood that any object, item, material or person could be a source of static electricity in the work environment. Removal of unnecessary nonconductors, replacing nonconductive materials with dissipative or conductive materials and grounding all conductors are the principle methods of controlling static electricity in the workplace, regardless of the activity.” [ESD Handbook ESD TR20.20-2008 section Sources of Static Electricity] Drawings 35010 - ESD Badge Holders 3651 Walnut Ave., Chino, CA 91710 Phone 909 627-2453 Fax 951 755-8848 Site Map \| Terms & Conditions \| Privacy Policy \| Affiliated Brands Copyright 2011 Desco Industries, Inc. All rights reserved.

PDF Datasheet Preview

35013 - ESD BADGE HOLDER, CLIP-ON, HORIZ, 4-5/16INx33/8IN

Ideal for use by electronic manufacturers working with ESD sensitive components Highly visible with yellow header and ESD Symbol allowing people to immediately know the badge holder is ESD protective Dissipative Rtt 10E6 to 10E10 ohms per ANSI/ESD S11.11 Tribocharging Less than 100 volts Made with a custom dissipative material made exclusively for Desco Industries and not available anywhere else! Available in horizontal and vertical, clip or no clip We can do Customs just let us know your insert size! Genuine Made In America accept no substitutes This item is made and stocked in Chino, CA. Estimated Shipping Weight Pounds If you have an ESD Badge Holder, send it to us and we will test it at No Charge and send you a Menda one at No Charge! “It should be understood that any object, item, material or person could be a source of static electricity in the work environment. Removal of unnecessary nonconductors, replacing nonconductive materials with dissipative or conductive materials and grounding all conductors are the principle methods of controlling static electricity in the workplace, regardless of the activity.” [ESD Handbook ESD TR20.20-2008 section Sources of Static Electricity]

Drawings 35010 - ESD Badge Holders
3651 Walnut Ave., Chino, CA 91710 Phone 909 627-2453 Fax 951 755-8848

Site Map | Terms & Conditions | Privacy Policy | Affiliated Brands Copyright 2011 Desco Industries, Inc. All rights reserved.

More datasheets: AMB1950 | 100325QCX | 100325SC | 100325QIX | 100325QI | 100325SCX | 100325QC | QFBR-S01EK001Z | DN-900GX | DN-900G

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 35013 Datasheet file may be downloaded here without warranties.

Datasheet ID: 35013 508548